Home
Engine Parts
Drive Belts, Pulleys, Tensioners

BMW Drive Belts & V-Belts for BMW 6 Series F06 (2013+)

Clear BMW chassis

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:

OEM INA Accessory Belt Tensioner Assembly - N55 S55

We Price Match - Give Us A Call or Chat!

T#:394063

Part#: 11288604266

In Stock

$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:554453

Part#: 11288673720

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Belt - N55 F Chassis ...

10X Entries Into Our F80 M3 Sweepstakes

T#:5858461

Part#: 8PK1390

In Stock

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Replaces BMW # 11287628661 Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.

Show More Show Less

OEM INA Idler Pulley -- N55

We Price Match - Give Us A Call or Chat!

T#:402395

Part#: 11287615130

In Stock

$ 35.34

This product was last offered at the strikethrough price on
05-06-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less

MMR Crank Hub Kit - N55/S55

T#:4565824

Part#: MMR20-1003FK

Ships in 2 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.

Show More Show Less

Bav Auto Ratcheting Serpentine Belt Wrench Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580390

Part#: B8800077

In Stock

Sale - Save 10% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW E70 E71...

10X Entries Into Our F80 M3 Sweepstakes

T#:21933046

Part#: 8PK1478

Ships on Nov 12, 2026

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Replaces BMW # 11287628659 and 11287589365 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Bav Auto Stretch Belt Installer Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580430

Part#: B8800123

In Stock

Sale - Save 10% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.29 USD

Add to Wish List

Bav Auto's stretch belt installer tool is helpful in installing some BMW accessory belts.

Bav Auto Stretch Belt Installer Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580415

Part#: B8800108

In Stock

Sale - Save 55% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.99 USD

Add to Wish List

Qty

Sale - Save 55%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.99 USD

Add to Wish List

This universal stretch belt installer can aid in drive belt installation. Recommended in conjunction with B8800123

Deflection Pulley

For vehicles with a production date up to 03/2016

We Price Match - Give Us A Call or Chat!

T#:593550

Part#: 11288604267

Special Order: No Guaranteed ETA

$ 49.48 USD

Add to Wish List

Qty

$ 49.48 USD

Add to Wish List

Accessory Belt Tensioner Assembly

We Price Match - Give Us A Call or Chat!

T#:578360

Part#: 11288604266

Special Order: No Guaranteed ETA

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Keep your N55 or S55-powered ultimate driving machine running at peak performance with this premium replacement automatic belt tensioner from Febi Bilstein.

BMW idler pulley

We Price Match - Give Us A Call or Chat!

T#:38385319

Part#: 11287589886

Special Order: No Guaranteed ETA

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

If your accessory belt idler pulley shows signs of excessive wear—such as wobbling, grinding, or squealing from a failing bearing—it should be replaced before it leads to belt failure. When replacing your idler pulley, it's a good time to inspect other belt drive components like the tensioner and belt for wear. Turner Motorsports offers a full selection of belts, tensioners, pulleys, and related hardware to keep your BMW’s belt drive system running smoothly.

Show More Show Less

Select Vehicle

Purpose

Category

Drive Belts, Pulleys, Tensioners

Brand

View All Brands

Price

Special Offers

Shipping