BMW Intake Parts for BMW 3 Series E90 (2006-2011)

If you already have the ECS open cone filter for you N54 car then this is the perfect add-on upgrade for your system to really clean up the engine bay and keep your cone filters much cleaner. When you upgrade to the enlcosed filter kit your filters will be surrounded more more consistent cold air and by protecting the filter from engine bay dirt you are reducing the risk of air flow problems from build up.

The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.

Features:

• Designed and engineered using CAD technology for optimal flow and fitment
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

Includes $25 Turner Motorsport gift card for the month of June!

Wagner intercoolers (#200001029) are engineered in Germany to be a superior M57 intercooler than the factory part. With 50% more frontal area than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and Wagner has chosen the stepped design to maximize the available surface area in the front end. The step is a thicker bar and plate core with an additional set of rows on top that takes advantage of un-used space in the nose. In our eyes, the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.

Compared to the Stock OEM intercooler:

One of the best features of this kit is how easy it is to install (the easiest we have used to date). It's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Core size measures 20.5"x5.1"x8.25". Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the E90 335d Fits M57 cars.

Features:

• High Performance Intercooler Core with Turbulators
• 70% bigger core, exposed Core Volume 12530cm Volume (OEM 7293cm Volume)
• 50% bigger frontal area, 1040cm square (OEM 676cm square)
• CAD / FEM optimized Aluminum Cast Endtanks, CNC Machined couplers
• Plug & Play Installation,
• No Cutting,
• No Bumper removal required
• Uses Stock Plumming

This FMIC fits the following BMWs:
2008-2011 E90 BMW 335d - Sedan

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2007-2010 BMW 335i (E9X) L6-3.0L (tt) N54 engines, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed gains up to +14 horsepower and +18 lbs. x ft. without any type of tune, and dropped the intake air temperature up to 10 degrees.

End Tanks: 
The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection.

5" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory.

TIG-Welded:
100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.

Pressure Tested: 
The BladeRunner Intercooler is test pressure rated at 200psi.

Perfect Fit:
Utilizes the factory mounting locations for a hassle-free installation. The billet 2 1/2" intercooler inlet utilizes a factory style quick connect to assure compatibility with the factory hot side inlet tube. The supplied cold side tube retains the factory style throttle body quick connect and retains the factory diverter valve connections. This kit will not work with the factory cold side intercooler tubing.

DETAILS:

• Up to +14 HP / +18 lbs. x ft. Torque max gains without any tuning
•  Lowers manifold intake air temperature by up to 10 degrees
•  2-1/2" Billet aluminum inlet and outlet for superior strength & durability
•  Incorporates the factory style quick connect adaptor for the hot side intercooler tube and throttle body connection
•  5" Bar and plate core design that is 29% larger than stock
•  This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability
•  1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
•  3" Upper cold-Side mandrel-bent aluminum tubing powder-coated wrinkle-black for heat resistance
•  5-Ply polyester reinforced silicone lower cold-side hose with metal inserts to withstand extreme amounts of boost pressure
•  Absolutely no cutting or modifications are needed for the installation of this intercooler kit

Fits the following BMWs:
2007-2010 E9X 335i w/ N54

This alloy hard pipe fits to the throttle body and incorporates dual high flow Blow off valves. These new valves, fresh from our R&D department are the largest displacement valves that Forge have ever made ! Featuring a 50mm (2”) aluminium pistons so that there are no issues with split diaphragms, we have not found the power handling limits of these valves yet ! The pistons uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.

All parts are included in the kit, for your installation, along with comprehensive instructions.

This product fits the following BMWs:
2008 - 2013 E82 135i 
2007 - 2013 E9x 335i

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is the adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. They are made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip.

This must be used in conjunction with  the Vargas billet check valve, and PCV delete fitting or requires plugging of the intake PCV ports. Installs inline on the throttle body, and adds a -8AN male to adapt to a catch cans, or any custom set up.

Made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip

This part fits the following BMW engines: 
2006-2012 N54