BMW Engine Parts for BMW 6 Series F06 (2013+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less
OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
MMX Performance - Corporate Logo
T#:32980553
Part#: MMR03-0506
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up
There's no avoiding it, your engine's contact surfaces wear a tiny amount each time it runs. So, it becomes inevitable that tiny ferrous particles become suspended in the oil. They quickly make their way around your engine via the oil system for thousands of miles traveling over sensitive components such as your crankshaft bearings or camshaft caps, slowly contributing to increased engine wear. Our magnetic sump plug has a large surface area magnetic end, which helps to catch metal particles. And of course, the harder your engine works, the greater the risk of this nasty metallic debris, meaning the greater the benefit of using our magnetic sump plug. The MMX Performance magnetic sump plug is crafted from T6-6061 lightweight aluminum and is anodized in our trademark gloss black finish. It's supplied with a set of 5 sealing washers included (additional packs of washers can be ordered). Insist on an MMX magnetic sump plug at your next service! Full OE plug replacement. M18 x 1.5 fitment. Protect and increase engine lifespan. Crafted from T6-6061 lightweight aluminum. Anodized in our trademark gloss black finish. Supplied with a set of 5 sealing washers.
Show More Show Less

MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 3 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less

Victor Reinz Crankshaft Seal - Front
For vehicles with a production date up to 02/2011
Victor Reinz - Corporate Logo
T#:374340
Part#: 11117547842
Ships in 3 Business Days
$ 35.00

This product was last offered at the strikethrough price on
04-23-2026

$ 34.00 USD
Free Shipping on orders $49 and up
$ 34.00 USD
Free Shipping on orders $49 and up
65x79x10 - Usually replaced when servicing the timing chains
Victor Reinz - Corporate Logo
T#:373815
Part#: 11617547242
Ships in 2 Business Days
$ 68.99

This product was last offered at the strikethrough price on
05-07-2026

$ 66.99 USD
Free Shipping on orders $49 and up
$ 66.99 USD
Free Shipping on orders $49 and up
1 for each intake runner 6 in total

MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 3 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less
MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
Ships in 3 Business Days
$ 1,227.99 USD
Free Shipping
$ 1,227.99 USD
Free Shipping
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less

Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs

MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Back Ordered
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less
Victor Reinz - Corporate Logo
T#:567441
Part#: 11148483798
Ships in 1-2 days
$ 96.99

This product was last offered at the strikethrough price on
05-07-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Victor Reinz - Corporate Logo
T#:377087
Part#: 11340034068
Ships in 3 Business Days
$ 54.99

This product was last offered at the strikethrough price on
05-07-2026

$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up
Seal fitted to the end of the valve


Victor Reinz Cylinder Head Bolt Set - BMW N63 S63
For vehicles with a production date up to 10/2011
Victor Reinz - Corporate Logo
T#:27672116
Part#: 11127582454
Ships in 3 Business Days
$ 55.99

This product was last offered at the strikethrough price on
05-07-2026

$ 46.99 USD
Free Shipping on orders $49 and up
$ 46.99 USD
Free Shipping on orders $49 and up
One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.
MMX Performance - Corporate Logo
T#:4552049
Part#: MMR03-0502-KP
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less
MMX Performance - Corporate Logo
T#:5269482
Part#: MMR03-0502BL
Special Order: No Guaranteed ETA
$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

Victor Reinz - Corporate Logo
T#:587721
Part#: 11427577017
In Stock
$ 10.99 USD
Free Shipping on orders $49 and up
Found on the turbocharger(s).

Victor Reinz - Corporate Logo
T#:340629
Part#: 07119963151
In Stock
$ 2.99

This product was last offered at the strikethrough price on
08-16-2026

$ 1.89 USD
Free Shipping on orders $49 and up
$ 1.89 USD
Free Shipping on orders $49 and up
Replace your oil drain plug sealing washer ever oil change to prevent the chance of oil leaks and a stained driveway.
Victor Reinz - Corporate Logo
T#:580305
Part#: B32345
Ships in 2 Business Days
$ 22.99

This product was last offered at the strikethrough price on
05-04-2026

$ 18.99 USD
Free Shipping on orders $49 and up
$ 18.99 USD
Free Shipping on orders $49 and up
If your oil filter housing is leaking oil, it is probably the gasket. Replace the faulty gasket with this Victor Reinz gasket to ensure your oil filter housing stay well sealed.

Victor Reinz - Corporate Logo
T#:593012
Part#: 13547563377
Ships in 2 Business Days
$ 11.99

This product was last offered at the strikethrough price on
08-26-2026

$ 9.99 USD
Free Shipping on orders $49 and up
$ 9.99 USD
Free Shipping on orders $49 and up
Seals the throttle body to the intake manifold
MMX Performance - Corporate Logo
T#:48608191
Part#: MMR03-0004
Ships in 6 Business Days
$ 40.00 USD
Free Shipping
$ 40.00 USD
Free Shipping
The MMX Billet Air Conditioning Cap Set replaces cheap OEM pieces with durable aluminum replacements that withstand track thermal cycles and everyday driving.

Victor Reinz - Corporate Logo
T#:386918
Part#: 11531440192
Ships in 4 Business Days
$ 4.07 USD
Free Shipping on orders $49 and up
Seals the thermostat to the water pump

MMX Performance - Corporate Logo
T#:5269479
Part#: MMR03-0502GBL
Special Order: No Guaranteed ETA
$ 111.99 USD
Free Shipping on orders $49 and up
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. Includes billet adaptor which is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less
MMX Performance - Corporate Logo
T#:5269476
Part#: MMR03-0502KBL
Special Order: No Guaranteed ETA
$ 25.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less


MMX Performance - Corporate Logo
T#:33379624
Part#: 634642
Special Order: No Guaranteed ETA
$ 77.99 USD
Free Shipping on orders $49 and up
Billet Washer Bottle Cap for BMW F series By MMX