BMW Suspension Parts for BMW 3 Series E91 (2006-2012)

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

10X Entries Into Our F80 M3 Sweepstakes

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 1% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.87 USD

Add to Wish List

Qty

Sale - Save 1%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.87 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Powerflex Performance Polyurethane Rear Differential Bushing Set - Re...

T#:376493

Part#: PFR5-426

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

Show More Show Less

E9X M3 Front Control Arm Upgrade Kit w/ Installation Hardware ...

Will add about .75 degrees of negative camber to the front for improved handling and ti...

10X Entries Into Our F80 M3 Sweepstakes

T#:30430683

Part#: 37142283867EKT2

In Stock

Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Qty

Sale - Save 14%

$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

E9X / F3X RWD Ride Height Adjuster Shim - PFR5-427

T#:22163423

Part#: PFR5-427

Ships in 1 Business Day

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Achieving an even ride height, particularly in rear-wheel-drive (RWD) vehicles, is vital for enhancing stability, handling, and overall performance. Replacing your stock adjuster shim with a Powerflex RWD Ride Height Adjuster Shim provides a dependable solution. In this article, we'll explore the numerous benefits of this upgrade, meticulously designed to level your vehicle and boost its performance. Enhanced Vehicle Balance: Uneven ride height can lead to imbalances in handling, resulting in reduced stability on the road. By opting for the Powerflex RWD Ride Height Adjuster Shim, you'll experience a more balanced ride, ultimately improving your vehicle's stability and road-handling capabilities. Precision in Handling: Achieving the ideal ride height is essential for precise handling. Replacing your stock shim with Powerflex's high-quality alternative enhances the precision of your vehicle's handling. This is especially critical for RWD vehicles that rely on rear-wheel traction for performance and control. Enhanced Comfort on the Road: Uneven ride height can contribute to discomfort during your drive, causing vibrations and instability. The Powerflex RWD Ride Height Adjuster Shim replacement effectively resolves these issues, resulting in a smoother and more comfortable ride. Whether you're on a long journey or navigating your daily commute, you'll appreciate the enhanced comfort. Longevity and Durability: Powerflex is synonymous with top-tier quality. The RWD Ride Height Adjuster Shim is crafted from high-quality materials, ensuring both durability and an extended service life. By minimizing wear and tear on your suspension components, this upgrade can prolong the lifespan of your vehicle's suspension system and related parts. OE / OEM Cross Reference Numbers: 33536769473

Show More Show Less

Powerflex Rear Lower Shock Mounting Bushings & Brackets - 93ShA Perfo...

T#:37048677

Part#: PFR5-417

In Stock

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Powerflex's PFR5-417 Rear Lower Shock Mounting Bushing and Bracket kit offers a stout lower anchor for even the most radical motorsport-derived shocks and coilovers. Powerflex has utilized its proprietary 93ShA Performance durometer bushings featuring a new conical design in order to better serve customers who expect tailored stiffnesses depending on vehicle use and NVH tolerance. These new bushings also feature CNC-machined 6082 aluminum brackets that help enhance longevity and weight reduction when compared with cheaper imitations.

Show More Show Less

BMW Motorsport Rear Sway Bar Bushing - 14-15mm - E90 E92 E82 ...

T#:3213

Part#: 33558300883

Ships on Nov 5, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644279

Part#: 31306763966-KT

Ships in 1 day

$ 518.74

This product was last offered at the strikethrough price on
08-28-2026

$ 516.08 USD

Add to Wish List

Qty

$ 516.08 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:14618151

Part#: 31306775098TKT

Ships in 1 day

$ 518.74

This product was last offered at the strikethrough price on
08-28-2026

$ 516.08 USD

Add to Wish List

Qty

$ 516.08 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

See kit contents tab for a list of included components.

Show More Show Less

E9X / E84 Front Sway Bar Mounting Bushings 26.5mm - PFF5-5703-26.5 ...

T#:22163380

Part#: PFF5-5703-26.5

In Stock

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

For BMW E9X 3 Series and X1 xDrive owners seeking to optimize their vehicle's performance, the 26.5mm Front Sway Bar Mounting Bushings emerge as a valuable enhancement. In this article, we delve into the multiple advantages of incorporating these bushings, which promise to elevate your driving experience to the next level. Enhanced Stability and Control: The BMW E9X 3 Series and X1 xDrive already boast impressive handling, but the installation of 26.5mm Front Sway Bar Mounting Bushings significantly enhances stability and control. By minimizing body roll during turns, these bushings deliver confidence and responsiveness when navigating sharp corners and bends. Precision in Cornering: These sway bar mounting bushings are prized for their ability to fine-tune your vehicle's cornering performance. With their 26.5mm diameter, they provide increased rigidity, resulting in more precise and controlled cornering. Whether you're tackling serpentine mountain roads or pushing your car on the racetrack, you'll enjoy heightened grip and command. Mitigation of Understeer: Understeer, a common challenge for many vehicles, occurs when the front tires lose traction during a turn. The 26.5mm Front Sway Bar Mounting Bushings address this issue by redistributing the load evenly between the front and rear tires. This optimization leads to better balance and control, ensuring that your BMW responds precisely to your commands. Longevity and Robustness: Constructed from high-quality materials, these bushings are built to withstand the demands of daily driving and spirited performance. By minimizing wear and tear on your suspension components, they contribute to the extended lifespan of your BMW's sway bar system and related parts. OE / OEM Cross Reference Numbers: 31356773512 Fits these BMW models: E90, E91, E92 - 325xi, 328xi, 330xi, 335xi E84 - X1 xDrive28i, X1 xDrive35i

Show More Show Less

Powerflex Street BMW E9X 3 Series - X1 XDrive Front Sway Bar Mounting...

T#:33880020

Part#: PFF5-5703-26.5BL

In Stock

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

The Powerflex Front Sway Bar Mounting Bushings (26.5mm) for the BMW E9X 3 Series and BMW X1 xDrive are performance-oriented replacements designed to enhance the function and lifespan of the factory sway bar bushings. Here’s an in-depth description of these bushings: Durable Polyurethane Material: Constructed from high-quality polyurethane, these bushings are far more resistant to wear and environmental factors like oil, heat, and road debris compared to traditional rubber bushings. This ensures long-lasting performance and reduced maintenance over time. Perfect Fit for 26.5mm Sway Bar: Specifically designed for vehicles with a 26.5mm sway bar diameter, these bushings provide a precise fit, allowing for optimal sway bar performance. The snug fit prevents excessive movement of the sway bar, leading to better control and stability during driving. Enhanced Handling and Body Control: By stiffening the connection between the sway bar and the vehicle’s chassis, these bushings help reduce body roll and improve handling. Drivers will experience sharper, more responsive cornering and a more confident feel during quick direction changes. Improved Steering Response: The stiffer polyurethane material ensures that the sway bar reacts more immediately to steering inputs, reducing the lag and sloppiness that can be caused by worn rubber bushings. This results in more precise and predictable handling, especially during spirited driving or on twisty roads. Resistant to Deformation: Unlike rubber bushings, which can crack, shrink, or soften over time, Powerflex polyurethane bushings are engineered to maintain their shape and performance even after prolonged exposure to stress and environmental conditions. This makes them ideal for both street and performance applications. Balanced Performance and Comfort: Powerflex designs their sway bar bushings to deliver performance gains without overly compromising ride comfort. While firmer than rubber, these bushings are optimized to limit increases in noise, vibration, and harshness (NVH), making them suitable for both daily driving and more aggressive driving scenarios. Direct OEM Replacement: These bushings are a direct replacement for the front sway bar bushings on the BMW E9X 3 Series and BMW X1 xDrive models, making installation straightforward and hassle-free. No modifications or additional hardware are needed, ensuring a smooth fitment process. Ideal for Performance Upgrades: Whether you’re looking to improve your vehicle’s handling for street driving or track use, these sway bar bushings offer enhanced performance, greater sway bar effectiveness, and increased durability, making them an essential upgrade for enthusiasts. In conclusion, the Powerflex 26.5mm Front Sway Bar Mounting Bushings for the BMW E9X 3 Series and X1 xDrive are an ideal solution for those seeking improved handling, greater durability, and a more connected driving experience. These bushings deliver performance upgrades while maintaining comfort for everyday driving.

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:23847546

Part#: E9XCUPKITKT

Ships in 1 day

$ 522.79 USD

Add to Wish List

Qty

$ 522.79 USD

Add to Wish List

Enhance your BMW's performance upgrades with this comprehensive installation kit designed for cup kits or coilovers. This kit provides all essential components necessary to facilitate the installation process, ensuring a hassle-free setup for your vehicle modification.

Key Benefits:

Ideal for installing cup kits or coilovers on your BMW
Comprehensive kit includes all necessary installation components
Facilitates a hassle-free setup for vehicle modifications

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:28104822

Part#: 37142283867TKT

Ships on Feb 8, 2027

Sale - Save 1% $ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD

Add to Wish List

Qty

Sale - Save 1%

$ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD

Add to Wish List

Featuring quality aftermarket M3 control arms plus Performance Rear Trailing arms Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy. Not sure about ECS Tuning's Upgraded Trailing arm? Let us explain... Factory steel rear trailing arms flex, causing undesired suspension geometry changes under load. BMW engineered a failure point into this stock arm - metal fatigue combined with shock forces from a pothole or curb, have been shown in some cases to cause the arm to buckle, turning a pleasant drive into a visit by roadside assistance. ECS Tuning's Performance Rear Trailing Arm Set is an upgrade that has been engineered to address these issues, while also being lighter and more attractive than the factory steel component. Elimination of a factory-designed failure point and an all-around stiffer design mean greater peace of mind as well as more confident handling with no unintended geometry changes. Combined with new M3/1M front and rear control arms for the ideal suspension set-up for your car. Kit Features: quality aftermarket M3/1M Front Control Arms quality aftermarket M3/1M Rear Control Arms ECS Upgraded Rear Trailing Arm BMW Headlight Leveling Sensor Rod BMW Rear ABS Bracket quality aftermarket Rear Guide Rods Trailing Arm features: Constructed from solid 6061-T6 aluminum Anodized for corrosion resistance Increased strength versus the factory steel arm - this arm fears no pot holes 25% lighter (384 grams versus 517 grams each)

Show More Show Less

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344778

Part#: ECSTMSPDBKT

In Stock

Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane

Show More Show Less

IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...

T#:2408491

Part#: IRPRSB-90PU

In Stock

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.

Show More Show Less

Front Right Control Arm & Ball Joint Service Kit - E9X E84 xDrive ...

10X Entries Into Our F80 M3 Sweepstakes

T#:30463964

Part#: 31126768984KT3

In Stock

$ 362.99

This product was last offered at the strikethrough price on
05-04-2026

$ 334.99 USD

Add to Wish List

Qty

$ 334.99 USD

Add to Wish List

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Kit Includes:

2 Front Control Arms 2 Ball Joints Installation Hardware Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Show More Show Less

Powerflex Silicone Grease

T#:362715

Part#: PCG1

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.

Show More Show Less

Rear Upper And Lower Shock Mount Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677517

Part#: 33526764406-KT

Ships in 1 day

$ 152.99

This product was last offered at the strikethrough price on
08-28-2026

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts

Show More Show Less

M3/1M Front and rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644253

Part#: 37142283867KT

Ships on Feb 8, 2027

$ 1,425.99 USD

Add to Wish List

Qty

$ 1,425.99 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644325

Part#: 33306760349-KT

Ships in 1 day

Sale - Save 1% $ 364.99

This product was last offered at the strikethrough price on
08-28-2026

$ 362.02 USD

Add to Wish List

Qty

Sale - Save 1%

$ 364.99

This product was last offered at the strikethrough price on
08-28-2026

$ 362.02 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job. See kit contents tab for a list of included components.

Show More Show Less

Complete Performance Polyurethane Differential And Subframe Bushing S...

10X Entries Into Our F80 M3 Sweepstakes

T#:56038061

Part#: E9XSBFRDFFBKT2

In Stock

$ 491.99 USD

Add to Wish List

Qty

$ 491.99 USD

Add to Wish List

This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:23152016

Part#: 371422838671KT

Ships in 4 Business Days

$ 1,330.65 USD

Add to Wish List

Qty

$ 1,330.65 USD

Add to Wish List

Featuring quality M3 control arms plus Performance Rear Trailing arms

M3/1M Rear Upper Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41897482

Part#: 33322283547TKT

Ships in 8 Business Days

$ 498.99

This product was last offered at the strikethrough price on
10-01-2026

$ 483.99 USD

Add to Wish List

Qty

$ 483.99 USD

Add to Wish List

Upgrade your BMW’s rear suspension with confidence. Unlock sharper handling, better rear traction, and race-bred geometry—without sacrificing daily comfort or reliability.

IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)

T#:2408474

Part#: IRPRSB-90AL

Special Order: No Guaranteed ETA

$ 319.99 USD

Add to Wish List

Qty

$ 319.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less