BMW Engine Parts for BMW 7 Series F02 (2009+)

Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:599759

Part#: 11377603979KT2

In Stock

$ 241.95 USD

Add to Wish List

Qty

$ 241.95 USD

Add to Wish List

Includes actuator, actuator gasket and valve cover gaskets

Aluminum Valve Cover - BMW N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:14915981

Part#: 11127570292M

In Stock

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

Tired of dealing with plastic valve covers that crank and split, causing frustrating oil leaks? This upgraded aluminum valve cover is the perfect solution! Without oil cap!

Show More Show Less

Rein Oil Pan Bolt Set - 11132210959 - E9x, F3x, E8x, F22, F23, E60, E...

2X Entries Into Our F80 M3 Sweepstakes

T#:379282

Part#: 11132210959

In Stock

$ 44.89

This product was last offered at the strikethrough price on
10-12-2026

$ 44.65 USD

Add to Wish List

Qty

$ 44.65 USD

Add to Wish List

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Show More Show Less

Elring Valve Cover Gasket Set - N55 3.0L, S55

2X Entries Into Our F80 M3 Sweepstakes

T#:399889

Part#: 11127587804

In Stock

$ 31.79 USD

Add to Wish List

Qty

$ 31.79 USD

Add to Wish List

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Show More Show Less

Oil Filter Housing Gasket KIT

10X Entries Into Our F80 M3 Sweepstakes

T#:637846

Part#: 1142753729312KT1

In Stock

Sale - Save 5% $ 97.99

This product was last offered at the strikethrough price on
08-17-2026

$ 93.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 97.99

This product was last offered at the strikethrough price on
08-17-2026

$ 93.49 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

OEM Elring Oil Pan Gasket - BMW N52 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2602231

Part#: 11137600482

In Stock

$ 31.79 USD

Add to Wish List

Qty

$ 31.79 USD

Add to Wish List

Metal/rubber gasket used to stop oil leaks, seals the oil pan to the engine block

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BMW N54 3.0L Valve Cover - Aluminum

10X Entries Into Our F80 M3 Sweepstakes

T#:14915983

Part#: 11127565284M

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

This aluminum valve cover from Bremmen is designed to eliminate issues stemming from brittle plastic valve covers. Cracked or warped valve covers can cause oil leaks, engine fault codes, vacuum leaks, and misfires.

Show More Show Less

Oil Filter Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5403248

Part#: 11427537293TMSKT

In Stock

Sale - Save 5% $ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 93.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 93.49 USD

Add to Wish List

Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

VANOS Solenoid Valve Kit - N52 N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:25805743

Part#: 11367585425TKT

In Stock

$ 112.55 USD

Add to Wish List

Qty

$ 112.55 USD

Add to Wish List

Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Elring Valve Cover Gasket - N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:362693

Part#: 11127565286

In Stock

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N54 3.0L

Show More Show Less

Ultimate Turbo Coolant Line Kit - BMW F01/02 F07/10 F06/12/13 N63 4.4...

10X Entries Into Our F80 M3 Sweepstakes

T#:21702986

Part#: F0XF1XCOOLANTKT

In Stock

Sale - Save 4% $ 210.61

This product was last offered at the strikethrough price on
10-21-2026

$ 203.11 USD

Add to Wish List

Qty

Sale - Save 4%

$ 210.61

This product was last offered at the strikethrough price on
10-21-2026

$ 203.11 USD

Add to Wish List

Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i

Show More Show Less

Elring Oil Pan Gasket - N52 N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:376168

Part#: 11137548031

In Stock

$ 37.99

This product was last offered at the strikethrough price on
10-26-2026

$ 37.59 USD

Add to Wish List

Qty

$ 37.59 USD

Add to Wish List

If oil is leaking from the seal at the oil pan and block, you will need a new oil pan gasket. It is also wise to change this any time you have to pull the oil pan gasket.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L
N54 3.0L

Show More Show Less

N55 Valve Cover OEM Elring

2X Entries Into Our F80 M3 Sweepstakes

T#:2438603

Part#: 11127570292

In Stock

$ 436.99

This product was last offered at the strikethrough price on
05-12-2026

$ 289.99 USD

Add to Wish List

Qty

$ 289.99 USD

Add to Wish List

Complete assembly with gaskets & hardware

VTT N54 Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

Oil Pan Gasket - With Bolts

10X Entries Into Our F80 M3 Sweepstakes

T#:5403247

Part#: 11132210959TMSKT

In Stock

Sale - Save 23% $ 83.99

This product was last offered at the strikethrough price on
10-28-2026

$ 64.48 USD

Add to Wish List

Qty

Sale - Save 23%

$ 83.99

This product was last offered at the strikethrough price on
10-28-2026

$ 64.48 USD

Add to Wish List

Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Elring Rear Crankshaft Seal

For vehicles with production date up to 01/2009

2X Entries Into Our F80 M3 Sweepstakes

T#:591493

Part#: 11117584398

In Stock

$ 23.99

This product was last offered at the strikethrough price on
10-26-2026

$ 23.15 USD

Add to Wish List

Qty

$ 23.15 USD

Add to Wish List

90x110x12mm - usually replaced when servicing the timing chains

Boost Solenoid/Pressure Converter - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:33646291

Part#: 11747626350

In Stock

$ 68.39 USD

Add to Wish List

Qty

$ 68.39 USD

Add to Wish List

Camshaft Position Sensor - Priced Each

Two required per engine, may be replaced separately as needed. Four required per engine, may be replaced separately as needed.

10X Entries Into Our F80 M3 Sweepstakes

T#:27105154

Part#: 13627525014

In Stock

$ 34.84 USD

Add to Wish List

Qty

$ 34.84 USD

Add to Wish List

N54 Valve Cover Upgrade Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:25772568

Part#: 11127565284MTKT

In Stock

$ 419.23 USD

Add to Wish List

Qty

$ 419.23 USD

Add to Wish List

The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

OEM Accessory Belt Service Kit - N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:554448

Part#: N54ACCKT

Ships in 3 Business Days

$ 187.99

This product was last offered at the strikethrough price on
10-19-2026

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

Oil Level Indicator - 12617607910

10X Entries Into Our F80 M3 Sweepstakes

T#:36913378

Part#: 12617607910

In Stock

$ 130.89 USD

Add to Wish List

Qty

$ 130.89 USD

Add to Wish List

The engine oil level sensor tracks the oil level in the engine's oil pan, sending real-time data to the ECU (Engine Control Unit). This vital information ensures the engine has the right amount of oil for proper lubrication. Commonly featured in modern vehicles, the oil level sensor acts as an essential safeguard against low oil levels, helping prevent potential engine damage.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...

T#:42200953

Part#: 13517616170RKT

Back Ordered

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.

Show More Show Less

Boost Solenoid/Pressure Converter - Kit - N54, N63

10X Entries Into Our F80 M3 Sweepstakes

T#:5416756

Part#: 11747626350TMSKT

In Stock

Sale - Save 43% $ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 233.69 USD

Add to Wish List

Qty

Sale - Save 43%

$ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 233.69 USD

Add to Wish List

Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install

Bremmen Parts Chain Tensioner - With Gasket Ring

10X Entries Into Our F80 M3 Sweepstakes

T#:556062

Part#: 11317584723

In Stock

Sale - Save 10% $ 79.99

This product was last offered at the strikethrough price on
10-21-2026

$ 71.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 79.99

This product was last offered at the strikethrough price on
10-21-2026

$ 71.99 USD

Add to Wish List

Addresses chain slap or other noise caused by a failed or failing tensioner

Elring Rear Crankshaft Seal - 11117587168 - N20 N52 N54 N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:340679

Part#: 11117587168

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N20
N52
N54
N55
S55

Show More Show Less

Check Valve - 11367541692

10X Entries Into Our F80 M3 Sweepstakes

T#:37655979

Part#: 11367541692

In Stock

$ 30.59 USD

Add to Wish List

Qty

$ 30.59 USD

Add to Wish List

A damaged, leaking, or missing vacuum check valve can lead to engine performance problems, trigger the check engine light, and potentially cause your vehicle to fail an emissions test.

Engine Oil Temperature Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:36777927

Part#: 13627580635

In Stock

$ 22.39 USD

Add to Wish List

Qty

$ 22.39 USD

Add to Wish List

Elring Oil Pan Gasket - E70 E71 F15 F16 F86 F01 F02 F10 F12 F13 F85 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:596428

Part#: 11137566644

In Stock

$ 33.43

This product was last offered at the strikethrough price on
09-28-2026

$ 23.79 USD

Add to Wish List

Qty

$ 23.79 USD

Add to Wish List

N54 Valve Cover upgrade kit

10X Entries Into Our F80 M3 Sweepstakes

T#:6196925

Part#: 11127565284TKT

In Stock

Sale - Save 9% $ 326.99

This product was last offered at the strikethrough price on
10-29-2026

$ 296.23 USD

Add to Wish List

Qty

Sale - Save 9%

$ 326.99

This product was last offered at the strikethrough price on
10-29-2026

$ 296.23 USD

Add to Wish List

You want to keep your N54 running properly to enjoy the drive and justify the costs associated with owning an N54 car! This kit has a replacement valve cover for your current cover that is worn or damaged. Along with replacing the valve cover this kit includes an upgraded pcv valve. This upgraded PCV valve uses machined metal components in place of the stock plastic parts, resulting in a more durable part. While replacing your valve cover a common failure is one of the blow by pcv vent hose cracks and is also INCLUDED in the kit for a full proof valve cover upgrade service! Replace and upgrade your valve cover at the same time, with the VTT PCV valve for longer PCV life and better flow.

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55

10X Entries Into Our F80 M3 Sweepstakes

T#:15511870

Part#: 832123659460KT

In Stock

$ 136.26 USD

Add to Wish List

Qty

$ 136.26 USD

Add to Wish List

This oil change kit has everything you need for an easy oil change, including seven liters of oil, an oil filter, and a drain plug.

High-Performance Ignition Service Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:583535

Part#: N54PISKT1

In Stock

$ 228.29 USD

Add to Wish List

Qty

$ 228.29 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 BOSCH Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet

Show More Show Less

Accessory Belt Tensioner Assembly

10X Entries Into Our F80 M3 Sweepstakes

T#:32350851

Part#: 11288604266

In Stock

$ 48.59 USD

Add to Wish List

Qty

$ 48.59 USD

Add to Wish List

Fuel Pump Control Module

10X Entries Into Our F80 M3 Sweepstakes

T#:33746531

Part#: 16147411596

In Stock

$ 135.19 USD

Add to Wish List

Qty

$ 135.19 USD

Add to Wish List

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

10X Entries Into Our F80 M3 Sweepstakes

T#:640488

Part#: 24117571217

In Stock

$ 79.89 USD

Add to Wish List

Qty

$ 79.89 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

BMW N20 N52 N55 Timing Chain

10X Entries Into Our F80 M3 Sweepstakes

T#:5470985

Part#: 11318648732

In Stock

Sale - Save 27% $ 56.30

This product was last offered at the strikethrough price on
08-10-2026

$ 40.99 USD

Add to Wish List

Qty

Sale - Save 27%

$ 56.30

This product was last offered at the strikethrough price on
08-10-2026

$ 40.99 USD

Add to Wish List

BMW N20 N52 N55 Timing Chain addresses the common issue of timing chain stretch and rattling over time. Although BMW designates the timing chain as a lifetime part, many enthusiasts choose to replace it preemptively. Turner Motorsport offers this direct-fit replacement for those needing to replace a worn or damaged timing chain without opting for a full kit.

Direct Fit Replacement: Perfect for replacing a stretched or broken timing chain.
High-Quality Construction: Ensures durability and reliability in maintaining engine timing.
Ease of Installation: Designed to fit precisely without requiring additional modifications.
Ideal for Maintenance: A practical choice for enthusiasts who prefer to change the timing chain independently of a full kit.

Show More Show Less

Timing Chain With Tensioner Rail

For Pre-LCI engines only, will not fit the N63N engine found in LCI models

10X Entries Into Our F80 M3 Sweepstakes

T#:26305109

Part#: 11317567500

In Stock

$ 79.19 USD

Add to Wish List

Qty

$ 79.19 USD

Add to Wish List

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

In Stock

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Elring Crankshaft Seal - Front

For vehicles with a production date up to 02/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:362853

Part#: 11117547842

In Stock

$ 22.99

This product was last offered at the strikethrough price on
10-26-2026

$ 22.29 USD

Add to Wish List

Qty

$ 22.29 USD

Add to Wish List

65x79x10 - Usually replaced when servicing the timing chains

OEM Elring Valve Cover Gasket Set - Cylinders 1-4 - BMW N63/S63 4.4L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691316

Part#: 11127614700

In Stock

$ 48.99

This product was last offered at the strikethrough price on
09-03-2026

$ 36.49 USD

Add to Wish List

Qty

$ 36.49 USD

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.

Show More Show Less

OEM Elring Valve Cover Gasket Set - Cylinders 5-8 - BMW N63/S63 4.4L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691317

Part#: 11127614701

In Stock

$ 47.99

This product was last offered at the strikethrough price on
08-11-2026

$ 34.91 USD

Add to Wish List

Qty

$ 34.91 USD

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56038085

Part#: 11137600482KT4

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Rein Vent Pipe - Priced Each - 11158647961 - F07, F10 5 Series, F06 F...

2X Entries Into Our F80 M3 Sweepstakes

T#:7244416

Part#: 11158647961

In Stock

$ 318.99

This product was last offered at the strikethrough price on
06-29-2026

$ 171.99 USD

Add to Wish List

Qty

$ 171.99 USD

Add to Wish List

BMW N63 4.4L Vent Pipe

The BMW N63 4.4L Vent Pipe addresses common issues with oil separators freezing in cold weather conditions. This problem often occurs if the vehicle is driven before it is fully warmed up, leading to a howling noise and multiple oil leaks. The crankcase breather valve in the vent pipe purges oil vapor from the engine block into the valve cover. However, condensation can sometimes cause the valve to freeze, which may result in the oil separator system failing, cracking, or disintegrating. This replacement vent pipe ensures proper function and prevents costly damage by maintaining the integrity of the oil separator system.

Benefits:

Prevents Freezing Issues: Reduces the risk of oil separator failure in cold weather conditions.
Eliminates Oil Leaks: Helps prevent leaks caused by frozen oil separators.
Ensures Proper Ventilation: Maintains effective purging of oil vapor from the engine block.
Durable Construction: Built to withstand harsh weather conditions and engine stress.
Direct Replacement: Designed to fit seamlessly with BMW N63 4.4L engines.