BMW Engine Parts for BMW 7 Series F02 (2009+)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

N54 & E8x/E9x N55 Mosselman Billet Oil Thermostat

For Gasket/Install kit see T#4799665

T#:4621131

Part#: OTN54.T85

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

The N54 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.

Show More Show Less

VTT N54 Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37757295

Part#: 601-0240

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Precision Raceworks Replacement Ignition Coil - Blue

T#:4333508

Part#: 201-0091

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Replaces individual coils found in the Precision Raceworks Ignition Kit.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161736

Part#: 201-0405

Ships in 8 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

In Stock

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

N54 Replacement Spark Plug Wires - 6pk, Blue, Short (Factory Location...

T#:25374610

Part#: 201-0003

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Precision Raceworks BMW N54 Factory Location Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N54 High-Performance Ignition Kit. Engineered with low-resistance, high-performance technology, these spark plug wires are a fully custom design. Precision Raceworks is the only manufacturer worldwide to create spark plug wires with boots specifically designed for the N54 BMW, ensuring optimal fitment and superior quality.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Precision Raceworks Replacement Spark Plug Wires - Blue - Set of 6 - ...

T#:3786918

Part#: 201-0002

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0021 or 601-0149.

Show More Show Less

Precision Raceworks N54 N55 High Performance Ignition Kit - OEM Manif...

T#:1271579

Part#: 601-0021

Back Ordered

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!

Precision Raceworks N54 N55 High Performance Ignition Kit - OEM Manif...

T#:38229099

Part#: 601-0108

Ships in 10 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!

Vargas Ignition Coil Kit (Red) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Precision Raceworks Replacement Ignition Coil - Black

T#:24843089

Part#: 201-0121

Ships in 10 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Vargas Ignition Coil Kit (Blue) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309605

Part#: VTT-COIL-N5X-BLU

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:11497326

Part#: VTT-N54-DI-DELET

In Stock

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - Black - Set of 6 -...

T#:38195386

Part#: 201-0129

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0108 or 601-0150.

Show More Show Less

VTT N54 Vacuum Pump Block Off Plate

2X Entries Into Our F80 M3 Sweepstakes

T#:11497328

Part#: VTT-N54-VACUUM-B

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733525

Part#: VTT-CRANKHUB-3

In Stock

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

In Stock

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Oil Pan Gasket for N52 N55 3.0L

T#:641949

Part#: 11137600482

In Stock

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Ensure a leak-free BMW N52 or N55 3.0L engine with the Oil Pan Gasket. If you've noticed oil stains on your driveway, it could be a sign of a failing gasket. Replace it promptly to prevent further leaks and maintain the optimal performance of your BMW.

Leak Prevention: The Oil Pan Gasket effectively seals the oil pan, preventing oil leaks.
Common Leak Source: Addresses a common source of oil leaks in N52 and N55 3.0L engines.
Optimal Engine Performance: Ensures the engine operates without oil seepage, maintaining efficiency.
Easy Replacement: Ideal for DIY oil pan projects, making replacement hassle-free.

Upgrade your BMW's engine reliability with the N52/N55 3.0L Oil Pan Gasket, designed to keep your driveway oil-free.

Show More Show Less

Billet Check Valve - 10 Barb

2X Entries Into Our F80 M3 Sweepstakes

T#:597641

Part#: VTT-CHECK-2

Ships in 3 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships on Nov 17, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122266

Part#: VTTFILTERCAPCLR

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

BMW N54 3.0L Billet Vaccum Relief Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:597525

Part#: VTT-VAC-RELIEF

In Stock

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

BMW N54 3.0L Billet Vacuum Relief Valve from Vargas Turbo Technologies offers precise control over crankcase vacuum levels. This high-quality billet valve allows users to adjust the vacuum pressure with ease, eliminating guesswork and ensuring optimal engine performance. By simply adding or removing shims, users can tailor the vacuum level to their needs.

Customizable Vacuum Levels: Adjust the vacuum pressure using supplied shims to achieve desired performance.
Direct Fit: Designed with -10ORB threads for easy installation into VTT modular PCV solutions and VTT Modular CNC valve covers.
Versatile Settings: Includes 5 vacuum settings ranging from 10' to 18' of vacuum based on shim configuration.
Enhanced Engine Protection: Helps prevent excessive vacuum that could affect engine seals or cause whistling.

Show More Show Less

Victor Reinz Crankshaft Seal - Front

For vehicles with a production date up to 02/2011

T#:374340

Part#: 11117547842

In Stock

$ 34.00

This product was last offered at the strikethrough price on
09-26-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

65x79x10 - Usually replaced when servicing the timing chains

Victor Reinz Intake Gasket Set - E70, E71, F01, F02, F06, F07, F10, F...

Two sets required per engine

T#:373815

Part#: 11617547242

Ships in 2 Business Days

$ 68.99

This product was last offered at the strikethrough price on
05-07-2026

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

1 for each intake runner 6 in total

Flapper Delete Fitting - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557962

Part#: VTT-FLAPPER-DELE

Ships on Nov 17, 2026

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Ships on Nov 27, 2026

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 6 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

BMW N54 3.0L Wastegate Rattle Fix Repair Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:398014

Part#: VTT-N54-WF2

Ships on Nov 18, 2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

VTT N54 Waste Gate Repair Kit / Rattle Fix Tired of the annoying N54 Wastegate Rattle? Turbos still going strong, but can't deal with the embarrassing rattle anymore? We have the perfect kit for you. This kit comes with 1 set (both turbos) of Stainless Steel wear matched bushing, and flapper assembly, Wastegate arm, rod end, and Stainless steel 8mm C clip. These parts custom made for VTT upgrade the flapper assembly to a full 12.6MM or 1/2" flapper arm, and bushing compared to the stock 11.5mm. They also get rid of the 6mm rod end connection to a full 8mm connection with a stainless steel C clip. There is no better N54 Waste Gate upgrade on the market, and guess what? We also offer them for less than other upgrades which use the stock bushing size, rod end, and inferior materials. If you want to fix this right the first time, this is the kit for you! *Please note, assembly is required. This kit can only be installed with the turbos removed from the vehicle, and stock wastegate assembly removed from the housing. The new assemblies will need to be pressed in, then welded by a qualified welder. We offer no warranty, or returns for improperly installed wastegate assemblies.

Show More Show Less

BMW Secondary Pump Activation Harness - BMW E9X F22/23 F3X F8X ...

T#:38094337

Part#: 201-0049

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.

Show More Show Less

Precision Raceworks N55 "Gauntlet" HPFP Upgrade - BMW N55 3.0L ...

For vehicles with the newer style HPFP driven by the camshaft - Not for vehicles with t...

T#:47164974

Part#: 201-0423

Back Ordered

$ 1,660.00 USD

Add to Wish List

Qty

$ 1,660.00 USD

Add to Wish List

Introducing the N55 Gauntlet High-Pressure Fuel Pump, the latest innovation from Precision Raceworks, built to outperform and provide unmatched value for N55 enthusiasts. Engineered to flow 70% more fuel than stock and 4% more than the original Big Bore, the Gauntlet sets a new standard in high-performance fuel delivery. Whether you’re looking to maximize power or prepare for future upgrades, the Gauntlet HPFP is designed to meet your needs with exceptional performance and reliability. The Gauntlet HPFP supports up to 240 bar fuel rail pressure, providing consistent fuel delivery for even the most demanding applications. Whether you’re running pump gas, E85, or any blend in between, the Gauntlet is proven through over 60,000 miles of on-road testing and dynamic testing on HPFP test benches.

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - Stock Location - B...

T#:1271580

Part#: 201-0130

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Precision Raceworks' BMW N54 replacement spark plug wires are the same plug wires that are included in their High-Performance N54 Ignition Kit. These wires are 100% custom design from the ground up by Precision Raceworks, the only company in the world to produce plug wires with boots specific for your N54 BMW to ensure proper fitment and quality. Plug wires are sold in packs of 6 so you get all new plug wires every time. So, replace the one you need and keep the rest for spares or replace all 6. All components used meet or exceed OEM requirements and feature seals that are both dust and water-resistant.

Show More Show Less

Precision Raceworks Coolant Cap Bundle - Blue - Most BMWs from 2016 t...

Must Swap Pressure Relief Valve From PN #17117639021 to New Unit. Other Pressure Relief Valves Will Not Apply

T#:47679258

Part#: 622-0291-BLU

Ships in 10 Business Days

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

The Precision Raceworks Billet Coolant Cap Set is a functional and stunningly stylish way to add a nice touch to any engine bay! These caps come in three color options, so there is always a color that will work for you! Black with Billet Silver, Black with Blue, and the Stealth series (all black). Many people don't realize it, but the OEM caps have a pressure release valve built into them. Oftentimes, aftermarket companies don't know this either or just don't care. But our team cares about proper function just as much as we care about the appearance of every product we design. For pressure relief, our caps incorporate the OEM internals, so you get all the functionality of the original caps, ensuring a safe and reliable system in place. These caps offer superior style and performance-grade components that guarantee a reliable fit every time. Durable billet aluminum construction provides long-lasting protection and dependability that will upgrade your engine bay for years to come. PLEASE NOTE: These do require assembly and swapping the pressure relief valves from your old caps to your new billet caps.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122280

Part#: TRIPLECAPRED1

In Stock

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Precision Raceworks Ethanol Sensor Breakout Harness

T#:35559424

Part#: 201-0411

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

n Ethanol Sensor Breakout Harness provides a clean wiring solution by splitting the signal from your ethanol content sensor between two analyzers, such as an ECU/controller and a gauge or Bluetooth display, without modifying your existing harness.his setup enables real-time ethanol level monitoring and facilitates comprehensive DME/ECU adjustments for enhanced automotive performance.citeturn0search0

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Billet 1/2" Check Valve - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557954

Part#: VTT-CHECK-1

Ships in 2 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Precision Raceworks N54 N55 High Performance Ignition Kit - Aftermark...

T#:35256049

Part#: 601-0150

Ships in 10 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 or N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

Ships in 10 Business Days

$ 959.99 USD

Add to Wish List

Qty

$ 959.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 7 Series F02 (2009+)

Sub-Categories

Fuel Filter Replacement Guidelines:

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results