Home
Intake
Intake Manifold Upgrades & Components (DISA, Vacuum, CCV

BMW Intake Manifold Components (DISA, Vacuum, CCV, Etc) for BMW 3 Series E91 (2006-2012)

Clear BMW chassis

The intake manifold takes incoming air from the intake and distributes it to each cylinder. Over the years the manifolds have gotten more sophisticated and complex. Most of the additional work that it does is emissions-related - recirculating vapors back into the engine to be re-used. But there are also performance innovations such as BMW's DISA variable intake runners. All of the modern innovations have a part behind it and here you will find replacement components.

In some BMW models there are performance improvements with intake manifolds. These intake manifold upgrades use mostly BMW parts and are a direct replacement for your stock manifold. We offer manifolds and kits to make the conversion work easier.

Sub-Categories

Sort By:

Genuine BMW Intake Manifold Profile Gasket Set (Set of 6) - E90 E92 E...

T#:14621

Part#: 11617547242

In Stock

Sale - Save 5% $ 42.89

$ 40.75 USD

Add to Wish List

Qty

Sale - Save 5% $ 42.89

$ 40.75 USD

Add to Wish List

This set of 6 gaskets is to seal the intake manifold to the cylinder head. These are absolutely crucial to prevent vacuum and intake air leaks and lean running conditions. These are also usually replaced when adding the 330 manifold to a 325, 328. Price is for a set of 6 - one for each intake runner. On cars with V8 engines 2 sets are required.

Show More Show Less

Genuine BMW Crank Case Fasteners - N54 3.0L, N52 3.0L, N55 3.0L ...

T#:30544

Part#: 11110392552

In Stock

Sale - Save 4% $ 31.99

$ 30.56 USD

Add to Wish List

Qty

Sale - Save 4% $ 31.99

$ 30.56 USD

Add to Wish List

Genuine BMW Set Of Alu. Screws Crank Case
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Oil Separator Vent Hose

For vehicles with production date from 10/2005

T#:348665

Part#: 11617559530OE

In Stock

10% off MSRP $ 67.99

$ 60.99 USD

Limited Qty Sale

Add to Wish List

Qty

10% off MSRP $ 67.99

$ 60.99 USD

Limited Qty Sale

Add to Wish List

Adjusting Unit For Intake Manifold (disa Valve) - E9x E82 E60 X3 X5 ...

T#:19291

Part#: 11617579114

Ships in 1 day

Sale - Save 3% $ 415.99

$ 403.49 USD

Add to Wish List

Qty

Sale - Save 3% $ 415.99

$ 403.49 USD

Add to Wish List

The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits cars with N52 or N51 engine - not N52N models. This is the larger of the 2 DISA Valves on this motor. The other DISA valve is part number 11617560538

This item fits the following BMWs:
2008+ E82 BMW 128i - N51 engine
2006-2011 E90 BMW 328i 328xi 328i xDrive (N51) - 330i 330xi - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive (N51)- Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive (N51)- Coupe
2007-2013 E93 BMW 328i (N51) - Convertible
2004-2010 E60 BMW 530i (N52) 530xi
2011+ F10 BMW 528i
2007-2010 E83 BMW 3.0si
2011 F25 BMW X3 xDrive28i
2007-2013 E70 BMW X5 3.0si
2003-2008 E85 BMW Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Upper DISA Valve for Intake Manifold - E9x E82 E60 X3 X5

T#:19200

Part#: 11617560538

Ships in 1 day

Sale - Save 5% $ 415.99

$ 395.17 USD

Add to Wish List

Qty

Sale - Save 5% $ 415.99

$ 395.17 USD

Add to Wish List

The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits cars with N52 or N51 engine - not N52N models. This is the smalller of the 2 DISA Valves on this motor it is considered the "Upper Disa valve". The lower DISA valve is part number 11617579114

This item fits the following BMWs:
2008-2013 E82 BMW 128i (N51 Engine Only)
2006 E90 BMW 330i 330xi - Sedan
2006-2011 E90 BMW 328i 328xi 328i xDrive (N51 Engine Only) - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive (N51 Engine Only) - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive (N51 Engine Only) - Coupe
2007-2013 E93 BMW 328i (N51 Engine Only) - Convertible
2006-2010 E60 BMW 530i 530xi
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0si
2011-2012 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Intake Manifold Upgrade Kit - E82/88 128, E9X 328, E60 528 N52 3.0L ...

T#:376157

Part#: 11617559523KT2

Ships in 1 day

Sale - Save 3% $ 2,014.99

$ 1,954.34 USD

Add to Wish List

Qty

Sale - Save 3% $ 2,014.99

$ 1,954.34 USD

Add to Wish List

Upgrade your BMW N52-powered vehicle with the high-performance E90 330i 3-stage intake manifold. Compared to other N52-powered models, the 330i boasts the highest horsepower due to its 3-stage manifold design. This manifold features two DISA valves that optimize air diversion to the cylinders, maximizing power extraction from the engine.

Key benefits of the 3-stage manifold include:

Efficient air distribution to cylinders for enhanced power output.
Improved fuel adjustments by the ECU for optimal performance.
Bolts onto any N52 version and, with an ECU flash, can add up to 42hp.

The kit includes:

330i intake manifold
Both DISA valves
Gaskets

For additional power gains, consider purchasing the N52 Euro Air box (ES#2072577) alongside this manifold. Please note that an ECU reflash is necessary for proper functionality of the intake.

Enhance your N52 engine's performance and power output with this comprehensive E90 330i 3-stage intake manifold kit.

Show More Show Less

Crankcase Oil Separator - E90 325i/330i, E60 525i/530i, E85 Z4 3.0i/3...

T#:13027

Part#: 11617531423

Ships in 1 day

Sale - Save 3% $ 124.99

$ 121.24 USD

Add to Wish List

Qty

Sale - Save 3% $ 124.99

$ 121.24 USD

Add to Wish List

The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or solid oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create a oil sludge condition that is impossible to clear. Thankfully, the CCV is replaceable on the early N52 engines (2006) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2006-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si

Show More Show Less

Genuine BMW Crankcase Ventilation Hose

T#:32283

Part#: 11157567802

Ships in 1 day

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Genuine BMW Return Pipe -
This item fits the following BMW Chassis:
E90

Fits BMW Engines including:
N52

Crankcase Oil Separator and Vent Hose Kit - E90 325xi/330xi, E60 525x...

10X Entries For Our Spin To Win Sweepstakes!

T#:221961

Part#: TMS221961

Ships in 1 day

$ 393.99 USD

Add to Wish List

Qty

$ 393.99 USD

Add to Wish List

The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:

11617531423, Genuine BMW oil separator

11617559530, vent hose

11157522931, oil separator hose

11157567802, return hose

11157537701, extraction hose

11617547242, intake manifold gaskets (set of 6)
The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This kit fits the following BMWs:
10/2005+ E90 BMW 325xi 330xi - Sedan
10/2005+ E91 BMW 325xi - Wagon
10/2005+ E60 BMW 525xi 530xi

Show More Show Less

Genuine BMW Vacuum Pump Sprocket - N52 3.0L, N55 3.0L, N54 3.0L ...

T#:34987

Part#: 11417516128

Ships Jul 1, 2025

3% off MSRP $ 32.99

$ 31.99 USD

Add to Wish List

Qty

3% off MSRP $ 32.99

$ 31.99 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Intake Manifold - E60 E82 E88 E90 E91 E92 E93 Z4 ...

For vehicles with production date up to 09/2005, also use: (Qty.) (1) 11 61 7 559 530 c...

T#:36540

Part#: 11617559524

Ships Jul 1, 2025

Sale - Save 3% $ 1,083.99

$ 1,051.18 USD

Add to Wish List

Qty

Sale - Save 3% $ 1,083.99

$ 1,051.18 USD

Add to Wish List

Genuine BMW Intake Manifold -
This item fits the following BMW Chassis:
E82,E83 X3,E85,E90,E92,E93

Fits BMW Engines including:
N52,N52N

Genuine BMW Hex Nut With Plate - 07129905541

T#:28904

Part#: 07129905541

In Stock

Sale - Save 34% $ 1.99

$ 1.32 USD

Add to Wish List

Qty

Sale - Save 34% $ 1.99

$ 1.32 USD

Add to Wish List

Genuine BMW Hex Nut With Plate
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E30,E34,E36,E38,E39,E46,E53 X5 X5,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Show More Show Less

Genuine BMW Screw - 11617535850

T#:36510

Part#: 11617535850

In Stock

Sale - Save 5% $ 14.78

$ 14.04 USD

Add to Wish List

Qty

Sale - Save 5% $ 14.78

$ 14.04 USD

Add to Wish List

Genuine BMW SCREW

Genuine BMW Emissions Service Kit

T#:376819

Part#: 11617561408KT2

Ships Jul 1, 2025

Sale - Save 3% $ 163.99

$ 158.86 USD

Add to Wish List

Qty

Sale - Save 3% $ 163.99

$ 158.86 USD

Add to Wish List

Vacuum Pump

T#:407899

Part#: 11667558344

Ships Jul 7, 2025

Sale - Save 3% $ 643.99

$ 624.43 USD

Add to Wish List

Qty

Sale - Save 3% $ 643.99

$ 624.43 USD

Add to Wish List

Select Vehicle

Purpose

Category

Home
Intake

Intake Manifold Upgrades & Components (DISA, Vacuum, CCV

Brand

Price

Special Offers

On Sale (11)

Shipping