Genuine BMW Intercooler Boost Pipe - E90 N54 3.0L

T#:36971

Part#: 11657556551

Ships in 2 Business Days

2% off MSRP $ 460.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 451.99 USD

Add to Wish List

Qty

2% off MSRP

$ 460.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 451.99 USD

Add to Wish List

Genuine BMW Charge Air Induction Tract -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N54,N54T

MMX Performance Intercooler - E8x/E9x N54/N55

T#:4552021

Part#: MMR05-0201

Special Order: No Guaranteed ETA

$ 766.99 USD

Add to Wish List

Qty

$ 766.99 USD

Add to Wish List

N54 and N55 powered BMW's are infamous for their accessibility to easy power gains, and addressing the amount of heat that the engine puts out goes hand in hand towards reaching those numbers. MMX's Performance intercooler is a step up from the stock intercooler which now delivers even better cooling and provides rom for more power to the wheels. This intercooler possesses a larger core and more surface area than the stock intercooler which both reduces pressure drop and improves cooling. This results in a 20ºC temp drop for the intake and about a 20bhp increase to the wheels. This is a direct replacement for the factory intercooler and fully reversible. All required hardware is included. Precision TIG-welded throughout 20%+ larger core volume Efficient bar and plate core Typical intake temperature reduction of 20ºC over OE Increases power and torque, even with standard boost pressure OE-style charge pipe connections for easy installation Anti-corrosive thermal black finish MMR logo Can be installed in under an hour

Show More Show Less

MMX Charge Pipe Kit - N54 E8x/E9x

For Vehicles with N54 Engine

T#:4538267

Part#: MMR02-0101

Special Order: No Guaranteed ETA

$ 311.99 USD

Add to Wish List

Qty

$ 311.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N54-powered E8x/E9x. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Replacement high-flow aluminum charge pipe with CNC leak-free connection Silicone coupler hose and two stub hoses Replacement c-clip Jubilee clips o-ring

Show More Show Less

Upper Intake Charge Pipe

For vehicles with a production date up to 03/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:8485520

Part#: 13717599294

Special Order: No Guaranteed ETA

Sale - Save 20% $ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.35 USD

Add to Wish List

Qty

Sale - Save 20%

$ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.35 USD

Add to Wish List

Upper Intake Charge Pipe

For vehicles with a production date from 03/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:8485521

Part#: 13717615026

Special Order: No Guaranteed ETA

Sale - Save 20% $ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.35 USD

Add to Wish List

Qty

Sale - Save 20%

$ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.35 USD

Add to Wish List

BladeRunner Intercooler Coupling & Clamp Kit - E9x 335i N54 aFe Inter...

T#:557906

Part#: 46-20240AA

Back Ordered

$ 144.00 USD

Add to Wish List

Qty

$ 144.00 USD

Add to Wish List

These 5-ply silicone reinforced couplers are capable of withstanding high temperatures and include new hose clamps. Designed for aFe intercooler and aFe tubes.

Fits the Following BMWs:

E90 E92 E93 335i N55

Show More Show Less

Genuine BMW Intake Manifold with Flap Control - E90 E70

Includes gaskets.

T#:36685

Part#: 11618519140

Back Ordered

4% off MSRP $ 1,379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,317.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,317.99 USD

Add to Wish List

Genuine BMW Intake Manifold With Flap Control -
This item fits the following BMW Chassis:
E70 X5,E90

Fits BMW Engines including:
M57

aFe Pro Stage 2 Dynamic Carbon Fiber Air Intake System -- E9X N52 3.0...

T#:392911

Part#: 52-81013

Back Ordered

Sale - Save 4% $ 747.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 714.82 USD

Add to Wish List

Sale - Save 4%

$ 747.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 714.82 USD

Add to Wish List

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 12 horsepower and 16 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Show More Show Less

Plazmaman N54 Intake Manifold - BMW N54 (135i, 335i, 335is, 535i, Z4)...

2X Entries Into Our F80 M3 Sweepstakes

T#:51531915

Part#: VTT-PLAZMAMAN-1

Back Ordered

$ 2,039.99 USD

Add to Wish List

Qty

$ 2,039.99 USD

Add to Wish List

The Plazmaman N54 Intake Manifold is a premium performance upgrade for the BMW N54 engine.

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

T#:369781

Part#: 30-3000

In Stock

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

T#:589404

Part#: N54-PORTINJCONMO

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

T#:20815166

Part#: 30-3313

Ships in 1-3 days

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

T#:380988

Part#: SNO210

In Stock

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.

Show More Show Less

SnowPerformance Stage 3 Boost Controller - N54 N55

T#:380432

Part#: 60061

Ships in 2 Business Days

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

This stage 3 boost controller will easily upgrade your existing stage 2 kit to stage 3. This digital boost controller gives you the ability to easily dial in your setup - simply set your start and full points, and the software handles the rest. Two buttons allow you to make adjustments. The LCD display shows boost pressure, fuel injector duty cycle, and flow percentage.

Features:

LCD Screen
Digital Variable mapping
Comprehensive Instructions

Show More Show Less

4 Cylinder Direct Port Water Methanol Upgrade - Black Line

T#:583754

Part#: SNO-94500-BLK

In Stock at Vendor

$ 208.99 USD

Add to Wish List

Qty

$ 208.99 USD

Add to Wish List

Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI) ...

T#:556344

Part#: 60500

In Stock at Vendor

$ 312.99 USD

Add to Wish List

Qty

$ 312.99 USD

Add to Wish List

Stage 3 Boost Cooler (Direct Injection) - Braided Line

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 3 Series E90 (2006-2011)

Sub-Categories

Genuine BMW Intercooler Boost Pipe - E90 N54 3.0L

MMX Performance Intercooler - E8x/E9x N54/N55

MMX Charge Pipe Kit - N54 E8x/E9x

Upper Intake Charge Pipe

Upper Intake Charge Pipe

BladeRunner Intercooler Coupling & Clamp Kit - E9x 335i N54 aFe Inter...

Genuine BMW Intake Manifold with Flap Control - E90 E70

aFe Pro Stage 2 Dynamic Carbon Fiber Air Intake System -- E9X N52 3.0...

Plazmaman N54 Intake Manifold - BMW N54 (135i, 335i, 335is, 535i, Z4)...

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

AEM V3 Water/Methanol Injector Kit (Qty 2)

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

SnowPerformance Stage 3 Boost Controller - N54 N55

4 Cylinder Direct Port Water Methanol Upgrade - Black Line

Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI) ...

Stage 3 Boost Cooler (Direct Injection) - Braided Line

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

AEM Water/Methanol Injection System

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results