Upgrade your BMW E90 or E92 with the BMW E90 E92 Stock Replacement Brake Kit for the rear wheels. This brake kit offers a reliable and efficient replacement solution for worn-out or damaged brake components.

• Designed specifically for BMW E90 and E92 models
• Includes all necessary components for a complete rear brake replacement
• Ensures optimal braking performance and safety
• Direct fitment for easy installation

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

• Better stopping power even when the pads are cold
• Good initial bite (more than on Hawk HPS)
• Excellent resistance to fade during street use
• Moderate dust during normal street driving
• Quiet operation
• Easy on rotors

Fits the following BMWs:
E60 E63 E64 E65 E66 E82 E9X E71

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

• Better stopping power even when the pads are cold
• Good initial bite (more than on Hawk HPS)
• Excellent resistance to fade during street use
• Moderate dust during normal street driving
• Quiet operation
• Easy on rotors

This pad set includes pads for both Front and Rear brakes. 

This item fits the following BMWs:
2006-2013 E9X BMW 335i/is/xi/d
2013-2015 E84 BMW sDrive28i xDrive28i xDrive35i

Enhance Your Vehicle's Braking Performance with the Power Stop Z23 Evolution Sport Brake Kit

If you're in search of a fast, easy, and cost-effective way to boost your braking system's performance and cooling, look no further than the Power Stop Z23 Evolution Sport Brake Kit. This all-inclusive kit delivers a complete solution for your braking needs, featuring perfectly matched rotors and Power Stop Evolution carbon-fiber ceramic brake pads. It also includes upgraded stainless steel hardware, new pin bushings, and high-temperature brake lubricant.

The Power Stop Evolution brake pads are engineered to produce minimal dust, enhance stopping power, reduce brake noise, and maintain optimal drivability for your everyday needs. Say goodbye to noisy stops and excessive dust while enjoying improved brake performance.

The rotors in this kit are meticulously upgraded to meet the demands of performance braking. They feature precision drilling to enhance cooling, rounded slots on the friction surface to clear gas and debris effectively, and a Silver Zinc Dichromate plating that not only adds a stylish finish but also provides rust and corrosion prevention. This plating eliminates the formation of the typical rust lip, ensuring the rotors remain robust and reliable even after extended use.

Upgrade your braking performance affordably and effortlessly with the Power Stop Z23 Evolution Sport Brake Kit. This kit contains precisely matched rotors and pads with upgraded stainless steel hardware, new pin bushings, and high-temperature brake lubricant for a complete brake enhancement.

The Power Stop Evolution carbon-fiber ceramic brake pads in this kit reduce dust production, enhance stopping power, and maintain everyday drivability while minimizing brake noise for noise-free braking in all conditions.

The upgraded rotors undergo precision drilling for improved cooling, feature rounded slots on the friction surface to eliminate gas and debris effectively, and are coated with Silver Zinc Dichromate plating. This coating prevents rust and corrosion, maintaining a clear contact patch for smooth, safe braking while preventing rust lip formation and potential weak points after extended use.

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2008-2013 E82/88 BMW 135i, 128 with BMW Performance caliper conversion
2006-2009 E9X BMW Submodels with BMW Performance caliper conversion

RSL19 A favorite of BMW's Motorsport engineers, the Pagid RSL19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers. 

This is the set of Rear pads.

This item fits the following BMWs:
2004-2010 E60 BMW 535i 545i 550i M5
2004-2011 E63 E64 BMW 645ci 650i M6
2011+ E82 BMW 1M - Coupe
2008-2013 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible