Home
Engine Parts
Gaskets, Gasket Sets, Seals, & O-Rings

BMW Gaskets, Gasket Sets, Seals, & O-Rings for BMW 6 Series F06 (2013+)

Gaskets are key to a properly running and clean engine. They obviously prevent fluid leaks but they're also critical in keeping air either in or out... Air leaks after the air flow meter, also known as vaccum leaks, can induce lean running conditions, fault codes, and poor running conditions. Other seals and gaskets are designed to keep air in. With the sensitivity of OBD systems, leaks will lead to fault codes very quickly which can be tough to diagnose and prevent you from passing state inspections.

We insist on Original BMW or OEM gaskets whenever possible.

Sub-Categories

Sort By:

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Comprehensive Valve Cover Gasket Kit - N63/S63

10X Entries Into Our F80 M3 Sweepstakes

T#:30164665

Part#: 11128648131KT2

Ships in 1-2 days

$ 169.99

This product was last offered at the strikethrough price on
09-01-2026

$ 146.00 USD

Add to Wish List

Qty

$ 146.00 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set - Left & Right High Pressure Fuel Pump Gasket (2) O-Ring Seals (6) Torx Screws (6) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Athena Cut Ring Head Gasket S63/N63

T#:26238393

Part#: ATH-HG-CR-S63-90

Ships in 4 Business Days

$ 445.99 USD

Add to Wish List

Qty

$ 445.99 USD

Add to Wish List

Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost. Please be aware that the gasket should be 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Sold as a set - Includes Bank 1 and Bank 2 Gaskets Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLX gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

Eccentric Shaft Replacement Kit - N55/S55

10X Entries Into Our F80 M3 Sweepstakes

T#:21735862

Part#: CAMGSKTN55S55KT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

Oil Filter Housing Gasket Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744018

Part#: 11427537293-KT

In Stock

$ 192.99 USD

Add to Wish List

Qty

$ 192.99 USD

Add to Wish List

If you have a leaking oil filter housing seal why not replace it while doing a oil service also and save down time on you car. The kit incudes a Oil service kit along with oil filter housing gasket, thermostat housing gasket.

Show More Show Less

Oil Cooler thermostat replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41391173

Part#: 11428637820TKT

In Stock

$ 311.99

This product was last offered at the strikethrough price on
09-01-2026

$ 307.99 USD

Add to Wish List

Qty

$ 307.99 USD

Add to Wish List

BMW’s legendary turbocharged inline-6 engines demand consistent cooling to perform at their best. With the Oil Cooler Thermostat Replacement Kit - N54, N55, BMW enthusiasts can enjoy more reliable oil temperature regulation and enhanced performance both on the street and the track.

Project Cars

SELECT YOUR BMW

BMW Gaskets, Gasket Sets, Seals, & O-Rings for BMW 6 Series F06 (2013+)

Sub-Categories

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

Comprehensive Valve Cover Gasket Kit - N63/S63

Athena Cut Ring Head Gasket S63/N63

Eccentric Shaft Replacement Kit - N55/S55

Oil Filter Housing Gasket Replacement Kit

Oil Cooler thermostat replacement kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results