BMW Engine Parts for BMW 6 Series F06 (2013+)

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

N54/N55 Low Temp Oil Thermostat Kit - 70c

10X Entries Into Our F80 M3 Sweepstakes

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

Ultimate Turbo Coolant Line Kit - BMW F01/02 F07/10 F06/12/13 N63 4.4...

10X Entries Into Our F80 M3 Sweepstakes

T#:21702986

Part#: F0XF1XCOOLANTKT

In Stock

Sale - Save 23% $ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD

Add to Wish List

Qty

Sale - Save 23%

$ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD

Add to Wish List

Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

70c Low Temp Oil Thermostat Kit - N54/N55

For vehicles with a stock oil cooler

10X Entries Into Our F80 M3 Sweepstakes

T#:30031507

Part#: N54N55LTKT1

Back Ordered

Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Qty

Sale - Save 18%

$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55

10X Entries Into Our F80 M3 Sweepstakes

T#:15511870

Part#: 832123659460KT

In Stock

Sale - Save 3% $ 123.99

This product was last offered at the strikethrough price on
08-31-2026

$ 119.96 USD

Add to Wish List

Qty

Sale - Save 3%

$ 123.99

This product was last offered at the strikethrough price on
08-31-2026

$ 119.96 USD

Add to Wish List

This oil change kit has everything you need for an easy oil change, including seven liters of oil, an oil filter, and a drain plug.

Top-Tier BMW N54/N55 Ignition Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:21670137

Part#: TMSN5SPCOILKT

In Stock

Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Qty

Sale - Save 13%

$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Upgrade your BMW N54 and N55 engine with Packaged by Turner kits for optimized performance and fuel efficiency. Our BMW ignition coils feature specialized modifications to boost firepower, delivering increased torque at lower RPMs and more horsepower at higher RPMs. The extent of improvement depends on your engine's current condition, but you'll undoubtedly experience a noticeable difference in performance. Ensure your BMW's engine runs smoothly and efficiently with our comprehensive ignition service kit from ECS Tuning. This kit includes six Bav Auto ignition coils with plug boots, NGK spark plugs, American Grease Stick dielectric grease, and a BMW spark plug service indicator label. Rest assured with a 2-year warranty on all Bavarian Autosport brand parts. Upgrade your BMW N54 and N55 engine's ignition system today for a remarkable driving experience.

Show More Show Less

Liqui Moly Longtime High Tech Oil Change Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644259

Part#: 07119963129-KT

In Stock

Sale - Save 6% $ 115.98

This product was last offered at the strikethrough price on
08-31-2026

$ 108.63 USD

Add to Wish List

Qty

Sale - Save 6%

$ 115.98

This product was last offered at the strikethrough price on
08-31-2026

$ 108.63 USD

Add to Wish List

To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Seven Liters of Liqui Moly Longtime High Tech Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)

Show More Show Less

Turbo Oil Line Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:16175681

Part#: 114275770100KT

Ships in 2 Business Days

$ 775.99 USD

Add to Wish List

Qty

$ 775.99 USD

Add to Wish List

Replace leaking or damaged lines to ensure your turbos are well lubricated for long lasting life!

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F07/10 F06/12/...

For vehicles with dynamic or adaptive drive

10X Entries Into Our F80 M3 Sweepstakes

T#:23482929

Part#: 8PK1478TKT

Ships on Nov 12, 2026

Sale - Save 23% $ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Qty

Sale - Save 23%

$ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and new pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Comprehensive Valve Cover Gasket Kit - N63/S63

10X Entries Into Our F80 M3 Sweepstakes

T#:30164665

Part#: 11128648131KT2

Ships in 1-2 days

$ 169.99

This product was last offered at the strikethrough price on
09-01-2026

$ 146.00 USD

Add to Wish List

Qty

$ 146.00 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set - Left & Right High Pressure Fuel Pump Gasket (2) O-Ring Seals (6) Torx Screws (6) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Ignition Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677540

Part#: 12138616153-KT

In Stock

$ 240.99

This product was last offered at the strikethrough price on
07-27-2026

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Coils with locks 6 spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease

Show More Show Less

Liqui Moly Special Tec LL Oil Change Kit / Inspection I

10X Entries Into Our F80 M3 Sweepstakes

T#:15644277

Part#: 071199631290KT

In Stock

Sale - Save 7% $ 109.06

This product was last offered at the strikethrough price on
08-31-2026

$ 101.96 USD

Add to Wish List

Qty

Sale - Save 7%

$ 109.06

This product was last offered at the strikethrough price on
08-31-2026

$ 101.96 USD

Add to Wish List

To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344808

Part#: N54OFHGKT

In Stock

$ 171.99

This product was last offered at the strikethrough price on
08-18-2026

$ 171.14 USD

Add to Wish List

Qty

$ 171.14 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

WPC-Treated Performance Rod Bearing Service Kit - N63 / S63

10X Entries Into Our F80 M3 Sweepstakes

T#:36066266

Part#: 11247617338KT2

In Stock

$ 1,089.99 USD

Add to Wish List

Qty

$ 1,089.99 USD

Add to Wish List

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) Hardware for Oil Pan & Oil Sump Oil filter Liqui-Moly Molygen 5W-40 (6L) Drain Plug Turner Motorsport Oil Reminder Sticker Oil pan gasket RedLine assembly lube (4 oz.)

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

In Stock

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Oct 6, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Eccentric Shaft Replacement Kit - N55/S55

10X Entries Into Our F80 M3 Sweepstakes

T#:21735862

Part#: CAMGSKTN55S55KT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

Eccentric Shaft Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:22789670

Part#: S55SHAFTRPCKT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

Camshaft
Eccentric Shaft Bearing
Valve Cover Gasket Set
Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

Show More Show Less

Timing Chain Kit - N63TU

10X Entries Into Our F80 M3 Sweepstakes

T#:41661222

Part#: 11317594899TKT

Ships in 1-2 days

Sale - Save 3% $ 849.96

This product was last offered at the strikethrough price on
08-07-2026

$ 825.28 USD

Add to Wish List

Qty

Sale - Save 3%

$ 849.96

This product was last offered at the strikethrough price on
08-07-2026

$ 825.28 USD

Add to Wish List

Timing Chain Kit for BMW N63 Engines offers a reliable solution for restoring proper timing and engine performance. This kit includes high-quality components engineered to meet or exceed OEM standards, ensuring long-lasting durability and precise fitment for all BMW N63 applications.

Show More Show Less

N63 Timing Chain Kit

For Vehicles Produced Between 2009-2013

10X Entries Into Our F80 M3 Sweepstakes

T#:41863702

Part#: 11317594899T1KT

Back Ordered

Sale - Save 19% $ 787.68

This product was last offered at the strikethrough price on
05-03-2026

$ 639.48 USD

Add to Wish List

Qty

Sale - Save 19%

$ 787.68

This product was last offered at the strikethrough price on
05-03-2026

$ 639.48 USD

Add to Wish List

This BMW N63 Timing Chain Kit is a must-have for proactive maintenance or full engine service, giving owners peace of mind and performance confidence. Restore your BMW’s precision and protect your investment with this high-quality, cost-effective solution.

Show More Show Less

Oil Filter Housing Gasket Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744018

Part#: 11427537293-KT

In Stock

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

If you have a leaking oil filter housing seal why not replace it while doing a oil service also and save down time on you car. The kit incudes a Oil service kit along with oil filter housing gasket, thermostat housing gasket.

Show More Show Less

Oil Cooler thermostat replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41391173

Part#: 11428637820TKT

In Stock

$ 311.99

This product was last offered at the strikethrough price on
09-01-2026

$ 307.99 USD

Add to Wish List

Qty

$ 307.99 USD

Add to Wish List

BMW’s legendary turbocharged inline-6 engines demand consistent cooling to perform at their best. With the Oil Cooler Thermostat Replacement Kit - N54, N55, BMW enthusiasts can enjoy more reliable oil temperature regulation and enhanced performance both on the street and the track.

Show More Show Less

Oil Drain Plug

10X Entries Into Our F80 M3 Sweepstakes

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 33% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.00 USD

Add to Wish List

Qty

Sale - Save 33%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.00 USD

Add to Wish List

Includes a one time use crush washer.

Genuine BMW Oil Change Kit / Inspection I

10X Entries Into Our F80 M3 Sweepstakes

T#:15677558

Part#: 009012ECS01-KT

In Stock

Sale - Save 3% $ 163.99

This product was last offered at the strikethrough price on
09-14-2026

$ 158.27 USD

Add to Wish List

Qty

Sale - Save 3%

$ 163.99

This product was last offered at the strikethrough price on
09-14-2026

$ 158.27 USD

Add to Wish List

To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: Seven Quarts of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit) ECS magnetic drain plug

Show More Show Less

Performance Ignition Service Kit - F1X S63

10X Entries Into Our F80 M3 Sweepstakes

T#:21966000

Part#: F1XS63MIGNTKT

In Stock

Sale - Save 5% $ 483.99

This product was last offered at the strikethrough price on
05-03-2026

$ 459.96 USD

Add to Wish List

Qty

Sale - Save 5%

$ 483.99

This product was last offered at the strikethrough price on
05-03-2026

$ 459.96 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Bosch Oxygen Sensor Set - Pre and Post Catalytic Converter - N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:55857772

Part#: 11787589475KT2

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Extreme exhaust heat and carbon buildup degrade your factory oxygen sensors over time, sending lazy data to your DME and robbing you of performance.

A/C Belt Replacement Kit With Service Tools - F Chassis

10X Entries Into Our F80 M3 Sweepstakes

T#:41661238

Part#: 11287631825TKT

In Stock

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Maintain peak performance of your BMW’s climate control system with the A/C Belt Replacement Kit With Service Tools - F Chassis, trusted by enthusiasts and technicians for its fit, quality, and ease of use.

Show More Show Less

Oil Thermostat Caps

T#:21045481

Part#: BMS-TCP

Ships in 1 Business Day

Starting at $ 29.00 USD

Add to Wish List

Starting at $ 29.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Iwis - Engine Oil Pump Chain Kit - N20, N52, N54, N55

T#:54388527

Part#: 095854200

Ships in 2 Business Days

$ 268.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.99 USD

Add to Wish List

Qty

$ 266.99 USD

Add to Wish List

In high-performance environments, oil starvation is the ultimate enemy. If you're pushing your car on the track or the street, your engine relies on absolute consistency from the oil pump.

Turbo Oil Line Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15777324

Part#: 11427577010-KT

Ships in 2 Business Days

$ 775.99 USD

Add to Wish List

Qty

$ 775.99 USD

Add to Wish List

Wastegate Actuator Refresh Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56363350

Part#: 11747626351KT2

Ships in 1-2 days

$ 266.99 USD

Add to Wish List

Qty

$ 266.99 USD

Add to Wish List

Built around OEM quality components tested to withstand severe heat cycles, the Turner Motorsport Boost Control Maintenance Kit restores precise wastegate actuation.