BMW Engine Parts for BMW 7 Series F02 (2009+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

VTT S55 Crank Bolt Capture - F8X S55 F3x N55
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:557934
Part#: VTT-S55-CBC
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.
Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.
BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

VTT N54 Crank Bolt Capture - N54
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:557938
Part#: VTT-N54-CBC
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice. 

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

  • 1x Aluminum Crank Bolt Capture
  • 8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54 

Show More Show Less

Valve Spring Removal & Installation Kit
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:589348
Part#: 029610SCH01A
In Stock
Sale - Save 15% $ 94.99

This product was last offered at the strikethrough price on
05-03-2026

$ 80.74 USD
Free Shipping
Sale - Save 15%
$ 94.99

This product was last offered at the strikethrough price on
05-03-2026

$ 80.74 USD
Free Shipping

Elevate your BMW maintenance with this comprehensive tool kit designed for valve and valve stem seal removal and replacement, all without the need to remove the head. This time-saving kit ensures efficiency and ease in the process, making it an essential for DIY enthusiasts and professionals alike. The universal fitment and a range of adapters guarantee versatility across various brands and motors, providing maximum utility.

  • Removes and replaces valves and valve stem seals without head removal
  • Time and effort-saving solution
  • Wide range of adapters for versatile use
  • Universal fitment for compatibility with different brands and motors
  • Essential for DIY and professional use

Contents:

  • 1 - Lever Bar
  • 4 - Valve Spring Compressor Adapters
  • 1 - Slotted/Notched Pulling Device
  • 1 - Hook Pulling Device
  • 1 - Connector for Valve Spring Adapters
  • 1 – Connector for Pulling Device
  • 1 - Extension for Valve Spring Adapters
Show More Show Less
Compression Tester European Adapter Kit
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:641925
Part#: 06254SCH01A
In Stock
Sale - Save 25% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.99 USD
Free Shipping on orders $49 and up
Built with 3 size hoses with 14mm end, 12mm end and 10mm end

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:638889
Part#: VTT-CRANKGUARD
In Stock
Starting at $ 89.99 USD
Free Shipping
Starting at $ 89.99 USD
Free Shipping
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less
Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
Ships in 10 Business Days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

Schwaben 7/8"(22mm) Flexible Oxygen Sensor Wrench
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:368923
Part#: FO-78
Ships on Dec 1, 2026
Sale - Save 25% $ 48.99

This product was last offered at the strikethrough price on
05-02-2026

$ 36.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 48.99

This product was last offered at the strikethrough price on
05-02-2026

$ 36.74 USD
Free Shipping on orders $49 and up
The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

3/8" Drive 45-Tooth Digital Torque Wrench
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:396470
Part#: 023382SCH01A
In Stock
Sale - Save 15% $ 159.99

This product was last offered at the strikethrough price on
05-03-2026

$ 135.99 USD
Free Shipping
Sale - Save 15%
$ 159.99

This product was last offered at the strikethrough price on
05-03-2026

$ 135.99 USD
Free Shipping
Discover precision tailored to BMW and MINI enthusiasts with the Schwaben 3/8" Drive Digital Torque Wrench – a fusion of precision, convenience, and lasting quality that defines your enthusiast spirit. Elevate your car maintenance with the convenience of digital precision, backed by our LIFETIME REPLACEMENT program that underscores our commitment to quality. Features: Precision Perfected: This torque wrench merges micro-adjustable excellence with a digital display of torque units, guaranteeing accuracy that aligns with professional standards. Easy to Read: This wrench's digital screen allows for a quick glance to suffice when checking your torque so you don't have to search for it! Versatile Control: The reversible 3/8" drive 45-tooth head, coupled with a push-button release, empowers you with effortless operation. Tailored Torque: With a range of 15-80 ft-lbs and 20-110 N-m, it's engineered to excel across various applications. Unit Variety: Read torque effortlessly in your preferred metrics: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg. Designed for Comfort: Its ergonomic 16" (370mm) length ensures comfortable handling, precision, and control. Unwavering Accuracy: With a remarkable accuracy within +- 3%, every task becomes a statement of confidence. On-the-Go Ready: Housed in a user-friendly blow-molded case, this torque wrench is primed for storage and mobility. Continuous Power: The included 3V CR2032 battery ensures seamless operation, offering you uninterrupted convenience.
Show More Show Less
Bav Auto Crankshaft Front Oil Seal Removal / Installer Tool - N54, N5...
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580444
Part#: B8800139
In Stock
Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Sale - Save 5%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.
Schwaben BMW Belt Tensioner Tool - N54/N55
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:387204
Part#: 020023SCH01A
In Stock
Sale - Save 25% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD
Free Shipping on orders $49 and up

Featuring a T60 Torx head, the belt tensioner found on the N54/N55 engine has exceptionally tight quarters. Use of this tool will allow access to the lock pin hole without excessive component removal, making belt removal and installation a much easier task.

This tool fits all N54/N55 powered BMW, including: 
2008+ E82 BMW 135i 1M Coupe 
2014+ F22 BMW M235i 
2006+ E90 BMW 335i 335xi 335i xDrive - Sedan 
2007+ E92 BMW 335i 335is 335xi 335i xDrive - Coupe 
2007+ E93 BMW 335i - Convertible 
2012+ F30 BMW 335i 335i xDrive - Sedan 
2013+ F32 BMW 435i 435i xDrive - Coupe 
2014+ F34 BMW 335i xDrive GT - Gran Tourismo 
2015+ F80 BMW M3 - Sedan 
2015+ F82 BMW M4 - Coupe 
2015+ F83 BMW M4 - Convertible 
2006-2010 E60 BMW 535i 535xi 535i xDrive 
2010+ F07 BMW 535i GT, 535i xDrive GT 
2011+ F10 BMW 535i 535i xDrive 
2012+ F13 BMW 640i 
2009+ F01 BMW 740i 740li 
2011+ F25 BMW X3 xDrive35i 
2007-2013 E70 BMW X5 xDrive35i 
2007-2014 E71 BMW X6 xDrive35i 
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is 

Show More Show Less


BMW M57 Diesel Crank Pulley Turning Tool
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:23913945
Part#: 003582SCH01A
In Stock
Sale - Save 25% $ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 49.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 49.49 USD
Free Shipping on orders $49 and up

BMW M57 Diesel Crank Pulley Turning Tool is essential for precise handling and adjustment of the crankshaft pulley in BMW diesel engines, including the N47, N57, and M57 models. This high-quality tool ensures accurate turning of the crankshaft pulley, facilitating easier maintenance and repairs.

  • Precision Engineering: Designed specifically for BMW M57 diesel engines for accurate pulley adjustment.
  • Compatibility: Fits various BMW diesel engines including N47, N57, and M57 models.
  • Durable Construction: Built to withstand the demands of automotive maintenance and repair.
  • Enhanced Efficiency: Simplifies crankshaft pulley turning, making engine service tasks more straightforward.

For a comprehensive tool kit, search for T#23913947.

Show More Show Less
Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
Ships on Feb 26, 2027
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.
Schwaben 9 Piece Scraper, Hook And Pick Set
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:379006
Part#: 008504SCH01A
In Stock
Sale - Save 15% $ 38.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.14 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 38.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.14 USD
Free Shipping on orders $49 and up
Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper.

Schwaben Automatic Battery Tender
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:378277
Part#: 005979SCH01A
In Stock
Sale - Save 25% $ 100.99

This product was last offered at the strikethrough price on
05-02-2026

$ 75.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 100.99

This product was last offered at the strikethrough price on
05-02-2026

$ 75.74 USD
Free Shipping on orders $49 and up
This Schwaben Battery Charger is designed to work on 6 or 12 volt Lead-acid batteries only, includes WET, MF,AGM and GEL types. Do not use on dry cell batteries commonly used in appliances. Charger features, Charging voltage auto select. Selectable Charging current,8 LED indicators, No risk of overcharging, overheating protection, Short circuit protection.
Show More Show Less

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580414
Part#: B8800107
In Stock
Sale - Save 3% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 360.99 USD
Free Shipping
Sale - Save 3%
$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 360.99 USD
Free Shipping
Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.
Show More Show Less
Schwaben Fuel Line Pliers
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:553938
Part#: P-648
In Stock
Sale - Save 25% $ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.74 USD
Free Shipping on orders $49 and up

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
Ships in 1 Business Day
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD
Free Shipping
$ 939.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Bav Auto Timing Tool Kit
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580365
Part#: B8800041
In Stock
Sale - Save 5% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD
Free Shipping
Sale - Save 5%
$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD
Free Shipping
Lock your camshafts in place when servicing your timing system to prevent future timing issues.

Bav Auto Torx head bolt socket - E12
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580351
Part#: B8800022
In Stock
Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
This special long, thin, Torx socket is required for removal and installation of the head bolts on most BMWs with twin-cam cylinder heads. 1/2" drive

Vargas Ignition Coil Kit (Red) - N5x
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:5309610
Part#: VTT-COIL-N5X-RED
Ships in 10 Business Days
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Schwaben BMW/MINI Fuel Injector O-Ring Tool Set N54 N63 N14 N18 ...
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:396865
Part#: 023883SCH01A
Ships on Nov 16, 2026
Sale - Save 25% $ 107.99

This product was last offered at the strikethrough price on
05-03-2026

$ 80.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 107.99

This product was last offered at the strikethrough price on
05-03-2026

$ 80.99 USD
Free Shipping on orders $49 and up

At almost half of the normal cost of Genuine BMW Installation Tool - No. 130190, this Schwaben BMW Fuel Injector O-Ring Tool Set is a perfect alternative to save money and ensure your have the proper tool for the job when it come time to service your fuel system. Make sure the job is done correctly the first time with this specialty item, relieving frustration and saving time all while preventing you from damaging critical seals or the injector itself that could otherwise be damaged if using the wrong tools for the job. 

This tool set includes all of the same components you would get with the BMW tool, the seal cutting pliers and seal installation components, made to exact specifications for perfect operation.

Show More Show Less
Piston Ring Filer
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:25805754
Part#: 3594SCH01A
In Stock
Sale - Save 40% $ 64.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.99 USD
Free Shipping on orders $49 and up
Sale - Save 40%
$ 64.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.99 USD
Free Shipping on orders $49 and up

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!


Key Features:

  • Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
  • Quick and Precise: File rings to exact specifications with ease.
  • Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
  • Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.


Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less


Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
In Stock
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.
BMW (N54/N63/S63) Injector Line Socket
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:3543423
Part#: LCB438SCH
In Stock
Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD
Free Shipping on orders $49 and up
Unique flare nut socket design allows for easy access without damaging expensive injectors

Bav Auto Fuel Injector Installer / Remover - N20/N55
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580389
Part#: B8800076
In Stock
Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Sale - Save 10%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.

Bav Auto Crankshaft Rear Oil Seal Removal / Installer Tool - N51, N52...
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.
Bav Auto Media Blaster Kit - BMW N20 N54 N55
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:582473
Part#: B1100008
In Stock
Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Sale - Save 8%
$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.
Show More Show Less

Borescope Camera with Light For Phone
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:32450134
Part#: PHONEBORESCOPE
In Stock
$ 59.16 USD
Free Shipping on orders $49 and up

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.


Key Features:

  • 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
  • Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
  • Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
  • Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
  • Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.


Includes:

  • Borescope Camera
  • Android Adapter
  • Lightning Port Adapter
  • USB Type-C Connector
  • 16.4 ft. Semi-Rigid Cable
  • Magnet
  • Hook
  • Mirror
  • Protective Cap
  • Manual


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bav Auto Oil Filter Housing Cap Removal Tool - 1/2" Drive
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.

Vargas Ignition Coil Kit (Blue) - N5x
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:5309605
Part#: VTT-COIL-N5X-BLU
Ships in 1-3 days
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Dielectric Tune-Up Grease 3oz Tube
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Permatex - Corporate Logo
T#:3672391
Part#: 22058
Ships in 1 Business Day
$ 20.99 USD
Free Shipping on orders $49 and up
Protects electrical connections and wiring from salt, dirt and corrosion
GENIUS 6 Volt / 12 Volt 5A Battery Charger - NOCO
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
NOCO - Corporate Logo
T#:641140
Part#: GENIUS5
In Stock
22% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD
Free Shipping
22% off MSRP
$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD
Free Shipping

The GENIUS5 is an exceptional addition to our lineup boasting incredible power, top-notch performance, energy efficiency, and a compact design. The GENIUS5 is a versatile 6-volt and 12-volt charger, maintainer, and desulfator with a 5-amp rating. It's engineered for use with lead-acid batteries in automotive, marine, and deep-cycle applications, covering flooded, gel, AGM, maintenance-free variants, and even lithium-ion batteries.


Features:

  • Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
  • Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
  • Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
  • Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
  • Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
  • Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bav Auto Intermediate Lever Valve Spring Compressor - N20/26 N55 ...
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Bav Auto Tools - Corporate Logo
T#:580431
Part#: B8800124
In Stock
Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
Sale - Save 15%
$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.


Schwaben 5pc Metric Flare Nut Wrench Set
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:380810
Part#: 010798SCH01A
In Stock
Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD
Free Shipping on orders $49 and up
This set is a must have for changing brake, fuel, oil lines of all kinds. Complete size coverage
1/2" Drive 45-Tooth Digital Torque Wrench
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:396471
Part#: 023380SCH01A
In Stock
Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD
Free Shipping
Sale - Save 10%
$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD
Free Shipping

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

  • Setting Range: 45-220 ft lbs (60-300 Nm)
  • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
  • Size: 22" (550mm) length for easy leverage
  • Accuracy: +- 3%
  • Include blow molded holding case
  • Requires one 3V CR2030 battery (included)
Show More Show Less
VTT N54 Vacuum Pump Block Off Plate
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:11497328
Part#: VTT-N54-VACUUM-B
Ships in 4 Business Days
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand
Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:11497326
Part#: VTT-N54-DI-DELET
Ships in 1 Business Day
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping
Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets​ Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp
Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:18733525
Part#: VTT-CRANKHUB-3
In Stock
$ 939.99 USD
Free Shipping
$ 939.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Schwaben 12 Ft 6 Gauge Booster Cables
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:378531
Part#: 007269SCH01
In Stock
Sale - Save 33% $ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 33%
$ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.

Billet Check Valve - 10 Barb
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:597641
Part#: VTT-CHECK-2
Ships in 2 Business Days
$ 36.99 USD
Free Shipping
$ 36.99 USD
Free Shipping
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
407 Piece O-Ring Assortment
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Performance Tool - Corporate Logo
T#:1809147
Part#: W5202
In Stock at Vendor
$ 21.99 USD
Free Shipping on orders $49 and up
Nitrile Butadiene Rubber

Universal Valve Spring Compressor
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Performance Tool - Corporate Logo
T#:1809130
Part#: W89409
Ships in 1 Business Day
$ 126.99 USD
Free Shipping
$ 126.99 USD
Free Shipping
For servicing overhead valve engine with cylinder head removed.

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Front Crankshaft Seal Installer - MINI
10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Schwaben - Corporate Logo
T#:21407048
Part#: 003413SCH01A
In Stock
Sale - Save 15% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 107.09 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 107.09 USD
Free Shipping on orders $49 and up

Discover the ultimate solution for your MINI Cooper's N12, N14, N16, and N18 engines in the R56 chassis – our MINI Cooper Front Crankshaft Seal Installer. This tool simplifies the installation process effortlessly. Just follow these easy steps: Tighten the three inner bolts to attach the inner piece onto the front crankshaft. Then, insert the seal into the outer portion of the tool. Place the outer portion over the now-attached stud and utilize the included pushing nut to apply uniform pressure, securely seating the seal onto the front crankshaft.

Crafted from robust materials, this tool is indispensable for both mechanics and DIY enthusiasts. Say farewell to laborious manual installations and welcome a quick, precise solution into your automotive toolkit. Upgrade your equipment today and make perfect seal installations a breeze.

This tool will also work on select BMW engines, please check fitment by entering your vehicle information!

Show More Show Less


BMW N54 3.0L Billet Vaccum Relief Valve
2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Vargas Turbo Technologies - Corporate Logo
T#:597525
Part#: VTT-VAC-RELIEF
Ships in 2 Business Days
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

BMW N54 3.0L Billet Vacuum Relief Valve from Vargas Turbo Technologies offers precise control over crankcase vacuum levels. This high-quality billet valve allows users to adjust the vacuum pressure with ease, eliminating guesswork and ensuring optimal engine performance. By simply adding or removing shims, users can tailor the vacuum level to their needs.

  • Customizable Vacuum Levels: Adjust the vacuum pressure using supplied shims to achieve desired performance.
  • Direct Fit: Designed with -10ORB threads for easy installation into VTT modular PCV solutions and VTT Modular CNC valve covers.
  • Versatile Settings: Includes 5 vacuum settings ranging from 10' to 18' of vacuum based on shim configuration.
  • Enhanced Engine Protection: Helps prevent excessive vacuum that could affect engine seals or cause whistling.
Show More Show Less
Boost Plus UltraSafe Lithium 1000A Jump Starter - NOCO
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
NOCO - Corporate Logo
T#:641108
Part#: GB40
In Stock
20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping
20% off MSRP
$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping

The GB40 is a compact lithium-ion battery jump starter pack capable of delivering 1,000 amps, allowing you to jump-start a dead battery within seconds. Equipped with patented safety technology, it ensures spark-proof connections and reverse polarity protection, making it user-friendly and safe for everyone. Not only does it serve as a powerful battery booster, but it also functions as a portable power source for charging USB devices such as smartphones and tablets. Designed to support vehicles like cars, boats, RVs, trucks, and more, it can handle gas engines up to 6 liters and diesel engines up to 3 liters.



Features:

  • Compact, yet powerful lithium jump starter rated at 1,000 Amps - up to 20 jump starts on a single charge.
  • An ultra-safe and mistake-proof design with spark-proof technology and reverse polarity protection, which allow it to safely connect to any battery.
  • An ultra-bright 100 lumen LED flashlight with 7 light modes, including SOS and emergency strobe.
  • Recharge your personal devices on the go, like smartphones, tablets, e-watches and more - up to 4 smartphone recharges.
  • Designed for gas engines up to 6 Liters and diesel engines up to 3 Liters for cars, boats, lawn mowers and more.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less