BMW Internal Engine Parts for BMW 7 Series F02 (2009+)

WPC-Treated Race Series Rod Bearings - Complete Set - BMW N52 N54 N55...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:34147756

Part#: N5X-WPC-RB

In Stock

Sale - Save 15% $ 519.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 519.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.99 USD

Add to Wish List

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or rod bearing service!

Show More Show Less

WPC-Treated Race Series Rod Bearings - Complete Set - BMW N63 S63 ...

For Vehicles with a Production Date from 03/2011

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:34147761

Part#: N63-WPC-RB

In Stock

Sale - Save 15% $ 667.99

This product was last offered at the strikethrough price on
06-14-2026

$ 567.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 667.99

This product was last offered at the strikethrough price on
06-14-2026

$ 567.79 USD

Add to Wish List

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or rod bearing service!

Show More Show Less

WPC-Treated Race Series Main Bearings - Complete Set - BMW N52 N54 N5...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:34147790

Part#: N5X-WPC-MB

In Stock

Sale - Save 10% $ 607.99

This product was last offered at the strikethrough price on
10-28-2026

$ 547.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 607.99

This product was last offered at the strikethrough price on
10-28-2026

$ 547.19 USD

Add to Wish List

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or main bearing service!

Show More Show Less

WPC-Treated Connecting Rod Bearings - Complete Set - BMW N63/S63 4.4L...

For vehicles with a production date up to 03/2011

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
For vehicles with a production date up to 03/2011

T#:41863728

Part#: S63-WPC-RB

In Stock at Vendor

Sale - Save 10% $ 572.99

This product was last offered at the strikethrough price on
06-14-2026

$ 515.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 572.99

This product was last offered at the strikethrough price on
06-14-2026

$ 515.69 USD

Add to Wish List

What's better than using standard connecting rod bearings in your next engine build? Using our Turner Motorsport WPC-treated bearings! Our process begins with King Engine Bearings bearing shells. Designed with performance and load capacity in mind, King's SV Series bearings feature a Lead-free, tri-metal Silver-based overlay with a Babbitt plating made to provide seizure resistance. Ideal for extreme-load engines, it serves as an OE replacement and can be employed as a sputter replacement. Despite offering great wear and friction resistance, the engineers at Turner Motorsport saw an opportunity to further improve King's bearing design with WPC surface treatment. WPC reduces friction and adds strength, vastly enhancing the durability of critical internal engine components. Ultra-fine particles are fired at the surface at very high speeds—similar to shot-peening, but on a much smaller scale. The treated parts come out smoother and stronger due to thermal discharge. The two greatest enemies of any high-performance engine are heat and friction, and WPC technology effectively reduces both.

Show More Show Less

WPC Treated Cam Bearing Ledge - Intake

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:13299338

Part#: 11127550913WPC2

In Stock

$ 916.99 USD

Add to Wish List

Qty

$ 916.99 USD

Add to Wish List

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:18733532

Part#: VTT-CRANKHUB-6

In Stock

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Supertech Single Groove Exhaust Valve - Priced Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21472889

Part#: BMEVI-1055S-HS

Ships in 9 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Single Groove sodium filled exhaust valves for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

5mm Single Groove Valve Keeper - Set Of 24

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604314

Part#: KPR-5.0-7S-24

In Stock

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

Two required per valve, for use with certain supertech valves 5.0mm single groove

N54 Spline Lock Crank Hub Solution With Complete Package

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:18733525

Part#: VTT-CRANKHUB-3

In Stock

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:18733531

Part#: VTT-CRANKHUB-5

Ships on Nov 16, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Supertech Forged Pistons - Set Of 6

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604329

Part#: P6-BMN55-84-T-6

In Stock

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Supertech forged pistons are a great choice for performance engine builds! Bore: 84.00mm Over Size: STD Comp Ratio: 10.2:1 Dome dish: -10.4 Head CCs: 37cc Comp Height: 32.40mm Stroke: 89.60mm Skirt style: Slipper Design Rod Length: 141.35mm Pin Diam: 22mm Material: 4032 Application: All Motor / Turbo Ring part number: R84-GNH8400 (MUST BE PURCHASED SEPARATELY)

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:18733526

Part#: VTT-CRANKHUB-4

Ships on Nov 16, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - N54

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:558924

Part#: VTT-N54-CRANKHUB

Ships on Nov 16, 2026

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships on Nov 16, 2026

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:18733527

Part#: VTT-CRANKHUB-2

Ships on Nov 16, 2026

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Supertech Single Groove Intake Valve - Set Of 12

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:14783498

Part#: BMIVN-1055S-12

Ships in 6 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Supertech Titanium Valve Retainers - Intake - Set Of 12

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604322

Part#: RET-BMN54-TI-12

Ships in 9 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Supertech Titanium Valve Retainers - Exhaust - Set Of 12

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604321

Part#: RET-BMN54-TE-12

Ships in 9 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Performance Dual Valve Spring Kit with Steel Retainers - Set Of 24 ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604308

Part#: SPRKFE20N54BE

Ships in 5 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 75 @ 36.5 Open Pressure: 155 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 8 Kit spring: SPR-FE20BE Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Supertech Single Groove Exhaust Valve - Set Of 12

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:14816646

Part#: BMEVI-1055S-HS-1

In Stock

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Single Groove sodium filled exhaust valve set for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

Conical Spring Kit - Set Of 24

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604309

Part#: SPRKFE20N54BE2

Ships in 6 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Exhaust Valve - Sodium Filled - Oversize

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505757

Part#: BMEVI-1054S-HS-1

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Forged Connecting Rods - Sold Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604327

Part#: CR-BMN55-H144.35

Special Order: No Guaranteed ETA

$ 198.99 USD

Add to Wish List

Qty

$ 198.99 USD

Add to Wish List

Supertech forged rods are a great choice for performance engine builds! These rods come with ARP 2000 hardware and are designed for high powered N55/S55 applications. H-Beam design Forged 4340 alloy Center to center: 144.35mm Be bore: 53.6mm Be width: 20.88 Pe bore: 22mm full float Pe width: 20.88mm tapered ARP 2000 - 3/8" x 1.600" bolts

Show More Show Less

Performance Conical Valve Spring - Sold Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21472894

Part#: SPR-FE20BE

In Stock

$ 19.99

This product was last offered at the strikethrough price on
10-25-2026

$ 18.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 19.99

This product was last offered at the strikethrough price on
10-25-2026

$ 18.99 USD

Limited Qty Sale

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

Exhaust Valve - Sodium Filled - Std Size

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505756

Part#: BMEVI-1054S-HS

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Intake Valve - Black Nitride - Oversize

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505753

Part#: BMIVN-1054S-1

Ships in 9 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Intake Valve - Black Nitride

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505752

Part#: BMIVN-1054S

In Stock

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Exhaust Valve Set - Sodium Filled - Oversize

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505765

Part#: BMEVI1054SHS-1KT

In Stock

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Intake Valve Set - Black Nitride - Std Size

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505754

Part#: BMIVN-1054SKT

Ships in 6 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Performance Conical Valve Spring - Set Of 24

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604324

Part#: SPR-FE20BE-24

Ships in 9 Business Days

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

Performance Conical Valve Spring - Sold Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604306

Part#: SPR-FE20BE-2

Ships in 9 Business Days

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

Intake Valve Set - Black Nitride - Oversize

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505755

Part#: BMIVN-1054S-1KT

Ships in 9 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Performance Conical Valve Spring - Set Of 24

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604325

Part#: SPR-FE20BE-2-24

Ships in 9 Business Days

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

Supertech Titanium Valve Retainers - Exhaust - Sold Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604320

Part#: RET-BMN54-TE

Ships in 9 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Supertech Titanium Valve Retainers - Intake - Sold Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604319

Part#: RET-BMN54-TI

Ships in 9 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Supertech Single Groove Intake Valve - Priced Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:14783497

Part#: BMIVN-1055S

Ships in 9 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

SuperTech High Performance Valve Spring Kit - 88lbs - BMW N55 S55 ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:14783500

Part#: SUP-HPVSK-S55-88

Ships on Nov 17, 2026

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

Exhaust Valve Set - Sodium Filled - Std Size

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21505767

Part#: BMEVI-1054S-HSKT

Ships in 9 Business Days

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

N54 Schrick Camshaft Set 268/265

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:25739348

Part#: N54CAMSKT

Ships on Feb 19, 2027

$ 3,415.99 USD

Add to Wish List

Qty

$ 3,415.99 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

5mm Single Groove Valve Keeper - Priced Each

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21604312

Part#: KPR-5.0-7S

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Two required per valve, necessary use with certain supertech valves 5.0mm single groove

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 7 Series F02 (2009+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results