Packaged by Turner Oil Separation & Breather System for BMW 3 Series E91 (2006-2012)

Clear BMW chassis

Please ensure your correct model is selected

Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could experience rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.
Sort By:

Crankcase Oil Separator and Vent Hose Kit - E90 325xi/330xi, E60 525x...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:221962
Part#: TMS221962
Ships in 1 Business Day
$ 458.99 USD
Free Shipping
$ 458.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:
  • 11617531423, Genuine BMW oil separator
  • 11617559530, vent hose
  • 11157522931, oil separator hose
  • 11157567801, return hose
  • 11157537701, extraction hose
  • 11617547242, intake manifold gaskets (set of 6)
    The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

    The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

    This kit fits the following BMWs:
    -10/2005 E90 BMW 325xi 330xi - Sedan
    -10/2005 E91 BMW 325xi - Wagon
    -10/2005 E60 BMW 525xi 530xi
  • Show More Show Less

    Select Vehicle