BMW Fuel System Parts for BMW 6 Series F06 (2013+)

Vitesco Fuel Injector With Seal Ring - Index 12 - BMW N54 N63 S63 ...

T#:30629652

Part#: 13538616079

In Stock

12% off MSRP $ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 493.99 USD

Add to Wish List

Qty

12% off MSRP

$ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 493.99 USD

Add to Wish List

If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the N54 have been a common failure item, this is the most up to date injector for the N54 engine. It is highly recommended to replace older injectors also if your car is modified or you plan to modify it. Important information to consider when replacing injectors: It is recommended to replace at least 3 injectors at a time, replacing all injectors in a cylinder bank, instead of mixing and matching. If ALL injectors in a bank are index 11 or greater, injectors may be replaced individually with a new injector. If your stock injectors are index 10 or less, all 3 injectors per bank must be replaced. For V8s, all four in that bank must be replaced. Vehicles with old injector 7585261 will need to inspect their existing injectors to determine if these can be replaced individually. Replacement also requires 13537564751 for each injector.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 B58 Ethanol Content Sensor

We Price Match - Give Us A Call or Chat!

T#:29500150

Part#: 100.1037

In Stock

$ 98.99

This product was last offered at the strikethrough price on
08-24-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

BMW B46 B48 B58 Ethanol Content Sensor is a genuine Continental (VDO) Flex Fuel E85 sensor designed to accurately measure the ethanol-to-gasoline ratio in your vehicle's fuel system.

Accurate Measurement: Measures the ethanol content in fuel, providing precise data for optimal engine performance and fuel management.
Flexible Compatibility: Works with a blend of ethanol and gasoline, suitable for vehicles with appropriate fuel lines, injectors, and ECU calibration.
Quick-Connect Installation: Features quick-connect style fuel connections for easy installation in the main fuel feed line.
Integrated Fuel Analysis: All fuel passes through the sensor before reaching the fuel rail, allowing for accurate ethanol percentage readings sent to the vehicle's DME or ECU.
Standard Fittings: Both inlet and outlet connections are 3/8" SAE sized fittings for straightforward integration with existing fuel systems.

This ethanol content sensor is essential for vehicles running flex fuel, ensuring that the engine receives the correct ethanol ratio for peak performance and efficiency.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Filler Cap - Priced Each

T#:596863

Part#: 16117470341

Ships in 1-2 days

$ 35.74 USD

Add to Wish List

Qty

$ 35.74 USD

Add to Wish List

Genuine BMW Sky Blue Relay - Multiple BMWs

T#:21328

Part#: 61366915327

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Commonly used in multiple BMWs, usually controlling fuel pump operation.

3/8" Quick Disconnect Adapter With 1/8" NPT Port

T#:29500156

Part#: 200.1105

Ships in 4 Business Days

$ 24.00 USD

Add to Wish List

Qty

$ 24.00 USD

Add to Wish List

Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adaptersÂ are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate VitonÂ© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

Vitesco - Fuel Injector Replacement Kit - Index 12 - N63, S63 Engines...

T#:33479599

Part#: 13538616079VKT

In Stock

$ 4,119.99

This product was last offered at the strikethrough price on
08-17-2026

$ 4,103.99 USD

Add to Wish List

Qty

$ 4,103.99 USD

Add to Wish List

If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the have been a common failure item, this is the most up to date injector for the N63 and S63 engine.

Show More Show Less

Genuine BMW Fuel Tank Vent - E70 E71 F06 F07 F10 F12 F13 F25 N55 3.0L...

For vehivels made up to 05/2012

T#:43826

Part#: 13907636157

In Stock

5% off MSRP $ 153.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.99 USD

Add to Wish List

Qty

5% off MSRP

$ 153.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.99 USD

Add to Wish List

Genuine BMW Fuel Tank Ventilation Valve With Pipe -
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F25 X3

Fits BMW Engines including:
N55

Show More Show Less

BMW Fuel Line Upgrade - Short Line Kit

T#:29267521

Part#: 900.1025

In Stock

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

Factory fuel lines are often not designed or safe for use with ethanol based fuels. Our PTFE fuel lines are the perfect solution for installing into your vehicle without having to permanently modify your vehicle's fuel lines. Simply uninstall the factory line and install our pre-measured lines that come setup with the correct fittings for a plug-n-play install in your vehicle. Please Note: This does NOT include an ethanol Content Sensor.

Show More Show Less

Bracket Ventilation Valve

T#:43748

Part#: 13907509975

Ships in 2 Business Days

4% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Qty

4% off MSRP

$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Genuine BMW Bracket Ventilation Valve
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E82 1M Coupe,E53 48IS,E53 X5 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

Genuine BMW Decoupling Element - 13537577649

T#:42226

Part#: 13537577649

In Stock

$ 16.76 USD

Add to Wish List

Qty

$ 16.76 USD

Add to Wish List

Genuine BMW Decoupling Element -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less

Genuine BMW B38 B46 B48 B58 Gasket Ring - 13537591006

T#:42241

Part#: 13537591006

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Genuine BMW Gasket Ring -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less

Genuine BMW High Pressure Fuel Pump Mounting Bolt - M6X25-U1 - BMW N2...

T#:207714

Part#: 13517632572

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

This bolt attaches the high-pressure fuel pump to the engine's cylinder head. Any time this bolt is removed to remove or replace the high-pressure fuel pump, it should be replaced with a brand new bolt as it is a single-use bolt per BMW. This bolt comes pre-applied with thread sealant to prevent oil leaks.

Show More Show Less

Pro-Line Injector And Glow Plug Grease - 20g

10X Entries Into Our F80 M3 Sweepstakes

T#:49787695

Part#: 22243

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

ReFlex Lite Injector Harness - V8

T#:29234314

Part#: 900.1014

Ships in 4 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your V8 powered BMW! Includes x8 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!