Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Enhance Your BMW's Appearance with M Styling

Transform your BMW's appearance with this replacement rear bumper, adding aggressive M styling to your vehicle. Available in primer, this bumper is ready for painting, allowing you to customize the look of your BMW effortlessly. Specifically designed for compatibility with quad-tip (Dual-exit) exhaust systems, it ensures a seamless integration with your vehicle's existing setup.

• Adds aggressive M styling to your BMW
• Primer finish ready for painting
• Compatible with quad-tip (Dual-exit) exhaust systems
• Easy to install and customize

Upgrade the rear appearance of your BMW with the Turner Motorsport E90 M-Sport Style Rear Bumper Conversion. This brand new bumper conversion adds aggressive M-Sport styling to your car, enhancing its overall look and appeal. With a spot-on fitment and primed finish, this bumper is ready for paint, making installation a breeze.

Key Benefits:

• Adds aggressive M-Sport styling to your BMW
• Enhances the rear appearance of your car
• Spot-on fitment ensures easy installation
• Primed finish ready for paint customization

Clinched Universal Fender Flares

Crafted from high-quality, impact-resistant ABS plastic, Clinched manufactures universal fender flares suitable for various makes and models, including BMWs. These flares, akin to OE bumpers, offer exceptional strength combined with lightweight properties. Universally designed, they require minimal customization for installation. You have the option to seamlessly blend them with your car's body or leave them with exposed rivets and edges for a distinct look. Please note, installation involves drilling and cutting the original fenders. Using a heat gun (or hair dryer) aids in molding the flares to conform to your vehicle's factory body lines, thanks to their high pliability, setting them apart from fiberglass alternatives.

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2013 BMW E90 M3

Clinched Fender Flares: Versatile and Impact-Resistant

Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.

Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.

To keep wind drag on the rear end of your E90 335i, HARD Motorsport has developed their lightweight Aluminum Rear Diffuser Kit. It reduces undercar drag, allowing for optimal downforce.

Diffuser is unpainted and does not work with stock exhaust. Straight pipes or custom exhaust work recommended.

Fits the following vehicles:

2006-2013 E90 BMW 335i 

Introducing the BMW E90 M3 Style Front Bumper Conversion - BMW E90/91 325i/xi 328i/xi 330i/xi 335i/xi Pre-Facelift

A premium upgrade for your BMW E90 series vehicle, this front bumper conversion offers the aggressive styling of the M3 model, enhancing both the appearance and performance of your car. Specifically designed for BMW E90/91 325i/xi, 328i/xi, 330i/xi, and 335i/xi pre-facelift models, this conversion kit ensures a perfect fit and easy installation.

Elevate your driving experience with the following benefits:

• Transforms the look of your BMW E90 into the iconic M3 style
• Enhances aerodynamics for improved performance
• High-quality construction for durability and longevity

Upgrade your BMW E90 with this M3 style front bumper conversion and turn heads wherever you go.

Elevate your E90's look with the BMW-crafted M Sport front bumper cover. This upgrade is expertly designed to add an aggressive edge to your vehicle, distinguishing it from the standard stock appearance.

The package includes:

• Front bumper cover
• Fog lamps
• Lower grilles
• Tow hook cover

Note: Fender liners and air ducts are not included in this set.

Enhance your BMW's aerodynamics and aesthetics with this Carbon Fiber spoiler. Crafted from high lightweight carbon fiberglass, this spoiler offers maximum strength and adjustability. Its aerodynamic design provides both striking good looks and maximum downforce.

• Crafted from high lightweight carbon fiberglass
• Maximum strength and adjustability
• Aerodynamic design for maximum downforce
• Includes special NRG Logo side mounts
• Easy installation with all components and bolts included

HARD Motorsport's Motorsport Chassis Mount Wing Upright kit has everything you need to mount a rear wing to your E90 BMW. the brackets mount directly to the chassis making sure that all downforce is applied right where it is needed and not just the upper trunk area, helping to keep the low center of gravity. The upright supports match the original profile of the OEM trunk to keep it looking just as clean as it is functional. All supports are made from sturdy, lightweight aluminum. Includes all needed mounting hardware.

One of the main benefits, in addition to improved handling, is that it keeps the trunk completely functional. It uses a unique lock-pin design that that connects the upper and lower supports without requiring other special brackets or mounting points.

Product fits the following vehicles:

E90 BMW All submodels

These 3D Design side skirts were designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, they attach easily and accentuate your BMW's natural body lines, creating a high-class performance look. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.