Clickhere for SI-1 Tech Info
Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-08-2026
Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.
Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16
Fits the following BMW engines:
N55 3.0L, S65 3.0L
This product was last offered at the strikethrough price on
05-06-2026
This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).
OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,
Fits BMW Engines including:
N55
Engineered with an exclusive full-synthetic ester formula, these top-tier products are meticulously crafted to cater to various vehicles, including passenger cars, light trucks, performance vehicles, and marine applications. Offering an unparalleled level of quality, they boast an extensive range of viscosity options, ensuring the highest standards in the current market.
All sets of 12 now 10% off regular price
This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.
Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluidswere previously recommended (with the exception of some manual transmission applications, our customers report).
D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.
This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.
Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluids were previously recommended (with the exception of some manual transmission applications, our customers report).
D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.
Suitable replacement for the following BMW part numbers: BMW ATF 3 BMW ATF 3+ 83220142516 (M-1375.4) 83222152426 (M-L12108) 83220432807 83220397114 MTF-LT-3 83222289720 83222305397 ZF Lifeguard 6/6 PLUS 8 ZF6/8
This 0W-40 engine oil is ideal for BMW vehicles, offering swift flow throughout the engine for quick starts and enhanced wear protection. Its ester base lubricates engine components with precision, reducing wear and tear, while its detergents and dispersants effectively cleanse deposits, holding them until the next oil change. Specifically formulated for modern road cars and light trucks, it meets the specifications of most late-model BMW models and is also suitable for VW/Audi 500.00,502.00, 503.01, 505.00. Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards, this oil ensures top-notch performance and longevity for your BMW's engine.
All sets of 12 now 10% off regular price!
Redline lubricants are designed for modern German gasoline and diesel engines, with high detergency allowing for extended service intervals called out in your vehicle owner's manual. Unlike many other motor oils, it include the proper anti-wear additives and a low ash content, so it's compatible with the emissions equipment of modern diesel engines. It offers great wear protection, superior efficiency, and reduced friction for today's engines. This is ideal for cold weather applications where 5W30 is recommended.
Conforms to BMW LL-01 standards.
This product was last offered at the strikethrough price on
03-26-2026
This product was last offered at the strikethrough price on
03-26-2026