BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:
Dinan Iridium Spark Plug - N20 N54 N55 S55 N63 N63TU S63 S63TU
Dinan Iridium Spark Plug - N20 N54 N55 S55 N63 N63TU S63 S63TU ...
2-Steps Colder than OE plugs - For tuned, high boost, and/or upgraded turbo application...
5X Entries For Our Spin To Win Sweepstakes!
Dinan - Corporate Logo
T#:40579789
Part#: D640-0002
In Stock
New Item
$ 19.99 USD
Free Shipping
Add to Wish List
$ 19.99 USD
Free Shipping
Add to Wish List
Dinan Iridium Spark Plugs are an excellent upgrade for tuned, and even stock engines, where applicable.* Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they also are applicable to select non-tuned / stock vehicles as well!* *N54 & N55 COMPATIBILITY: Dinan plugs are numerous steps colder than stock on both the N54 (3 steps colder) and N55 (2 steps colder) and are suggested for tuned, high boost and/or upgraded turbo applications only. They are *NOT* suggested for non-tuned stock vehicles for these speciific applications. If installed on a stock N54/N55 vehicle the plug will not reach its self cleaning temperature and be unable to burn off the combustion deposits leading to fouling, misfires, and a shorter lifespan of the plug.
Show More Show Less
Dinan Double-Walled 4" Clamp-On Exhaust Tip - Polished - 2.75" Inlet
Dinan Double-Walled 4" Clamp-On Exhaust Tip - Polished - 2.75&qu...
5X Entries For Our Spin To Win Sweepstakes!
Dinan - Corporate Logo
T#:38688898
Part#: D663-0600-BOX
In Stock
New Item
$ 79.99 USD
Free Shipping
Add to Wish List
$ 79.99 USD
Free Shipping
Add to Wish List
Looking to replace old, or damaged, Dinan clamp-on tips or want to customize your exhaust setup with some Dinan flair? Look no further than our polished or black ceramic coated, straight-cut, double-walled exhaust tips that are available in a variety of tip sizes, lengths and inlet diameters! The enlarged tips with classic styling features an engraved Dinan logo on each tip. A combination that will demand attention to any passerby.
Show More Show Less
Small VTF Adjuster 100 - 105mm
Small VTF Adjuster 100 - 105mm
5X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:37925857
Part#: 860100002
In Stock
New Item
Sale - Save 5% $ 28.99
$ 27.41 USD
Free Shipping
Add to Wish List
Sale - Save 5% $ 28.99
$ 27.41 USD
Free Shipping
Add to Wish List
30mm H&R Bolt-On Wheel Spacers 14x1.25 Black (Pair)
30mm H&R Bolt-On Wheel Spacers 14x1.25 Black (Pair)
5X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:37925918
Part#: 60757254SW
Ships in 4 Business Days
New Item
Sale - Save 8% $ 229.99
$ 212.70 USD
Free Shipping
Add to Wish List
Sale - Save 8% $ 229.99
$ 212.70 USD
Free Shipping
Add to Wish List
30mm = 1.18"
5/120 bolt pattern; 72.5 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 30mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This is a DRA-type spacer - the spacer is bolted to the hub with special bolts (included). You then bolt to your wheel to the spacer with your stock wheel bolts.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 328i 335i - Sedan
Show More Show Less
H&R 5mm Wheel Spacers (Pair) Black - F30, F10 M5, F06/F13 M6, F32
H&R 5mm Wheel Spacers (Pair) Black - F30, F10 M5, F06/F13 M6, F32...
5X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:37925882
Part#: 1075726SW
Ships in 4 Business Days
New Item
Sale - Save 8% $ 99.99
$ 92.45 USD
Free Shipping
Add to Wish List
Sale - Save 8% $ 99.99
$ 92.45 USD
Free Shipping
Add to Wish List
5mm = .20"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer

H&R's 5mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 5mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result.

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2012+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe
Show More Show Less
DR Series Wheel Spacers - 20mm (1 Pair) Black
DR Series Wheel Spacers - 20mm (1 Pair) Black
5X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:37925904
Part#: 4075726SW
Ships in 4 Business Days
New Item
Sale - Save 8% $ 199.99
$ 184.95 USD
Free Shipping
Add to Wish List
Sale - Save 8% $ 199.99
$ 184.95 USD
Free Shipping
Add to Wish List
20mm = .79"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 20mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

Longer wheel bolts are required. Add them to your order from the Additional Items list below.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2012+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe
Show More Show Less
Dinan Double-Walled 4" Clamp-On Exhaust Tip - Black Ceramic - 2.75" Inlet
Dinan Double-Walled 4" Clamp-On Exhaust Tip - Black Ceramic - 2....
5X Entries For Our Spin To Win Sweepstakes!
Dinan - Corporate Logo
T#:38688899
Part#: D663-0601-BOX
Ships in 6 Business Days
New Item
$ 89.99 USD
Free Shipping
Add to Wish List
$ 89.99 USD
Free Shipping
Add to Wish List
Looking to replace old, or damaged, Dinan clamp-on tips or want to customize your exhaust setup with some Dinan flair? Look no further than our polished or black ceramic coated, straight-cut, double-walled exhaust tips that are available in a variety of tip sizes, lengths and inlet diameters! The enlarged tips with classic styling features an engraved Dinan logo on each tip. A combination that will demand attention to any passerby.
Show More Show Less
Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)
Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)
5X Entries For Our Spin To Win Sweepstakes!
Dinan - Corporate Logo
T#:38688901
Part#: D662-9228
Ships Jul 23, 2025
New Item
$ 12.99 USD
Free Shipping
Add to Wish List
$ 12.99 USD
Free Shipping
Add to Wish List
Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.
Show More Show Less
Dinan Heavy Duty Exhaust Band Clamp - 3.00" (76mm)
Dinan Heavy Duty Exhaust Band Clamp - 3.00" (76mm)
5X Entries For Our Spin To Win Sweepstakes!
Dinan - Corporate Logo
T#:38688902
Part#: D662-9237
Ships Jul 23, 2025
New Item
$ 12.99 USD
Free Shipping
Add to Wish List
$ 12.99 USD
Free Shipping
Add to Wish List
Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 76mm (3") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers