BMW Internal Engine Parts for BMW 6 Series F06 (2013+)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

CP-Carrillo Forged Connecting Rod Set - H-Beam

T#:21933062

Part#: CAR-CRS-S63-WMC

Ships on Oct 6, 2026

$ 2,399.99 USD

Add to Wish List

Qty

$ 2,399.99 USD

Add to Wish List

Carrillo connecting rods are renowned in the world of professional racing and street performance for a reason – they consistently deliver a premium product that champions worldwide rely on. At Carrillo Industries, quality and pride are inseparable. Crafting a Carrillo rod goes beyond the standard processes of cutting, forging, and meeting production targets. It's about the unwavering commitment to victory. Carrillo rods have proven their mettle in both street and racing S63 engines, earning a place in the hearts of racers who demand the very best. Key Features: Special Chrome-Moly-based alloy Forged Rods Lightweight design for reduced mass compared to stock Proven strength in racing environments Rigorous quality control with tight tolerances and balancing Comes complete with high-quality, non-stretch WMC Rod Bolts When it's time to elevate your engine's performance, trust Carrillo connecting rods to deliver the ultimate combination of strength, precision, and reliability. Join the ranks of those who settle for nothing but the best in the pursuit of excellence.

Show More Show Less

Carrillo Custom Pistons For S63 Bore 3.5059 CR 10:1 Coated For Alusil...

T#:29334031

Part#: J469717

Back Ordered

$ 2,429.99 USD

Add to Wish List

Qty

$ 2,429.99 USD

Add to Wish List

WPC Treated Genuine BMW Bearings - Single Bearing

10X Entries Into Our F80 M3 Sweepstakes

T#:5470995

Part#: 11247617339WPC

In Stock

Sale - Save 31% $ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.63 USD

Add to Wish List

Qty

Sale - Save 31%

$ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.63 USD

Add to Wish List

JE Pistons BMW N55B30

T#:33612897

Part#: 3380966

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.

Show More Show Less

JE Pistons BMW N55B30 84mm Bore 9.5:1 Compression Ratio -14.7 Dish FS...

T#:590161

Part#: 338096

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons BMW N55 Single

T#:33846578

Part#: 338096S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

B

JE Pistons BMW N55B30 Piston - 3.307 in Bore

Transform your BMW N55B30 engine with the high-performance JE Pistons Piston, engineered for those who demand power, efficiency, and reliability. With a precise 3.307-inch bore size, this piston is designed to enhance combustion dynamics, resulting in improved horsepower and torque. Crafted from premium forged aluminum, the JE piston is built to endure the rigors of high-performance driving, making it an ideal choice for both track enthusiasts and everyday drivers.

Key Features:

Optimized Design: Each piston is meticulously crafted to ensure a perfect fit for the N55B30 engine, maximizing combustion efficiency and overall engine performance.
3.307-Inch Bore: This specific bore size enhances airflow and combustion efficiency, enabling your engine to unleash its full power potential while maintaining reliability.
Durable Forged Construction: Made from high-quality forged aluminum, this piston offers exceptional strength and lightweight properties, making it capable of withstanding extreme conditions found in performance applications.
Enhanced Combustion Characteristics: The uniquely designed piston crown promotes efficient fuel burn, reducing the chances of detonation and improving power delivery across the RPM range.
Trusted Performance: JE Pistons are renowned in the automotive community for their durability and reliability, making them a preferred choice for high-performance builds.

Applications:

Fits BMW N55B30 Engines – Perfect for high-performance applications, whether on the track or on the street.
Ideal for builders looking to enhance their engine’s capabilities, ensuring maximum power and efficiency.

Technical Specifications:

Bore Size: 3.307 inches, specifically designed for optimal performance in the N55B30 engine.
Material: Premium forged aluminum for lightweight and strength.

Show More Show Less

BMW N55 JE Piston ULTRA SERIES

T#:33612896

Part#: 367880

Back Ordered

$ 1,674.99 USD

Add to Wish List

Qty

$ 1,674.99 USD

Add to Wish List

JE Pistons for the N55 engine are high-performance forged pistons designed for BMW’s single-turbo 3.0L inline-six. Built for strength and durability under high boost, they feature optimized crown shapes and valve reliefs for better combustion. The lightweight design reduces rotational mass, improving throttle response and efficiency. With options for compression ratios and coatings, these pistons are perfect for tuning and motorsport use, delivering reliable performance on the street or track.

Show More Show Less

BMW N55B30 ULTRA SERIES

T#:33612895

Part#: 367879

In Stock at Vendor

$ 1,674.99 USD

Add to Wish List

Qty

$ 1,674.99 USD

Add to Wish List

JE Pistons for the N55 engine are high-performance forged pistons designed for BMW’s single-turbo 3.0L inline-six. Built for strength and durability under high boost, they feature optimized crown shapes and valve reliefs for better combustion. The lightweight design reduces rotational mass, improving throttle response and efficiency. With options for compression ratios and coatings, these pistons are perfect for tuning and motorsport use, delivering reliable performance on the street or track.

Show More Show Less

BMW N55B30 JE Pistons

T#:33612902

Part#: 338097

Back Ordered

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 6 Series F06 (2013+)

Sub-Categories

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

Spline Lock Crank Hub Solution

CP-Carrillo Forged Connecting Rod Set - H-Beam

Carrillo Custom Pistons For S63 Bore 3.5059 CR 10:1 Coated For Alusil...

WPC Treated Genuine BMW Bearings - Single Bearing

JE Pistons BMW N55B30

JE Pistons BMW N55B30 84mm Bore 9.5:1 Compression Ratio -14.7 Dish FS...

JE Pistons BMW N55 Single

Key Features:

Applications:

Technical Specifications:

BMW N55 JE Piston ULTRA SERIES

BMW N55B30 ULTRA SERIES

BMW N55B30 JE Pistons

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results