BMW Engine Parts for BMW 3 Series E90 (2006-2011)

Upgrade your BMW's oil or transmission cooling system with the Turner Motorsport Genuine O-Ring, part number 17222245358. This high-quality O-ring is designed to provide a reliable seal, ensuring optimal performance and preventing leaks in your BMW's vital systems. Additionally, it is compatible with MINI applications, where it is commonly used on the end of the parking brake cable.

• Genuine BMW part for guaranteed quality and compatibility
• Prevents leaks in the oil and transmission cooling systems
• Ensures optimal performance of vital components
• Compatible with MINI applications for versatile use

Bosch ZGR6STE2 spark plug for N54 engines (twin turbo charged 3.0 liter). Listed as BMW part #'s 12120037244 and 12120034087. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This spark plug fits the following BMWs with N54 engine:

2008-2010 E82 BMW 135i 1M Coupe
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2009-2010 F01 F02 BMW 740i 740li
2008-2010 E71 BMW X6 xDrive35i
2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is

This exhaust backpressure sensor is a critical component of your vehicle's Diesel Particulate Filter (DPF) system, designed to monitor backpressure levels and trigger the regeneration cycle when needed. By ensuring the DPF operates efficiently, this sensor helps maintain optimal engine performance and prolongs the life of your powertrain.

A malfunctioning sensor is a common cause of check engine lights and DPF-related fault codes. If you're encountering issues with regeneration or fault codes, replacing the faulty sensor is essential to restore proper functionality. Choose this high-quality replacement from Bremmen for a reliable solution to keep your DPF system performing at its best.

Schwaben Professional Mechanic's Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

Designed for precision, these gloves offer high dexterity, making it easy to handle even the smallest parts. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Note: See manufacturers information tab for sizing chart.

Key Features:

• High Dexterity: Perfect for picking up small parts with ease.
• Secure Fit: Tailored elastic cuff with a hook-and-loop closure.
• Enhanced Grip: Textured latex coating on palm and fingertips.
• All-Day Comfort: Breathable spandex backing and knit top.
• Durable Design: Synthetic leather palm for extended wear.
• Unique Style: Graphic design inspired by the drifting culture of Euro owners.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Hardware to replace the coarse-thread screws originally used to mount components to the plastic valve cover.

Factory and aftermarket valve covers are made from plastic and use coarse-thread screws designed specifically for plastic. When upgrading to an aluminum valve cover, this hardware can no longer be used, as it will not properly thread into aluminum.

This kit includes all necessary hardware required to mount the factory components onto your upgraded aluminum valve cover.

Included Hardware:

2 × M6 × 1.0 × 40 mm bolts

4 × M6 × 1.0 × 20 mm bolts

2 × M6 × 1.0 × 12 mm bolts

Plastigage Set is an essential tool for accurately measuring the clearances of engine rod and main bearings without the need for expensive micrometers. This set is ideal for ensuring proper engine assembly by helping you choose the correct size replacement bearing inserts. Designed to cover all automotive engines, the Plastigage Set provides precise measurements to maintain optimal engine performance.

• Accurate Measurements: Measures clearances of engine rod and main bearings, ensuring proper fitment.
• Cost-Effective: Eliminates the need for expensive micrometers, offering a budget-friendly solution.
• Universal Application: Suitable for all automotive engines, making it versatile for various applications.
• Complete Set: Includes sizes .001" - .003" (green) and .002" - .006" (red) to cover a wide range of measurements.

1/2"/12mm Band Hose Clamp

For reliable hose fastening, opt for the top-tier 1/2"/12mm Band Hose Clamp. Engineered for durability and versatility, this hose clamp ensures secure connections in various applications. Invest in quality and maintain optimal functionality with this essential accessory.

• Versatile clamp suitable for various hose sizes
• Durable construction ensures long-lasting performance
• Provides a secure seal for optimal functionality
• Easy to install and adjust for convenience

If you are having boost leaks or if  you remove the intake manifold for any reason, this seal must be replaced to prevent any leaks from forming.  These are sold individually - a total of 6 are on the car.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
M57 3.0L Diesel