BMW Suspension Parts for BMW 7 Series F02 (2009+)

Factory Pre-set Damping 

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

• Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
• Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
• Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
• TUV approved lowering range and operation,
• Expert engineering and design for ease-of-use and long durability,

This is the ideal coil over kit for a F10 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2011+ F10 BMw 528i 535i 550i
2009+ F01 BMW 740i 740li 750i 750li 
Not for cars with Adaptive Drive.

Adjustable Rebound Damping 

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

• Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
• Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
• Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
• TUV approved lowering range and operation,
• Expert engineering and design for ease-of-use and long durability,

This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
This kit includes the KW EDC Cancellation Kit to disable the EDC adjustable shock system. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2011+ F10 BMw 528i 535i 550i with EDC
Not for cars with Adaptive Drive.

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Add negative camber to the front wheels of your BMW to increase the stock handling limitations and reduce the issues with outer tire wear during hard cornering. The increased camber adjustment allows for more responsive turn-ins and can slightly reduce the tire wear on the outer edge of the tire.

Benefits:

• Replaces front upper control arms with ones that increase negative camber up to -0.5 degrees
• Improves grip of front tires
• Evens out tire wear during aggressive cornering

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 1 point towards your Dinan badge.

Fits the Following BMW's:

2011+ F13 BMW 640i 640iX 650i 650iX 650iX 4.0 650iX 4.4
2012+ F12 BMW 640i 640iX 650i 650iX 650iX 4.0 650iX 4.4
2011 - 2016 F11 BMW 520i 523i 528i 528iX 530dX 530i 535i 535iX 550I
2010 - 2016 F10 BMW 520i 523i 528i 528iX 530i 535i 535iX 550i 550iX Hybrid 5 M5
2009 - 2016 F07 BMW 528i 535i 535iX 550i 550iX 550iX 4.0 550iX 4.4
2013+ F06 BMW 640i 640i xDrive 650i 650i xDrive ALPINA B6X
2010 - 2015 F04 BMW Active Hybrid 7 Active Hybrid 7L
2010 - 2015 F03 BMW 7 Series Sedan F01/F02 Protection versions 750LiS 760LiS
2011 - 2015 F02 BMW Long Wheelbase 740Ld xDrive 740i 740Li xDrive 750Li 750Li xDrive 760Li Active Hybrid 7
2008 - 2010 F02 BMW Long Wheelbase 740Li 750Li 750Li xDrive 760Li ALPINA B7L ALPINA B7LX
2011 - 2015 F01 BMW 740i 750i 750i xDrive
2008 - 2010 F01 BMW 740i 750i 750i xDrive ALPINA B7 ALPINA B7X

The Powerflex Rear Sway Bar Bushing for the BMW F10/F11, designed specifically for a 15mm sway bar, is an excellent performance upgrade that enhances the vehicle's handling and stability. By replacing the factory rubber bushings with high-quality polyurethane, this component delivers several key advantages.

Key Features:

1. Improved Cornering Stability: The firmer polyurethane construction significantly reduces flex in the sway bar, resulting in minimized body roll during cornering. This enhancement leads to improved traction and a more controlled driving experience, particularly during aggressive maneuvers.

2. Superior Durability: Engineered to withstand harsh driving conditions, these bushings resist wear and tear from oil, heat, and road debris. Unlike traditional rubber bushings that may degrade over time, Powerflex bushings maintain their performance and integrity longer.

3. Enhanced Driver Feedback: By limiting unwanted movement in the sway bar assembly, these bushings provide better steering feedback and responsiveness. Drivers will notice an increase in steering precision, resulting in a more engaging and connected driving experience.

4. Direct Fit for Simple Installation: Tailored specifically for the BMW F10/F11 models with a 15mm rear sway bar, these bushings offer a precise fit and allow for easy installation without the need for modifications or special tools.

This upgrade is ideal for BMW F10/F11 owners looking to elevate their vehicle's handling capabilities and overall driving performance. The Powerflex Rear Sway Bar Bushing is a reliable choice for enhancing the effectiveness of the rear suspension, making it suitable for both everyday driving and spirited performance applications.

Air Lift proudly introduces the revolutionary Air Lift Performance 3P pressure-based air suspension control system after three years of extensive development and testing. This system represents the pinnacle of their innovation.

Air Lift Performance 3P amalgamates pressure-based control with optional ride-height sensing technology, leveraging the advantages of both systems to instantly enhance suspension control, performance, and ride flexibility.

Key Specifications:

• Controller: Features a vibrant TFT color display with adjustable backlight, illuminated preset buttons, and full-color indicators for tank pressure, 4-corner active height, and pressure readings. It's encased in a black anodized CNC machined case, allowing customized mounting options with a Micro-USB port for power.
• Mobile App: Works seamlessly with the free mobile app, enabling Bluetooth-based ride height and system settings adjustments. Additionally, the app facilitates direct system software updates to the manifold and controller.

Kit Features:

• Pressure-based 1/4" Manifold
• Black Anodized Aluminum Display

Air Lift Viair 444C Dual Pack Compressor - 200 PSI - Chrome offers a significant upgrade for BMW air suspension systems, delivering superior performance and reliability. Engineered by Turner Motorsport, these compressors are designed to enhance efficiency and durability.

• Newly-Developed Intercooler Head: Improves compressor efficiency and performance.
• Stainless Steel Braided Leader Hoses: Includes inline check valve assembly for enhanced protection against high amperage restarts.
• Chrome Finish: Provides increased durability and a sleek, aesthetic appeal.
• Complete Kit: Includes air filter assemblies, remote mount brackets, fittings, spare air filter elements, nuts, bolts, washers, lock washers, and airline clips.
• Easy Installation: Compatible with various air suspension setups for a hassle-free upgrade.

Upgrade your BMW's air suspension system with the Air Lift Viair 444C Dual Pack Compressor for top-tier performance and durability.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2007 - 2011 E70 X5 3.0sd X5 3.0si x5 4.8i
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i X5 xDrive50i
2008 - 2014 E71 X6 xDrive35i X6 xDrive50i
2008-2014 E71 X6M