BMW Exhaust Parts Mufflers & Catalytic Converters for BMW 6 Series F06 (2013+)

Clear BMW chassis
Performance exhaust options from the best BMW aftermarket producers and the most reliable replacement maintenance parts are all at Turner Motorsport. Over time, factory exhaust on the cleanest examples of BMW heritage shows their age. Our factory replacement exhausts are just what you need to keep your favorite car in showroom condition or finish off your restoration. If you are looking for a bump in sound and power, you can also find our performance options like Headers, Downpipes, and Mufflers from Corsa, DINAN, and others on this page.

F13 M6 Turner Axle-Back Sport Mufflers
F13 M6 Turner Axle-Back Sport Mufflers
Turner Motorsport has partnered with Corsa Exhausts for t...
Turner Motorsport - Corporate Logo
T#:339004
Part#: TENF1347
Direct Ship
Starting at $1,599.00
Free Shipping
Starting at $1,599.00
Free Shipping

Turner Motorsport has partnered with Corsa Exhausts for the development of sport mufflers for the F13 M6. Our goals were to boost horsepower and torque and make a more pleasing sound than hushed sounds of the stock M6 exhaust system. The Turner/Corsa Sport exhaust for the M6 works with the Active Sound to make more growl and rumble so you can actually enjoy the V8 sound. Using stainless steel tubing with their performance muffler design they are able to reduce exhaust restriction compared to the stock system. As well as the tuned exhaust note and drone-eliminating sound, the mufflers use a straight-thru flow design for maximum flow and the least amount of restriction. Decreasing the back-pressure helps the turbos work more efficiently, processing exhaust gases easier and releasing more horsepower and torque. Power gains on the dyno were measured at 13hp and 18ft-lbs of torque compared to stock. Also included is the patented Corsa Reflective Sound Cancellation to eliminate drone (a common problem with most straight-through muffler designs). This system was developed on our own M5 and it makes slightly more burble and throatiness than stock while remaining composed and civilized. The new sound is especially noticeable from outside the car where there is a bit more 'boom' to go with the M6's immense punch.

Reflective Sound-Cancellation (RSC) technology - This feature is a patented non-electrical noise control system, where engine sound (pressure) waves are reflected in passages inside the muffler 180 degrees out of phase to cancel out unwanted sound waves. The result is a tuned muffler that "cleans up" the noise without eliminating the pure sound of power associated with a high-performance vehicle. Using the Corsa technology, the stainless steel mufflers are tuned to eliminate passenger cabin resonance and produce just the "right" sound. The result is quieter cruising with an awe-inspiring roar at full throttle. This system is amazingly quiet during normal cruising, due to the "no drone" RSC technology, yet still has an aggressive presence and full sound while under throttle. This makes for ideal sound for those that want an aggressive "roar" while driving hard, yet still want a more discrete lower volume for normal cruising.

This is an axle-back system, which replaces only the rear mufflers of the stock M6 exhaust. It's very easy and straightforward to install and the rest of the exhaust can remain on the car. The mufflers are designed to install at an existing cut-point in the factory exhaust which makes it easy to reinstall the original exhaust at any time (factory sleeve clamps required to reinstall). Multiple tip styles are available (the tips are shared with our Race Inspired muffler delete). This system is 100% Made in the USA and carries a lifetime warranty from the manufacturer. This exhaust is emissions legal in all 50 states (no effect whatsoever on emissions, and there will not be any "Check Engine" warning lights). Installation instructions are available by clicking here.

section:rear mufflers

connects to:stock exhaust after the rear axle

tip style:polished stainless or black 102mm (4.0") quad round with Turner logo

material:T304 stainless steel


This item fits the following BMWs:
2013+ F12 F13 BMW M6

Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust
Turner F13 M6, F06 M6 Gran Coupe Race Inspired Axle-Back Exhaust ...
Our Race Inspired exhaust deletes the rear mufflers in th...
Turner Motorsport - Corporate Logo
T#:338836
Part#: F13-M6-EXHAUST
Direct Ship
Starting at $1,249.00
Free Shipping
Starting at $1,249.00
Free Shipping

Our Race Inspired exhaust deletes the rear mufflers in the F13 M6 and F06 M6 Gran Coupe to allow more of the exhaust sound to be heard. We love our M6 but it's just too quiet so we looked at ways to get more of the stock exhaust to be heard. After evaluating the stock exhaust layout it was easy to see that removing the rear mufflers would accomplish what we wanted. But cutting the mufflers off is just the beginning. We then had to develop a set of pipes and design a set of tips that fit perfectly and also looked right at home on the Coupe and Gran Coupe. Our Race Inspired Exhaust is the finished product.

Our axle-back exhaust is made from a 304 stainless steel tube in the same diameter as the stock exhaust and with mandrel bends for unimpeded flow. It fits with the stock hangers and is clamped to the stock exhaust pipes once the factory mufflers are cut off. The entire installation can be done in about an hour with the exhaust on the car. With factory BMW clamps, available from us as well, you can easily re-install your stock mufflers at any time. Our tips are also stainless in a perfectly proportioned 102mm (4.0" diameter). They fill out the rear bumper valence perfectly - not too small like stock and not boy-racer large. Tips are available in polished silver or satin black. We have designed our tips to fit both the standard coupe and Gran Coupe bumpers.

The final result is that removing the stock mufflers really lets the M6 V8 sing! With the mufflers and flapper valves removed the sound on start-up is scintillating. The sound from the S63TU engine is robust and intoxicating - it just needs to be heard! From outside, the muffler-delete exhaust makes the car seem all the more impressive. From the burble at idle to the roar under full throttle there is little doubt that this is a proper M car. Inside the car during normal driving the sound is not changed much thanks to the Active Sound Design system. It's a little louder but not intrusive or irritating. Around town the car sounds much like stock but just a touch louder and deeper. The exhaust pops and burbles more with each downshift, especially in Sport Plus Mode. On the highway at 70-80 cruising speeds it sounds similar to the stock exhaust. As far as "drone" goes-- we only experienced a slight drone at very low speeds in a high gear (i.e. - lugging the engine) which we normally wouldn't do. If you purchase this system and it's simply too loud for your neighbors or wife's taste, we have the simple solution. We sell resonators that bolt in place, knocking the volume down by approximately 50%.

Our Race Inspired M6 exhaust is perfect for enhancing and accentuating the stock sound. It lets more of the M6's soundtrack come through without extensive exhaust modifications. If you want to enjoy the M6's sound more, think of this as its volume knob turned up.


Click here for more in-depth information on the development and installation of the M5/M6 muffler-delete system, including video and photos.


This item fits the following BMWs:
2012+ F12 F13 BMW M6 Coupe, M6 Convertible
2012+ F06 BMW M6 Gran Coupe

O2 Sensor Bung and Plug
O2 Sensor Bung and Plug
O2 Sensor Bung and plug. This weld-in bung allows an O2 s...
Packaged by Turner - Corporate Logo
T#:339000
Part#: TEN9949O2S
In Stock
Sale - Save 57% $6.95
Starting at $3.00
Free Shipping on orders $99 and up
Sale - Save 57% $6.95
Starting at $3.00
Free Shipping on orders $99 and up
Made in the USA O2 Sensor Bung and plug. This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing. A threaded plug is included to cap off when not in use. Bung and cap/plug are both 100% stainless steel. The bung and plug are also available separately (in case you don't need both). Simply choose your option below.
    TMS Oxygen Sensor Bung Specs:
  1. Material 304 stainless steel
  2. 1.00" / 25.4mm OD
  3. 0.50" / 12.7mm Tall
  4. Thread size and pitch M18x1.5
    TMS O2 Sensor Plug & Crush Ring Specs
  1. Material 304 stainless steel
  2. 10mm female hex for install and removal
  3. Thread size and pitch M18x1.5
  4. Copper Crush Ring for leak free installation
Install Tips
  • Locate bung as close to engine a possible, without exceeding the maximum operating temperature for the O2 sensor. The suggested location is just down-stream of the merge-collector on each bank of cylinders.
  • Sensors located after upstream exhaust system leaks or too close to exhaust outlets are susceptible to poor readings or influence of ambient air
  • O2 Sensors exposed to exhaust gasses with too high amount of un-burnt fuel can lead to misleading readings. A possible lean reading.
  • Locate sensor/bung 90deg to exhaust gas stream.
  • Locate sensor/bung in tube with a minimum of 10deg up angel to prevent liquid build up in sensor element.
  • Use stainless steel welding wire or rod when installing bung.
  • Do not have bung plug or a oxygen sensor installed when welding bung in place.
  • Welding can distort the bung so it is recommended you chase/tap the threads of the bung after welding.
  • When installing O2 sensor or plug, use an O2 sensor compatible high temperature resistant grease on the threads.
  • Use tightening torque suggested by O2 senor manufacturer.

BMW M Performance Chrome Tailpipe Tip - F3X N55, F22 N55 B58
Genuine BMW M Performance - Corporate Logo
T#:185118
Part#: 18302354364
In Stock
$87.37
Free Shipping on orders $99 and up
Genuine BMW M Performance Tailpipe Tip,

BMW M Performance Muffler System - F06,F12,F13 650i/i xDrive
BMW M Performance Muffler System - F06,F12,F13 650i/i xDrive ...
Upgrade to the M Performance mufflers from BMW with this ...
Genuine BMW M Performance - Corporate Logo
T#:182805
Part#: 18302293764
Ships in 2 Days
9% off MSRP $2,280.00
$2,075.04
9% off MSRP $2,280.00
$2,075.04

Upgrade to the M Performance mufflers from BMW with this retrofit kit for a more free flowing exhaust system and more aggressive exhaust note.


Genuine BMW Muffler System - F12N63
This item fits the following BMW Chassis:
F06,F12,F13

Fits BMW Engines including:
N63,N63N

BMW M Performance Titanium Exhaust Tip - F06/10/12/13 M5 M6
BMW M Performance Titanium Exhaust Tip - F06/10/12/13 M5 M6 ...
If your exhaust tips have been damaged or are missing, th...
Genuine BMW M Performance - Corporate Logo
T#:185116
Part#: 18302348836
Ships in 2 Days
$263.02
Free Shipping

If your exhaust tips have been damaged or are missing, this replacement tip is the answer to bringing your car back to its original appearance. This is a single tip and clamp. Four tips are required for the M5/M6 M Performance mufflers.


Genuine BMW Tailpipe Tip In Titanium - M Performance
This item fits the following BMW Chassis:
F06,F10,F12,F13

Fits BMW Engines including:
S63N


Exhaust System Rubber Mount 18207832991
Exhaust System Rubber Mount 18207832991
GENUINE BMW RUBBER MOUNTING:189999
Genuine BMW - Corporate Logo
T#:12675
Part#: 18207832991
In Stock
13% off MSRP $32.69
$28.45
Free Shipping on orders $99 and up
13% off MSRP $32.69
$28.45
Free Shipping on orders $99 and up
GENUINE BMW RUBBER MOUNTING:189999
Genuine BMW M8 Copper Exhaust Lock Nut - BMW
Genuine BMW M8 Copper Exhaust Lock Nut - BMW
Replaces your exhaust hardware every time it is taken apa...
Genuine BMW - Corporate Logo
T#:7032
Part#: 18307620549
In Stock
$1.25
Free Shipping on orders $99 and up
Replaces your exhaust hardware every time it is taken apart to prevent seized nuts and bolts.&Newline; &Newline;

Genuine BMW Hex Nut Wiht Flange - M8
This item fits the following BMW Chassis:
E36 M3,E60 M5,E63 M6,E46 M3,E82 1M Coupe,E36,E39,E46,E63,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83


Genuine BMW Gasket Asbestos Free - 11428624158
Genuine BMW Gasket Asbestos Free - 11428624158
Genuine BMW Gasket Asbestos FreeThis item fits the follow...
Genuine BMW - Corporate Logo
T#:212369
Part#: 11428624158
In Stock
$11.80
Free Shipping on orders $99 and up


Genuine BMW Gasket Asbestos Free
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N63,N63N,S63,S63N


Genuine BMW Flange Nut - 18407502196
Genuine BMW Flange Nut - 18407502196
Secures the exhaust manifold to the head. Used on all BMW...
Genuine BMW - Corporate Logo
T#:48753
Part#: 18407502196
In Stock
$1.95
Free Shipping on orders $99 and up

Secures the exhaust manifold to the head. Used on all BMW N-series motors that are turbo-charged.


Genuine BMW Flange Nut
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N54,N54T,N55

Genuine BMW Post-Cat Oxygen Sensor, 550mm 11787645875 - F22 M235, F3X 335/435, F06/F12 640, F10 535, F87 M2
Genuine BMW Post-Cat Oxygen Sensor, 550mm 11787645875 - F22 M235, F3...
The oxygen sensor is part of your BMW's emissions... from 7/2013 production date
Genuine BMW - Corporate Logo
T#:185061
Part#: 11787645875
Ships in 2 Days
17% off MSRP $282.39
$234.56
Free Shipping
17% off MSRP $282.39
$234.56
Free Shipping

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - from 08/2013

Genuine BMW Oxygen Sensor - N53 N63
Genuine BMW Oxygen Sensor - N53 N63
Genuine BMW Lambda Monitor Sensor - L= 560MmThis item fi...
Genuine BMW - Corporate Logo
T#:37721
Part#: 11787614322
Ships in 2 Days
15% off MSRP $282.39
$241.43
Free Shipping
15% off MSRP $282.39
$241.43
Free Shipping

Genuine BMW Lambda Monitor Sensor - L= 560Mm
This item fits the following BMW Chassis:
E71,E85,E86,E89 Z4,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N52,N52N,N63,N63N,S63



Genuine BMW Pre-Cat Oxygen Sensor, 740mm 11787596924 - F22 M235, F3X 335/435, F06/F12 640, F10 535, F87 M2
Genuine BMW Pre-Cat Oxygen Sensor, 740mm 11787596924 - F22 M235, F3X...
The oxygen sensor is part of your BMW's emissions...
Genuine BMW - Corporate Logo
T#:14690
Part#: 11787596924
Ships in 2 Days
17% off MSRP $352.98
$293.19
Free Shipping
17% off MSRP $352.98
$293.19
Free Shipping

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

Genuine BMW Regulating Lambda Probe - L= 740Mm

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Genuine BMW Pre-cat Oxygen Sensor, 520mm - F22 M235, F3X 335/435, F06/F12 640, F10 535, F87 M2
Genuine BMW Pre-cat Oxygen Sensor, 520mm - F22 M235, F3X 335/435, F0...
The oxygen sensor is part of your BMW's emissions... For vehicles with a production date from 07/2013
Genuine BMW - Corporate Logo
T#:14689
Part#: 11787596908
Ships in 2 Days
17% off MSRP $352.98
$293.19
Free Shipping
17% off MSRP $352.98
$293.19
Free Shipping

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - From 08/2013

Genuine BMW Post-Cat Oxygen Sensor, 690mm 11787589475 - F22 M235, F3X 335/435, F06/F12 640, F10 535, F87 M2
Genuine BMW Post-Cat Oxygen Sensor, 690mm 11787589475 - F22 M235, F3...
The oxygen sensor is part of your BMW's emissions... Up to 07/2013 production date
Genuine BMW - Corporate Logo
T#:370951
Part#: 11787589475
Ships in 2 Days
17% off MSRP $282.39
$234.56
Free Shipping
17% off MSRP $282.39
$234.56
Free Shipping

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - up to 08/2013


BMW M Performance Exhaust - F12 640i, F06 640i Gran Coupe
BMW M Performance Exhaust - F12 640i, F06 640i Gran Coupe
This is a factory BMW M Performance exhaust for the 2011+...
Genuine BMW - Corporate Logo
T#:338029
Part#: 18302354363
Ships in 2 Days
Sale - Save 9% $1,614.74
Starting at $1,485.29