BMW Suspension Bushings & Mounts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Powerflex Performance Polyurethane Rear Subframe Inserts - E82, E88, ...
Used to increase stiffness of stock subframe bushings
2X Entries For Our Spin To Win Sweepstakes!
Powerflex - Corporate Logo
T#:376535
Part#: PFR5-419X2
Ships in 1 Business Day
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. These poly inserts provide the inherent benefit of stiffness, which translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
Genuine BMW - Corporate Logo
T#:348679
Part#: 33506771738
In Stock
Sale - Save 18% $ 28.49

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.31 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 28.49

This product was last offered at the strikethrough price on
11-07-2026

$ 23.31 USD
Free Shipping on orders $49 and up
Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension.
Show More Show Less
OEM Lemforder Rear Subframe Mounting, Front - 33312283382 - E9X E82 R...
M3 rear subframe bushing, this is an upgrade for your vehicle
Lemforder - Corporate Logo
T#:398338
Part#: 33312283382
In Stock
$ 95.99

This product was last offered at the strikethrough price on
08-29-2026

$ 68.99 USD
Free Shipping
$ 68.99 USD
Free Shipping

Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

Upgrade for non-M vehicles!

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
2008 - 2013 E82 BMW 128i 135i 135is 1M Coupe
2008 - 2013 E9X BMW M3
2007 - 2013 E93 BMW 328i 335i
2007 - 2013 E92 BMW 328i 335i
2009 - 2011 E91 BMW 328i
2006 - 2009 E91 BMW 328i
2009 - 2012 E90 BMW 323i 328i 335d 335i
2006 - 2008 E90 BMW 323i 325i 328i 330i 335i

Show More Show Less

Rear Differential Mounts - Turner Solid Delrin Race - E82, E9X, F22, ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:1997
Part#: TDR9080BD2
In Stock
Sale - Save 20% $ 380.99

This product was last offered at the strikethrough price on
11-07-2026

$ 304.79 USD
Free Shipping
Sale - Save 20%
$ 380.99

This product was last offered at the strikethrough price on
11-07-2026

$ 304.79 USD
Free Shipping
Made in the USA TMS E90/E92/E82 (NON M) solid differential mounts are designed around current Grand Am Cup regulations, derived from, and currently used in TMS racecars. Thick Delrin casings are used as the non-metallic solid bushing. Replacing your differentials rubber mounts with this kit will result in a snappier feel when cornering and better suspension performance. You save money by never having to replace the stock rubber mounts that fail due to old age and fatigue. These bushings are CNC machined in the USA and made with high-grade materials.

These solid differential bushings/mounts fit the following BMWs:
2008-2012 E82 BMW 128i 135i
2014+ F22 BMW 228i 228iX M235i M235iX
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
Show More Show Less

Front Upper Strut Mount - Priced Each
For xDrive vehicles only
5X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:10128436
Part#: 31306785962
In Stock
$ 85.99

This product was last offered at the strikethrough price on
08-26-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Replace your worn-out mounts whenever servicing your suspension to maintain comfort and performance.
ECS Tuning Heavy Duty Front Strut Mount - E9X xDrive (Priced Each) ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
ECS - Corporate Logo
T#:30662819
Part#: 003865LA01
In Stock
Sale - Save 35% $ 98.99

This product was last offered at the strikethrough price on
11-07-2026

$ 64.34 USD
Free Shipping on orders $49 and up
Sale - Save 35%
$ 98.99

This product was last offered at the strikethrough price on
11-07-2026

$ 64.34 USD
Free Shipping on orders $49 and up

Due to their soft rubber construction, OE strut mounts are known to wear at an accelerated rate. Many high-mileage vehicles fall victim to strut mount failure, which is commonly associated with annoying clunks, groans, or rattles from the front suspension.

With this issue in mind, ECS Tuning developed their heavy-duty front strut mount with upgraded, higher durometer rubber to resolve sloppy handling and increase longevity. Manufactured precisely within OEM tolerances, these mounts are a perfect fit for your BMW.

Features:

Reduces deflection: Increases vehicle handling and cornering dynamics by removing deflection within the strut mount. Increases longevity: Upgraded rubber construction makes for a stiffer mount, less prone to cracking and general degradation. Developed in-house: Designed and tested by ECS Tuning engineers, this mount is sure to outlast an OE replacement. Upgrade to a better strut mount without sacrificing ride comfort! Improve longevity and ride control all at once.

Show More Show Less

Powerflex Performance Polyurethane Rear Subframe Bushing Set (Anti-sq...
This is an M specification bushing and is an upgrade for your vehicle
2X Entries For Our Spin To Win Sweepstakes!
Powerflex - Corporate Logo
T#:378981
Part#: PFR5-1220X2
Ships in 1 Business Day
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Raises front of the rear subframe giving additional anti-squat similar to the M range. For standard subframe location use PFR5-420. Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings. Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Show More Show Less
Whiteline - Corporate Logo
T#:558800
Part#: KDT918
In Stock
Sale - Save 20% $ 60.99

This product was last offered at the strikethrough price on
11-19-2026

$ 48.70 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 60.99

This product was last offered at the strikethrough price on
11-19-2026

$ 48.70 USD
Free Shipping on orders $49 and up

Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Features:

  • Performance - Whiteline's engineered "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling.
  • Durable - The advanced synthetic elastomer characteristics ensure superior elasticity, memory and outright durability for all forms of driving applications!
  • Resistant - Whiteline's synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering
  • Lubricant - Supplied with extreme pressure molybdenum disulphide (LM) based grease (where required) for extended life.
  • Installer Friendly - Designed with the installer in mind by reducing the need of specialized skills, tools and equipment.
  • Black - The neutral (black) appearance favored by restorers and racers.
  • Lifetime Warranty - All Whiteline bushing kits are backed by a lifetime warranty
Show More Show Less

Genuine BMW - Corporate Logo
T#:222082
Part#: 33522406280
Ships in 1-2 days
6% off MSRP $ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
Genuine BMW Repair Kit For Support Beari - 33522406280

Genuine BMW Trailing Arm Bushing - E82 E88 E90 E91 E92 E93
Located at the inner and outer positions of the rear trailing arm
Genuine BMW - Corporate Logo
T#:21813
Part#: 33326763092
Ships in 1-2 days
14% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up


Genuine BMW Rubber Mounting
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

Polyurethane Subframe Bushings - 95A - E90 E91 E92 E93 E82 E88 ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
ECS - Corporate Logo
T#:638054
Part#: 005686LA01KT
In Stock
Sale - Save 10% $ 286.99

This product was last offered at the strikethrough price on
11-07-2026

$ 258.29 USD
Free Shipping
Sale - Save 10%
$ 286.99

This product was last offered at the strikethrough price on
11-07-2026

$ 258.29 USD
Free Shipping
ECS Polyurethane Subframe bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Featuring 95A durometer polyurethane, ECS Polyurethane Subframe bushings are 25% stiffer than street bushings. Engineered to perform, ECS Polyurethane Subframe bushings offer a supreme level of control, while still maintaining enough comfort for the street. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure.

Key Benefits:

95A Polyurethane isolator reduces unwanted drivetrain movement while still allowing for an aggressive yet streetable driving experience.

Polyurethane bushings reduce subframe bushing deflection versus stock rubber bushings while keeping vibrations associated with such modification to a minimum.

Poly formulation and durometer, profile, and loaded surface area designed to minimize stress concentrations to stay within acceptable compressive strain limits of the material

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) ECS Polyurethane Subframe bushings were engineered to provide a balance of control while making ride quality more responsive, yet still streetable. As a factory bushings age, they become brittle and begin to harden and crack. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Show More Show Less
Rein - Corporate Logo
T#:379735
Part#: 31306775098
In Stock at Vendor
Sale - Save 3% $ 84.99

This product was last offered at the strikethrough price on
11-19-2026

$ 82.44 USD
Free Shipping
Sale - Save 3%
$ 84.99

This product was last offered at the strikethrough price on
11-19-2026

$ 82.44 USD
Free Shipping
Should be replaced each time shocks are replaced due to this being a wearing item on most BMWs.


Powerflex Black Series - Corporate Logo
T#:376381
Part#: PFR5-425BX2
Ships in 1 Business Day
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
Powerflex - Corporate Logo
T#:37048677
Part#: PFR5-417
In Stock
$ 245.99 USD
Free Shipping on orders $49 and up
Powerflex's PFR5-417 Rear Lower Shock Mounting Bushing and Bracket kit offers a stout lower anchor for even the most radical motorsport-derived shocks and coilovers. Powerflex has utilized its proprietary 93ShA Performance durometer bushings featuring a new conical design in order to better serve customers who expect tailored stiffnesses depending on vehicle use and NVH tolerance. These new bushings also feature CNC-machined 6082 aluminum brackets that help enhance longevity and weight reduction when compared with cheaper imitations.
Show More Show Less
Bav Auto Rear Subframe Bushing Press - E88 E9X BMW
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bav Auto Tools - Corporate Logo
T#:580432
Part#: B8800127
In Stock
Sale - Save 3% $ 428.99

This product was last offered at the strikethrough price on
11-07-2026

$ 416.12 USD
Free Shipping
Sale - Save 3%
$ 428.99

This product was last offered at the strikethrough price on
11-07-2026

$ 416.12 USD
Free Shipping
The Bav Auto Rear Subframe Bushing Press allows you to remove and install rear subframe bushings while the subframe is still in the vehicle, saving you several hours of labor.

Powerflex Performance Polyurethane Rear Upper Shock Mount Set - E9X M...
For vehicles without EDC
2X Entries For Our Spin To Win Sweepstakes!
Powerflex - Corporate Logo
T#:376484
Part#: PFR5-416-12X2
Ships in 1 Business Day
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping

Rear shock mounts are tasked with securing shocks while absorbing noise, vibration and harshness that would otherwise be associated with a solid mount. Factory rubber bushings are a compromise between a cushy ride and responsive handling.

Powerflex polyurethane rear shock mounts are firmer than OEM bushings, resulting in better handling, a more responsive rear-end, and more efficient suspension articulation - all with minimal sacrifice to ride quality.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

Show More Show Less

034Motorsport Billet Aluminum Rear Subframe Insert Kit - N52/N54/N55 ...
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
034Motorsport - Corporate Logo
T#:401909
Part#: 034-601-0047
In Stock
Sale - Save 15% $ 224.00

This product was last offered at the strikethrough price on
11-15-2026

$ 190.40 USD
Free Shipping
Sale - Save 15%
$ 224.00

This product was last offered at the strikethrough price on
11-15-2026

$ 190.40 USD
Free Shipping
034Motorsport is pleased to present Billet Aluminum Rear Subframe Mount Inserts for E9X BMW models! E9X BMWs use rubber rear subframe mounts which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. These precision-machined billet aluminum inserts are designed to fill voids in the factory rear subframe mounts, and limit subframe movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.
Show More Show Less
Powerflex Race Polyurethane Rear Subframe Bushing Set (Anti-squat) - ...
This is an M specification bushing and is an upgrade for your vehicle
2X Entries For Our Spin To Win Sweepstakes!
Powerflex Black Series - Corporate Logo
T#:379096
Part#: PFR5-1220BX2
Ships in 1 Business Day
$ 246.99 USD
Free Shipping
$ 246.99 USD
Free Shipping
Raises front of the rear subframe giving additional anti-squat similar to the M range. For standard subframe location use PFR5-420. Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings. Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Show More Show Less

OEM Lemforder Front Control Arm Bushing - E88 E82 E9X E84 Z4 ...
Located in the curved control arm or "thrust" arm
Lemforder - Corporate Logo
T#:362416
Part#: 31126763719
Ships in 1 Business Day
$ 53.99

This product was last offered at the strikethrough price on
07-15-2026

$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Race Polyurethane Rear Lower Control Arm Bushings, Inner Position Set...
Used in the inner position of the lowest arm housing the coil spring.
2X Entries For Our Spin To Win Sweepstakes!
Powerflex Black Series - Corporate Logo
T#:376443
Part#: PFR5-415BX2
Ships in 1 Business Day
$ 103.99 USD
Free Shipping
$ 103.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi 
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

Show More Show Less

Powerflex - Corporate Logo
T#:376564
Part#: PFF5-402X2
Ships in 1 Business Day
$ 178.99 USD
Free Shipping
$ 178.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less

Whiteline - Corporate Logo
T#:54388458
Part#: W22801
In Stock
New Item
Sale - Save 26% $ 28.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.50 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 28.99

This product was last offered at the strikethrough price on
10-23-2026

$ 21.50 USD
Free Shipping on orders $49 and up
Engineered to optimize rear roll stiffness and eliminate the dynamic compliance of aging factory components
Race Polyurethane Front sway Bar Bushing Set - E9X Non-M
2X Entries For Our Spin To Win Sweepstakes!
For models produced up to 05/2010
Powerflex Black Series - Corporate Logo
T#:384005
Part#: PFF5-4602-265BX2
Ships in 1 Business Day
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
Genuine BMW - Corporate Logo
T#:11952
Part#: E9XM3EDCMOUNTKIT
Ships on Dec 21, 2026
$ 742.99 USD
Free Shipping
$ 742.99 USD
Free Shipping
Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

This package is for cars WITH the EDC suspension.

Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33502283519
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33502283518
  • D. rear upper supporting cup, 33522283439 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs equipped with EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
  • Show More Show Less


    Rein Rear Lower Control Arm Bushing - Inner - 33326770829 - E9x, F80,...
    The lowest arm housing the coil spring.
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:393338
    Part#: 33326770829
    Ships on Dec 9, 2026
    Sale - Save 15% $ 23.99

    This product was last offered at the strikethrough price on
    11-14-2026

    $ 20.36 USD
    Free Shipping on orders $49 and up
    Sale - Save 15%
    $ 23.99

    This product was last offered at the strikethrough price on
    11-14-2026

    $ 20.36 USD
    Free Shipping on orders $49 and up
    Restore factory ride quality and handling. Made in Germany!
    Rear Subframe Bushing - Priced Each
    5X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:599854
    Part#: 33316758259
    In Stock
    $ 36.99 USD
    Free Shipping on orders $49 and up
    $ 36.99 USD
    Free Shipping on orders $49 and up
    The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
    Show More Show Less
    Powerflex - Corporate Logo
    T#:376430
    Part#: PFR5-422X2
    In Stock
    $ 174.99 USD
    Free Shipping
    $ 174.99 USD
    Free Shipping

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Show More Show Less

    Powerflex Black Series - Corporate Logo
    T#:376388
    Part#: PFR5-422BX2
    In Stock
    $ 194.99 USD
    Free Shipping
    $ 194.99 USD
    Free Shipping

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:19995
    Part#: 33556761002
    In Stock
    20% off MSRP $ 106.91

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 85.56 USD
    Free Shipping on orders $49 and up
    20% off MSRP
    $ 106.91

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 85.56 USD
    Free Shipping on orders $49 and up


    Genuine BMW Stabilizer Rubber Mounting - D=13Mm
    This item fits the following BMW Chassis:
    E90,E92,E93

    Powerflex Black Series BMW E9X 3 Series / X1 XDrive Front Sway Bar Bu...
    2X Entries For Our Spin To Win Sweepstakes!
    For models produced from 05/2010 and on
    Powerflex Black Series - Corporate Logo
    T#:33880031
    Part#: PFF5-5703X2-26.5
    Ships in 1 Business Day
    $ 80.99 USD
    Free Shipping on orders $49 and up
    The Powerflex Front Sway Bar Mounting Bushings (26.5mm) for the BMW E9X 3 Series and BMW X1 xDrive are performance-oriented replacements designed to enhance the function and lifespan of the factory sway bar bushings. Here’s an in-depth description of these bushings: Durable Polyurethane Material: Constructed from high-quality polyurethane, these bushings are far more resistant to wear and environmental factors like oil, heat, and road debris compared to traditional rubber bushings. This ensures long-lasting performance and reduced maintenance over time. Perfect Fit for 26.5mm Sway Bar: Specifically designed for vehicles with a 26.5mm sway bar diameter, these bushings provide a precise fit, allowing for optimal sway bar performance. The snug fit prevents excessive movement of the sway bar, leading to better control and stability during driving. Enhanced Handling and Body Control: By stiffening the connection between the sway bar and the vehicle’s chassis, these bushings help reduce body roll and improve handling. Drivers will experience sharper, more responsive cornering and a more confident feel during quick direction changes. Improved Steering Response: The stiffer polyurethane material ensures that the sway bar reacts more immediately to steering inputs, reducing the lag and sloppiness that can be caused by worn rubber bushings. This results in more precise and predictable handling, especially during spirited driving or on twisty roads. Resistant to Deformation: Unlike rubber bushings, which can crack, shrink, or soften over time, Powerflex polyurethane bushings are engineered to maintain their shape and performance even after prolonged exposure to stress and environmental conditions. This makes them ideal for both street and performance applications. Balanced Performance and Comfort: Powerflex designs their sway bar bushings to deliver performance gains without overly compromising ride comfort. While firmer than rubber, these bushings are optimized to limit increases in noise, vibration, and harshness (NVH), making them suitable for both daily driving and more aggressive driving scenarios. Direct OEM Replacement: These bushings are a direct replacement for the front sway bar bushings on the BMW E9X 3 Series and BMW X1 xDrive models, making installation straightforward and hassle-free. No modifications or additional hardware are needed, ensuring a smooth fitment process. Ideal for Performance Upgrades: Whether you’re looking to improve your vehicle’s handling for street driving or track use, these sway bar bushings offer enhanced performance, greater sway bar effectiveness, and increased durability, making them an essential upgrade for enthusiasts. In conclusion, the Powerflex 26.5mm Front Sway Bar Mounting Bushings for the BMW E9X 3 Series and X1 xDrive are an ideal solution for those seeking improved handling, greater durability, and a more connected driving experience. These bushings deliver performance upgrades while maintaining comfort for everyday driving.
    Show More Show Less

    Powerflex - Corporate Logo
    T#:376440
    Part#: PFR5-411X2
    In Stock
    $ 121.99 USD
    Free Shipping
    $ 121.99 USD
    Free Shipping

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:25594
    Part#: 33176760287
    Ships in 1-2 days
    3% off MSRP $ 62.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 60.99 USD
    Free Shipping on orders $49 and up
    3% off MSRP
    $ 62.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 60.99 USD
    Free Shipping on orders $49 and up

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. Genuine BMW bushings are the perfect option to restore suspension back to day 1 quality.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    Genuine BMW Rubber Mounting Front -
    This item fits the following BMW Chassis:
    E82,E90,E92,E93

    Show More Show Less

    Rear Upper Shock Mount Kit - E9x
    For vehicles without EDC
    Genuine BMW - Corporate Logo
    T#:341092
    Part#: E9X331263
    In Stock
    $ 137.42 USD
    Free Shipping
    $ 137.42 USD
    Free Shipping

    E9X / E84 Front Sway Bar Mounting Bushings 26.5mm - PFF5-5703-26.5 ...
    2X Entries For Our Spin To Win Sweepstakes!
    For models produced from 05/2010 and on
    Powerflex - Corporate Logo
    T#:22163380
    Part#: PFF5-5703-26.5
    In Stock
    $ 72.99 USD
    Free Shipping on orders $49 and up
    For BMW E9X 3 Series and X1 xDrive owners seeking to optimize their vehicle's performance, the 26.5mm Front Sway Bar Mounting Bushings emerge as a valuable enhancement. In this article, we delve into the multiple advantages of incorporating these bushings, which promise to elevate your driving experience to the next level. Enhanced Stability and Control: The BMW E9X 3 Series and X1 xDrive already boast impressive handling, but the installation of 26.5mm Front Sway Bar Mounting Bushings significantly enhances stability and control. By minimizing body roll during turns, these bushings deliver confidence and responsiveness when navigating sharp corners and bends. Precision in Cornering: These sway bar mounting bushings are prized for their ability to fine-tune your vehicle's cornering performance. With their 26.5mm diameter, they provide increased rigidity, resulting in more precise and controlled cornering. Whether you're tackling serpentine mountain roads or pushing your car on the racetrack, you'll enjoy heightened grip and command. Mitigation of Understeer: Understeer, a common challenge for many vehicles, occurs when the front tires lose traction during a turn. The 26.5mm Front Sway Bar Mounting Bushings address this issue by redistributing the load evenly between the front and rear tires. This optimization leads to better balance and control, ensuring that your BMW responds precisely to your commands. Longevity and Robustness: Constructed from high-quality materials, these bushings are built to withstand the demands of daily driving and spirited performance. By minimizing wear and tear on your suspension components, they contribute to the extended lifespan of your BMW's sway bar system and related parts. OE / OEM Cross Reference Numbers: 31356773512 Fits these BMW models: E90, E91, E92 - 325xi, 328xi, 330xi, 335xi E84 - X1 xDrive28i, X1 xDrive35i
    Show More Show Less
    Febi Front Ball Joint - E90, E91, E92
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:381946
    Part#: 31126768988
    Ships in 3 Business Days
    $ 54.33

    This product was last offered at the strikethrough price on
    11-02-2026

    $ 53.72 USD
    Free Shipping on orders $49 and up
    $ 53.72 USD
    Free Shipping on orders $49 and up
    Bolts to the curved control arm.
    Powerflex Black Series - Corporate Logo
    T#:4731076
    Part#: PFF5-401BLK
    Ships in 1 Business Day
    $ 180.99 USD
    Free Shipping on orders $49 and up
    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings. Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. This part fits the following BMWs: 2007- 2013 E88 1 Series Convertible 128i 135i 2008-2013 E9X BMW M3
    Show More Show Less


    Powerflex Black Series - Corporate Logo
    T#:376432
    Part#: PFR5-420BX2
    In Stock
    $ 226.99 USD
    Free Shipping
    $ 226.99 USD
    Free Shipping

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. ​

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

     

    Show More Show Less
    Race Polyurethane Subframe Inserts, Front Position Set - E8X, E9X ...
    Used to increase stiffness of stock subframe bushings
    2X Entries For Our Spin To Win Sweepstakes!
    Powerflex Black Series - Corporate Logo
    T#:376544
    Part#: PFR5-419BX2
    Ships in 1 Business Day
    $ 98.99 USD
    Free Shipping
    $ 98.99 USD
    Free Shipping

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    E9X All
    E8X All

    Show More Show Less
    SuperPro - Corporate Logo
    T#:385202
    Part#: SPF3953K
    In Stock at Vendor
    Sale - Save 40% $ 119.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 72.09 USD
    Free Shipping
    Sale - Save 40%
    $ 119.99

    This product was last offered at the strikethrough price on
    11-04-2026

    $ 72.09 USD
    Free Shipping
    While your stock bushings do a great job of insulating the cabin from a rough ride, they do little to improve road feel, and can cause slop in the suspension, allowing for unwanted movement – especially after they wear out. These SuperPro suspension bushings do a great job of locating your suspension components and helping you to feel more connected to the driving experience, while more efficiently managing the movement of your suspension. SuperPro has been manufacturing suspension components and bushings since 1983, and has always been at the forefront of polyurethane technology. SuperPro bushings are not merely polyurethane copies of your stock bushings – they are specifically developed to play to the strengths of their special blend of polyurethane and tested extensively to ensure that they are simply the highest performing components available. Due to this commitment to quality and performance, you can expect consistent quality, superior fitment, and a minimal increase in noise, vibration, & harshness (NVH).
    Show More Show Less

    Genuine BMW Rear Subframe Bushing
    Located in the rear position
    Genuine BMW - Corporate Logo
    T#:60072
    Part#: 33316758260
    Ships in 1-2 days
    3% off MSRP $ 132.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 128.99 USD
    Free Shipping
    3% off MSRP
    $ 132.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 128.99 USD
    Free Shipping


    Genuine BMW Rubber Mounting Rear -
    This item fits the following BMW Chassis:
    E82,E90,E92,E93


    Genuine BMW - Corporate Logo
    T#:15536
    Part#: 31356765574
    Ships in 1-2 days
    14% off MSRP $ 139.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 120.99 USD
    Free Shipping on orders $49 and up
    14% off MSRP
    $ 139.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 120.99 USD
    Free Shipping on orders $49 and up


    BMW Stabilizer Rubber Mounting - D=26,5Mm
    This item fits the following BMW Chassis:
    E82,E89 Z4,E90,E92,E93

    Genuine BMW Rubber Mounting Rear 33312283383
    M3 rear subframe bushing, this is an upgrade for your vehicle
    Genuine BMW - Corporate Logo
    T#:18978
    Part#: 33312283383
    Ships in 2 Business Days
    13% off MSRP $ 247.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 214.99 USD
    Free Shipping
    13% off MSRP
    $ 247.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 214.99 USD
    Free Shipping
    Genuine BMW REAR AXLE RUBBER MOUNTING REAR

    Genuine BMW - Corporate Logo
    T#:60348
    Part#: 33326770829
    Ships in 1-2 days
    14% off MSRP $ 55.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 47.99 USD
    Free Shipping on orders $49 and up
    14% off MSRP
    $ 55.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 47.99 USD
    Free Shipping on orders $49 and up

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    Genuine BMW Rubber Mount, Roll-Over Strut
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83
     

     

    Show More Show Less
    Genuine BMW Rear Subframe Bushing, Front Position - 33312283382 - E9X...
    M3 rear subframe bushing, this is an upgrade for your vehicle
    Genuine BMW - Corporate Logo
    T#:12526
    Part#: 33312283382
    Ships in 1 Business Day
    45% off MSRP $ 247.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 135.99 USD
    Free Shipping
    45% off MSRP
    $ 247.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 135.99 USD
    Free Shipping

    This is a OE BMW standard subframe bushing for an M3. For all other vehicles, this is an upgraded bushing with a higher durometer rating than stock.

    GENUINE BMW RUBBER MOUNTING FRONT:331020

    Show More Show Less

    Genuine BMW Front Upper Strut Mount
    For vehicles with sport suspension
    Genuine BMW - Corporate Logo
    T#:360813
    Part#: 31306775098
    Ships in 1-2 days
    14% off MSRP $ 199.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 172.99 USD
    Free Shipping
    14% off MSRP
    $ 199.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 172.99 USD
    Free Shipping

    Genuine BMW - Corporate Logo
    T#:360892
    Part#: 33526768544
    Ships in 1-2 days
    14% off MSRP $ 117.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 101.99 USD
    Free Shipping
    14% off MSRP
    $ 117.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 101.99 USD
    Free Shipping
    Genuine BMW - Corporate Logo
    T#:5077
    Part#: 31102283579
    Ships in 1-2 days
    9% off MSRP $ 90.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 82.99 USD
    Free Shipping
    9% off MSRP
    $ 90.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 82.99 USD
    Free Shipping
    These are the stock replacement front control arm bushings (FCAB) for the E82 1M and E9X M3 models. These solid rubber bushings replace the inner bushing on the front upper control arm, also known as the thrust arm or tension stut (it's the arm with the outer ball joint pointing down). These are the OEM bushings with a metal sleeve insert for precise but comfortable steering feel and response. A direct replacement for the E90/E92/E93 M3 and E82 1M. Professional installation recommended since these bushings need to be 'compressed' while they are being pressed in.

    This can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The solid rubber of the M3 is a better and longer-lasting bushing than the fluid-filled stock E90 bushing. These M3 bushings are a bit stiffer than the original design so the steering and handling will be sharper while maintaining M3-levels of ride comfort.

    Sold per bushing (order 2 for both sides).

    This item is a direct fit for the following BMWs:
    2008-2012 E82 BMW 1M
    2008-2012 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    This item is an upgrade for the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Show More Show Less
    Genuine BMW Front Strut Mount
    For vehicles with production date from 06/2008 For vehicles with standard suspension
    Genuine BMW - Corporate Logo
    T#:368109
    Part#: 31336760943
    In Stock
    13% off MSRP $ 120.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 104.99 USD
    Free Shipping
    13% off MSRP
    $ 120.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 104.99 USD
    Free Shipping


    Genuine BMW - Corporate Logo
    T#:222575
    Part#: 31122405864
    Ships in 1-2 days
    6% off MSRP $ 173.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 163.99 USD
    Free Shipping
    6% off MSRP
    $ 173.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 163.99 USD
    Free Shipping
    Genuine BMW Repair Kit For Radius Rod - 31122405864
    Genuine BMW - Corporate Logo
    T#:12714
    Part#: 31336775097
    Ships in 1-2 days
    13% off MSRP $ 147.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 128.99 USD
    Free Shipping
    13% off MSRP
    $ 147.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 128.99 USD
    Free Shipping
    The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.
    Genuine BMW

    Price is per mount. Left and Right are the same.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
    Show More Show Less