BMW Brakes & Brake Parts for BMW 7 Series F02 (2009+)

ECS Performance Caliper Guide Bushing Set - Most Models

10X Entries Into Our F80 M3 Sweepstakes

T#:362994

Part#: 003326ECS01

In Stock

Sale - Save 25% $ 169.99

This product was last offered at the strikethrough price on
06-13-2026

$ 127.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 169.99

This product was last offered at the strikethrough price on
06-13-2026

$ 127.49 USD

Add to Wish List

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions***

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers.

Show More Show Less

Brembo DOT 5.1 Brake Fluid - 1 Liter

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:396547

Part#: L05010

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Synthetic DOT 4 brake fluid.
Boiling Point - Dry: 500 Degrees Fahrenheit / Wet: 356 Degrees Fahrenheit.
Specially formulated to work with DOT 4 required braking systems.

Brembo Calipers F40, F50, B, H, GT1 - Street Brake Pad Set - Ferodo F...

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:387834

Part#: 107864516

In Stock

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

These are the standard Brembo street pads used for the Brembo F40/F50/B/H/GT1 4-piston caliper, made by Ferodo. These are an excellent street pad with many positive attributes for daily driving - low noise, excellent initial bite and modulation.

Show More Show Less

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - F01/02/06/...

10X Entries Into Our F80 M3 Sweepstakes

T#:552379

Part#: 002563ECS03

In Stock

Sale - Save 3% $ 164.99

This product was last offered at the strikethrough price on
06-14-2026

$ 160.04 USD

Add to Wish List

Qty

Sale - Save 3%

$ 164.99

This product was last offered at the strikethrough price on
06-14-2026

$ 160.04 USD

Add to Wish List

ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

Show More Show Less

Rear V5 Plain Brake Rotors - Set (345x24)

For vehicles with production date 2011+

10X Entries Into Our F80 M3 Sweepstakes

T#:17704939

Part#: 34206894381-P

Ships in 5 Business Days

Sale - Save 3% $ 255.99

This product was last offered at the strikethrough price on
06-14-2026

$ 248.30 USD

Add to Wish List

Qty

Sale - Save 3%

$ 255.99

This product was last offered at the strikethrough price on
06-14-2026

$ 248.30 USD

Add to Wish List

Precision manufactured and featuring a GeoSpec® corrosion-resistant coating ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 plain rotor design is perfect for daily drivers looking for a reliable and affordable brake rotor option and features a durable GeoSpec® silver-colored coating, which offers superior corrosion protection versus a painted or zinc coated rotor. This coating also eliminates the light oiling many manufactures utilize to avoid flash rust while rotors are stored or in transit: this means there's no cleaning or scuffing required to install ECS V5 plain rotors, making brake services quicker than that with uncoated rotors. Crafted from high-quality materials, ECS V5 brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

Front V5 Plain Brake Rotors - Set (348x36)

For vehicles with a production date from 09/2009

10X Entries Into Our F80 M3 Sweepstakes

T#:17704950

Part#: 34116898729-P

Ships in 5 Business Days

Sale - Save 3% $ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 310.38 USD

Add to Wish List

Qty

Sale - Save 3%

$ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 310.38 USD

Add to Wish List

Precision manufactured and featuring a GeoSpec® corrosion-resistant coating ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 plain rotor design is perfect for daily drivers looking for a reliable and affordable brake rotor option and features a durable GeoSpec® silver-colored coating, which offers superior corrosion protection versus a painted or zinc coated rotor. This coating also eliminates the light oiling many manufactures utilize to avoid flash rust while rotors are stored or in transit: this means there's no cleaning or scuffing required to install ECS V5 plain rotors, making brake services quicker than that with uncoated rotors. Crafted from high-quality materials, ECS V5 brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

IRP Universal Hydraulic Handbrake

T#:584206

Part#: IRPHBK1

Ships on Jan 11, 2027

Starting at $ 246.99 USD

Add to Wish List

Starting at $ 246.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

BMW Rear Drilled & Slotted Brake Rotors V5 - Set (345x24)

For vehicles with production date 2011+

10X Entries Into Our F80 M3 Sweepstakes

T#:17704934

Part#: 34206894381-XS

Ships in 5 Business Days

Sale - Save 3% $ 411.99

This product was last offered at the strikethrough price on
06-14-2026

$ 399.62 USD

Add to Wish List

Qty

Sale - Save 3%

$ 411.99

This product was last offered at the strikethrough price on
06-14-2026

$ 399.62 USD

Add to Wish List

BMW Rear Drilled & Slotted Brake Rotors V5 - Set (345x24) are precision manufactured to ensure consistent stopping power during high-performance driving. Designed by Turner Motorsport, these 5th generation rotors are crafted for BMW vehicles, featuring advanced technology for enhanced braking performance. With a sleek matte black zinc coating, they offer superior corrosion protection.

The V5 rotors incorporate a cross-drilled and slotted design, providing superior heat dissipation and improved wet-weather performance compared to traditional slotted rotors. This makes them ideal for high-performance driving enthusiasts. The black zinc coating not only adds a modern look but also delivers enhanced protection against corrosion.

Enhanced Heat Dissipation: The cross-drilled and slotted design improves cooling and overall braking performance.
Improved Wet-Weather Performance: Superior braking response in wet conditions ensures safety and control.
Matte Black Zinc Coating: Offers a contemporary appearance and excellent corrosion resistance.
High-Quality Materials: Constructed from premium materials to handle high-performance demands.
Precision Machining: Ensures optimal rotor balance, reduces vibration, and provides a smooth braking experience.

Show More Show Less

355x32 Brembo Brake Kit Slotted Rotors (Pair - Left and Right) ...

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:16465

Part#: BREMBO-355-32-SL

Ships in 3 Business Days

$ 1,210.00 USD

Add to Wish List

Qty

$ 1,210.00 USD

Add to Wish List

Brembo replacement friction rings (no hat), only for a Brembo Brake Kit.

Rear V5 Slotted Brake Rotors - Set (345x24)

For vehicles with production date 2011+

10X Entries Into Our F80 M3 Sweepstakes

T#:17704937

Part#: 34206894381-S

Ships in 5 Business Days

Sale - Save 3% $ 421.99

This product was last offered at the strikethrough price on
06-14-2026

$ 409.32 USD

Add to Wish List

Qty

Sale - Save 3%

$ 421.99

This product was last offered at the strikethrough price on
06-14-2026

$ 409.32 USD

Add to Wish List

Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 slotted rotor design provides excellent heat dissipation thanks to reduced pad out-gassing, meaning reduced brake fade. Slotting also reduces glazing, meaning consistently increased overall stopping power. The 5th generation slotted brake rotors also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today! Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 slotted rotor design provides excellent heat dissipation thanks to reduced pad out-gassing, meaning reduced brake fade. Slotting also reduces glazing, meaning consistently increased overall stopping power. The 5th generation slotted brake rotors also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

Brembo Premium NAO Ceramic Rear Brake Pad Set

For Vehicles with production date 2011+

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6076563

Part#: 34216790966

Special Order: No Guaranteed ETA

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Brembo and quality go hand in hand, and we are sure that your replacement pads will perform just like stock. These Brembo replacement pads offer a terrific combination of performance, comfort, reliability, and longevity. NAO Ceramic pads are designed to provide even more comfort while reducing pad wear. Ceramic material provides better braking performance, minimized noise, and a noticeable reduction in brake dust. OE equivalent friction formulations are specifically engineered to enhance braking power, minimize braking distances and provide quiet, safe braking in all road conditions. NAO Pads take this a step further to increase comfort and pad life. Brembo pads are thermal scorched to minimize break in period and reduce fading. Direct molding pressing guarantees maximum product accuracy Underlayer provides noise dampening and reduces heat transfer to the caliper. A reduction is vibration while braking is also achieved with NAO pads. Brembo multi-layer ESE shim ( Elastomer-Steel-Elastomer ) minimizes vibrations and noise. Brembo pads and shoes are homologated in compliance with ECE-R90 legislation and are marked accordingly for easy identification. We highly recommend you replace the brake sensor wire with the pads to ensure proper operation of your brake pad thickness warning light system.

Show More Show Less

Brembo Dot 4 Brake Fluid - 1 Liter

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:396531

Part#: L04010

In Stock

24% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 12.99 USD

Add to Wish List

Qty

24% off MSRP

$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 12.99 USD

Add to Wish List

Synthetic DOT 4 brake fluid.
Boiling Point - Dry: 500 Degrees Fahrenheit / Wet: 329 Degrees Fahrenheit.
Brembo Premium brake fluid has a higher boiling point that exceeds the standard, thus offering superior resistance to vapour lock and ensuring braking efficiency even at low temperatures.

Show More Show Less

Rear V5 Drilled & Slotted Brake Rotors - Set (370x24)

10X Entries Into Our F80 M3 Sweepstakes

T#:17704796

Part#: 34216775291-XS

Ships in 5 Business Days

Sale - Save 3% $ 469.99

This product was last offered at the strikethrough price on
06-14-2026

$ 455.88 USD

Add to Wish List

Qty

Sale - Save 3%

$ 469.99

This product was last offered at the strikethrough price on
06-14-2026

$ 455.88 USD

Add to Wish List

Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 cross drilled and slotted rotor design offers even greater heat dissipation and improved wet-weather performance as compared with a slotted rotor, making it an ideal choice for high-performance driving enthusiasts. The 5th generation slotted brake rotor also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

Rear V5 Slotted Brake Rotors - Set (370x24)

10X Entries Into Our F80 M3 Sweepstakes

T#:17704799

Part#: 34216775291-S

Ships in 5 Business Days

Sale - Save 3% $ 477.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.64 USD

Add to Wish List

Qty

Sale - Save 3%

$ 477.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.64 USD

Add to Wish List

Precision manufactured for consistent stopping power during high performance driving. Featuring a matte black zinc coating for corrosion protection. ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 slotted rotor design provides excellent heat dissipation thanks to reduced pad out-gassing, meaning reduced brake fade. Slotting also reduces glazing, meaning consistently increased overall stopping power. The 5th generation slotted brake rotors also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide coated rotor. Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

Rear V5 Plain Brake Rotors - Set (370x24)

10X Entries Into Our F80 M3 Sweepstakes

T#:17704801

Part#: 34216775291-P

Ships in 5 Business Days

Sale - Save 3% $ 253.99

This product was last offered at the strikethrough price on
06-14-2026

$ 246.36 USD

Add to Wish List

Qty

Sale - Save 3%

$ 253.99

This product was last offered at the strikethrough price on
06-14-2026

$ 246.36 USD

Add to Wish List

Precision manufactured and featuring a GeoSpec® corrosion-resistant coating ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors. The V5 plain rotor design is perfect for daily drivers looking for a reliable and affordable brake rotor option and features a durable GeoSpec® silver-colored coating, which offers superior corrosion protection versus a painted or zinc coated rotor. This coating also eliminates the light oiling many manufactures utilize to avoid flash rust while rotors are stored or in transit: this means there's no cleaning or scuffing required to install ECS V5 plain rotors, making brake services quicker than that with uncoated rotors. Crafted from high-quality materials, ECS V5 brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience. Whether you're a weekend warrior or a daily driver, ECS 5th generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Show More Show Less

Brembo Rear Brake Pad Set - F07/F01/F02

For vehicles with production date 2011+

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6046768

Part#: 34216793025

Special Order: No Guaranteed ETA

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

Brembo and quality go hand in hand, and we are sure that your replacement pads will perform just like stock. These Brembo replacement pads offer a terrific combination of performance, comfort, reliability, and longevity. Ceramic material provides better braking performance, minimized noise, and a noticeable reduction in brake dust. OE equivalent friction formulations are specifically engineered to enhance braking power, minimize braking distances and provide quiet, safe braking in all road conditions. Brembo pads are thermal scorched to minimize break in period and reduce fading. Direct molding pressing guarantees maximum product accuracy Underlayer provides noise dampening and reduces heat transfer to the caliper. Brembo multi-layer ESE shim ( Elastomer-Steel-Elastomer ) minimizes vibrations and noise. Brembo pads and shoes are homologated in compliance with ECE-R90 legislation and are marked accordingly for easy identification. We highly recommend you replace the brake sensor wire with the pads to ensure proper operation of your brake pad thickness warning light system.

Show More Show Less

Brake Pad Wear Sensor - Rear

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6046765

Part#: 34356791960

Special Order: No Guaranteed ETA

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Brembo Brake Pad Wear Sensor - Front

For Vehicles with production date 2009 only!

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6076575

Part#: 34356775850

Special Order: No Guaranteed ETA

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Wear sensors should be replaced with each pad replacement service per BMW. This authentic Brembo replacement front brake pad wear sensor is perfect for when you need to do your brake service! Ranging from street vehicles to full on race cars, Brembo is a world renown supplier for all types of applications.

Show More Show Less

Brake Pad Wear Sensor - Rear

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6076542

Part#: 34356775858

Special Order: No Guaranteed ETA

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Brembo replacement brake pad wear sensor. Brake pad wear sensor replacement is always recommended when the pads are serviced.

Brake Pad Set - Front

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6091454

Part#: 34116794464

Special Order: No Guaranteed ETA

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

These Brembo replacement pads offer a terrific combination of performance, comfort, reliability, and longevity. OE equivalent friction formulations are specifically engineered to enhance braking power, minimize braking distances and provide quiet, safe braking in all road conditions. NAO Pads take this a step further to increase comfort and pad life. Brembo pads are thermal scorched to minimize break in period and reduce fading. Direct molding pressing guarantees maximum product accuracy Underlayer provides noise dampening and reduces heat transfer to the caliper. Brembo multi-layer ESE shim ( Elastomer-Steel-Elastomer ) minimizes vibrations and noise. Brembo pads and shoes are homologated in compliance with ECE-R90 legislation and are marked accordingly for easy identification. We highly recommend you replace the brake sensor wire with the pads to ensure proper operation of your brake pad thickness warning light system.

Show More Show Less

Brembo Calipers Lotus, A, C, F - Street Brake Pad Set - Brembo Kevlar...

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6731762

Part#: AP1166.15R4S

Ships in 3 Business Days

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

BMW Brembo Type 3 Slotted Rotor Re-Ring Kit - 355x32mm

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:637156

Part#: 906570-906571KT

Ships in 3 Business Days

$ 1,381.99 USD

Add to Wish List

Qty

$ 1,381.99 USD

Add to Wish List

BMW Brembo Type 3 Slotted Rotor Re-Ring Kit - 355x32mm is an essential upgrade for maintaining the peak performance of your Brembo brake system. This re-ring kit, available through Turner Motorsport, includes new rotor rings and rotor hat hardware kits specifically designed for Type 3 slotted 355x32mm Brembo brake kits, ensuring that your braking system remains efficient and responsive.

The BMW Brembo Type 3 Slotted Rotor Re-Ring Kit is engineered to provide optimal braking performance by enhancing heat dissipation and reducing brake fade. The Type 3 slotted design offers superior bite and consistent braking, even under the most demanding conditions, making it perfect for both track enthusiasts and spirited street drivers. By replacing the rotor rings with this high-quality kit, you maintain the integrity of your brake system without the need to purchase an entirely new rotor assembly.

This kit is designed to be a direct fit for Brembo brake kits, making installation straightforward and hassle-free. With Turner Motorsport’s commitment to quality, you can trust that this re-ring kit will provide reliable performance and longevity.

Optimal braking performance: Enhances heat dissipation and reduces brake fade for consistent stopping power.
High-quality replacement: Includes new rotor rings and rotor hat hardware for Brembo Type 3 slotted 355x32mm brake kits.
Direct fit: Designed for easy installation with no modifications required.
Cost-effective maintenance: Replaces worn rotor rings, preserving your brake system’s efficiency without needing a full rotor replacement.
Track-ready performance: Superior bite and consistent braking under demanding conditions.