BMW Engine Parts for BMW 6 Series F06 (2013+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
MMX Performance - Corporate Logo
T#:32980553
Part#: MMR03-0506
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up
There's no avoiding it, your engine's contact surfaces wear a tiny amount each time it runs. So, it becomes inevitable that tiny ferrous particles become suspended in the oil. They quickly make their way around your engine via the oil system for thousands of miles traveling over sensitive components such as your crankshaft bearings or camshaft caps, slowly contributing to increased engine wear. Our magnetic sump plug has a large surface area magnetic end, which helps to catch metal particles. And of course, the harder your engine works, the greater the risk of this nasty metallic debris, meaning the greater the benefit of using our magnetic sump plug. The MMX Performance magnetic sump plug is crafted from T6-6061 lightweight aluminum and is anodized in our trademark gloss black finish. It's supplied with a set of 5 sealing washers included (additional packs of washers can be ordered). Insist on an MMX magnetic sump plug at your next service! Full OE plug replacement. M18 x 1.5 fitment. Protect and increase engine lifespan. Crafted from T6-6061 lightweight aluminum. Anodized in our trademark gloss black finish. Supplied with a set of 5 sealing washers.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:5309585
Part#: IRPCBC-55
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping
Prevent your crank bolt from spinning with IRP's N55/S55 engine bolt fixture. As the spinning of the crank bolt has been a known issue for both the N55 and S55 motors, this is a must have to ensure that your engine stays in working condition! Features: Composed of lightweight billet aluminum Includes crank bolt capture and 8 fasteners
Show More Show Less

MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 2 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 2 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less
MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
Ships in 2 Business Days
$ 1,227.99 USD
Free Shipping
$ 1,227.99 USD
Free Shipping
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less

MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Special Order: No Guaranteed ETA
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less
MMX Performance - Corporate Logo
T#:4552049
Part#: MMR03-0502-KP
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less
MMX Performance - Corporate Logo
T#:5269482
Part#: MMR03-0502BL
Special Order: No Guaranteed ETA
$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less


Fuel-It! - Corporate Logo
T#:26038542
Part#: BMW-EPI-950
Ships on Oct 7, 2026
$ 1,188.00 USD
Free Shipping on orders $49 and up

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less
Fuel-It! - Corporate Logo
T#:403363
Part#: FIEPIK4
Back Ordered
Starting at $ 1,688.99 USD
Free Shipping
Starting at $ 1,688.99 USD
Free Shipping

Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?

Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.

What is port injection?

Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of.  It's a relatively easy system to install and does not require any permanent modification to your car.

Port injection kits are offered in five different packages to meet your needs:

Base port injection kit: (included in Bronze, Silver or Platinum Kits)

  • Fuel-It! custom black anodized spacer for the intake manifold
  • Fuel-It! custom black anodized fuel rail
  • Black anodized aluminum and stainless steel hardware
  • Dual fuel supply port for those that are running inlets in the stock location (email us for info)
  • Optional return port for those that will be running an upgraded fuel pressure regulator 
  • Six of the following:
    • Flow matched Bosch injectors (52#)
    • Extended length steel bolts for mounting your new spacer 
    • BMW OEM gaskets

Bronze kit includes:

  • Base port injection kit
  • Basic fuel line connection kit
    • Two custom Fuel-It! fittings to maintain your stock fuel line connections at the HPFP and the feed line as it enters the engine bay
    • -6an (3/8") upgraded fuel lines
    • High flow custom Fuel-It! "Y" adapter
    • -6an fuel rail connection

Silver kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line

Platinum kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line​
  • Integrated ethanol sensor​
  • Bluetooth and JB4 compatible ethanol analyzer
    • JB4 integration compatible 0-5volt
    • Bluetooth (iPhone or Android app must be purchased to use this feature)

*These kits are available for off-road use only

*All port injection kits are built to order.

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.

Show More Show Less
MMX Performance - Corporate Logo
T#:48608191
Part#: MMR03-0004
Ships in 5 Business Days
$ 40.00 USD
Free Shipping
$ 40.00 USD
Free Shipping
The MMX Billet Air Conditioning Cap Set replaces cheap OEM pieces with durable aluminum replacements that withstand track thermal cycles and everyday driving.

MMX Performance - Corporate Logo
T#:5269479
Part#: MMR03-0502GBL
Special Order: No Guaranteed ETA
$ 111.99 USD
Free Shipping on orders $49 and up
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. Includes billet adaptor which is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

MMX Performance - Corporate Logo
T#:5269476
Part#: MMR03-0502KBL
Special Order: No Guaranteed ETA
$ 25.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less
MMX Performance - Corporate Logo
T#:33379624
Part#: 634642
Special Order: No Guaranteed ETA
$ 77.99 USD
Free Shipping on orders $49 and up
Billet Washer Bottle Cap for BMW F series By MMX