Emissions System for BMW 3 Series E91 (2006-2012)

Clear BMW chassis

Please ensure your correct model is selected

Is your BMW throwing emissions related codes? While we're primarily a BMW performance parts house, we understand the importance of maintaining your emissions system to pass inspection in your area and keep your check engine light off. Pick up your emissions related parts from Turner Motorsport.

Sub-Categories

Sort By:

Rear Bank 2 Post-Cat Oxygen Sensor - 490mm - E70 E83 E82/88 E9X (N5X ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:4934915
Part#: 3148030031
Ships on Oct 21, 2026
$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.
Show More Show Less
Rear Oxygen Sensor Set - N52, N54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:55353594
Part#: 11787545074/5KT2
In Stock
New Item
$ 366.99 USD
Free Shipping on orders $49 and up
Sluggish oxygen sensors do a lot more than just light up your dashboard with an annoying Check Engine Light—they directly choke your BMW’s performance.
Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56110313
Part#: 11787558055KT
In Stock
New Item
$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD
Free Shipping on orders $49 and up
$ 304.99 USD
Free Shipping on orders $49 and up
Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:221962
Part#: TMS221962
Ships in 1 Business Day
$ 458.99 USD
Free Shipping
$ 458.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:
  • 11617531423, Genuine BMW oil separator
  • 11617559530, vent hose
  • 11157522931, oil separator hose
  • 11157567801, return hose
  • 11157537701, extraction hose
  • 11617547242, intake manifold gaskets (set of 6)
    The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

    The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

    This kit fits the following BMWs:
    -10/2005 E90 BMW 325xi 330xi - Sedan
    -10/2005 E91 BMW 325xi - Wagon
    -10/2005 E60 BMW 525xi 530xi
  • Show More Show Less

    Oxygen Sensor
    For vehicles with Low Compression Engine
    5X Entries Into Our F80 M3 Sweepstakes
    Meyle - Corporate Logo
    T#:55353609
    Part#: 11787558054
    Ships on Oct 21, 2026
    New Item
    $ 134.99 USD
    $ 134.99 USD
    This Meyle pre-catalytic broadband oxygen sensor is a direct replacement for your tired, slow-responding factory sensor.
    Meyle Rear Bank 1 Post-Cat Oxygen Sensor - 560mm - E70 E83 E82/88 E9X...
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5944215
    Part#: 11787545074
    Ships on Oct 21, 2026
    $ 116.99 USD
    Free Shipping on orders $49 and up
    The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This is a Meyle oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
    Show More Show Less

    Meyle Oxygen Sensor - Pre-Cat Bank 2 - E9X E60 E82 N52
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5944212
    Part#: 11787558073
    Back Ordered
    $ 123.99 USD
    Free Shipping on orders $49 and up
    Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high-quality Meyle sensor to turn off your check engine light and restore fuel mileage. This is a Meyle oxygen sensor for BMWs with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Replacement for BMW # 11787558073 and 11787537984. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
    Show More Show Less