BMW Intake Parts for BMW 3 Series E90 (2006-2011)

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

AFE Summer Rebate Form

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

The Eventuri E9X M3 Carbon Fiber Plenum is crafted from 100% high-grade prepreg carbon, including the internal trumpets, replacing the stock plastic version. This upgrade enhances the acoustic experience of the naturally aspirated BMW V8 engine without impacting performance. Eventuri maintained the same internal volume as tuned by BMW to preserve the M3's power delivery characteristics.

While the carbon plenum doesn't offer a performance boost, it elevates the induction sound, transforming the M3's driving experience. The raw V8 rumble produced by the plenum imparts a CSL-like sound, creating an exhilarating driving sensation. Extensive testing with various carbon thicknesses has fine-tuned the sound, resulting in an astonishing induction volume and tone.

The Eventuri E9X M3 Carbon Fiber Plenum is compatible with both the OEM airbox and aftermarket intake systems. Pairing it with Eventuri's E9X M3 intake system unlocks genuine performance improvements.

The diverter valve is responsible for redirecting boost away from the intake when it's not needed. Other cars use a blow-off valve to vent the pressurized air into the atmosphere (the whoosh sound commonly heard on turbo engines) but BMW and other makers use a diverter valve to keep the air circulating through the intake for emissions purposes. A failing diverter valve will lead to a boost leak as turbocharged air leaks past the seals instead of going into the engine when you want it. This is a minor issue on stock engines but a bigger issue on tuned or heavily modded engines (those will use an aluminum diverter valve instead of the stock plastic). The factory diverter valve is plastic which is prone to cracking and electric which will fail without warning. This is a direct replacement diverter valve for cars with the N55 and S63 (X5M/X6M) engines.

N55 takes 1 diverter valve.
S63 takes 2 diverter valves (1 per turbo).

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5 X5,E71 X6,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36
S63 engine applies to X5M/X6M only. Fxx M5/M6 uses S63TU engine and does not use a diverter valve at all.

BMW E8X E9X DO88 47mm Turbo Inlet Hose is engineered to significantly enhance engine performance by improving airflow. Turner Motorsport offers this high-quality inlet hose to optimize turbo efficiency and overall power.

• Increased Airflow: Boasts 59% more airflow compared to standard hoses, allowing your engine to breathe more effectively.
• Reduced Backpressure: Designed to lower backpressure, enabling the turbo to intake more air for improved power and performance.
• Enhanced Performance: Supports higher power output and better throttle response, contributing to a more dynamic driving experience.
• High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability under high-stress conditions.

All of the tuning in the world is only as good as the weakest link. More boost in your 135/335 is great! But you will soon learn that some of the factory hardware is not up to the task of handling that extra pressure. One of the first things to fail and cause a boost leak are the factory boost diverter valves. This allows boost to "leak" out of the intake stream and a loss of power from the engine. This ECS Tuning chargepipe upgrade includes a blow-off valve in place of the factory diverter valves. The BOV is higher quality than the diverter valves and will exit intake air to the outside instead of putting it back through the turbo system (which will reduce strain on the turbos). This aluminum chargepipe is also much more robust than the stock plastic factory pipe and the connection to the throttle body is stronger, eliminating another failure point of the stock pipe.

Built-in 1/8" NPT ports allow you to run an additional methanol injection kit (bungs included if you don't want use the ports).

This is a complete kit that includes everything you need to replace the factory chargepipe and diverter valves -

powedercoat chargepipe ECS Tuning blow-off valve Includes three interchangeable BOV springs, allowing you to tailor venting function to your existing modifications. 1.9 (For use with factory software) 2.0 (Pre-installed in the SQV BOV - suitable for stock or "Stage One" software) 2.2 (Suitable for "Stage Two" software) vacuum plugs for the stock diverter valve hoses silicone hose connection to intercooler piping all hardware and hose clamps with instructions