BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips feature a stunning matte titanium finish and a slant-cut, single-wall outlet for a sleek appearance. Engineered for durability, they include chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Elegant matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a refined look
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

There are many benefits to installing harnesses in your E90 -

• maintain a proper driving position
• keep you planted in the seat and not bracing with your left leg or shoulder
• lower lap times thanks to improved driver confidence
• advanced technology is safer than standard 3-point belts
• Schroth Quick-Fit harness integrates with standard tensioner and airbag logic

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Schroth Quick Fit line of tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.

Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Tuning harnesses are TUV approved.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

QuickFit Harness Summary:

• Suggested Use:  track, autocross, daily driver
• Shoulder Belt:  2" pull down
• Lap Belt:  2" pull down
• Buckle:  Rallye push button
• Installation:  click in/click out with stock receptacles; partial permanent bolt-in
• Seat Compatability:  approved only for stock seats
• HANS compatible?  No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

This item is required by most organized race events. Remote pull kits allow corner worker to easily turn the power off on your car in the case of an emergency. This kit has a loop end that can easily be installed through body seams, eliminating the need to drill holes. Kit can also be mounted in dash for easy driver access. Includes 6' red pull cable, Mounting bracket, cable end and full installation instructions. Can be used on several different battery disconnect switches.

Installation instruction HERE.

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 10mm locking collar can be found HERE.