BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:3586313
Part#: REPLACEMENT-N55F
In Stock
$ 70.00 USD
Free Shipping
$ 70.00 USD
Free Shipping

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

  • Designed for N55 engines
  • Optimizes airflow for increased power
  • Improves throttle response and fuel efficiency
  • Protects engine from contaminants
Show More Show Less
Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less

BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less

Prosport Performance - Corporate Logo
T#:389617
Part#: 216EVOEOP.PSI
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Pressure Guage (0-150 PSI) 
  • Instructions
  • Mounting hardware
  • Decals
  • Premium Electric Sender 
  • Wiring harness adapter
  • Dual color display (Blue or Red)
Show More Show Less
OMP - Corporate Logo
T#:393626
Part#: OD/1958
In Stock
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Sport-inspired 3-spoke OMP Velocita Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:588633
Part#: OILVALVE-RED
Ships in 2 Business Days
$ 59.00 USD
Free Shipping
$ 59.00 USD
Free Shipping
This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA
Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 1 Business Day
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less
OMP - Corporate Logo
T#:393667
Part#: OD/2023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Classic inspired 3-spoke OMP Mugello wood steering wheel in 350mm diameter. Gloss aluminum center with OMP wooden horn button. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have 3 holes each that increase in size as they get closer to the center of the steering wheel.
Show More Show Less
OMP - Corporate Logo
T#:393794
Part#: HB/699
Ships in 4 Business Days
$ 69.00 USD
Free Shipping
$ 69.00 USD
Free Shipping
This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.
Show More Show Less


OMP - Corporate Logo
T#:393735
Part#: HC/923
Ships on Aug 19, 2026
$ 139.00 USD
Free Shipping
$ 139.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm
OMP - Corporate Logo
T#:393730
Part#: HC/733E
Ships in 10 Business Days
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.
Prosport Performance - Corporate Logo
T#:389634
Part#: 216EVOOT.F
Ships in 1 Business Day
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389626
Part#: 216EVOWGWT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less

OMP - Corporate Logo
T#:391802
Part#: OD/2012
Ships in 4 Business Days
$ 275.00 USD
Free Shipping
$ 275.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 330mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less
OMP - Corporate Logo
T#:393744
Part#: OD/1981
Ships in 4 Business Days
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

OMP - Corporate Logo
T#:393734
Part#: HC/922
Ships in 5 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm
OMP - Corporate Logo
T#:393737
Part#: HC/925
Ships in 10 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm

OMP - Corporate Logo
T#:391779
Part#: OD/1956
Ships in 10 Business Days
$ 259.00 USD
Free Shipping
$ 259.00 USD
Free Shipping
Classic inspired 3-spoke OMP Corsica Leather steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

OMP - Corporate Logo
T#:393639
Part#: OD/1979/N
Ships on Aug 6, 2026
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
Classic 3-spoke OMP WRC steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip.
Show More Show Less
OMP - Corporate Logo
T#:393727
Part#: HC/665
Ships on Aug 12, 2026
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
Sliding rail kit to be mounted between the seat mount and the seat.
OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less


Prosport Performance - Corporate Logo
T#:389613
Part#: 216EVOBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Blue or Red display
Show More Show Less
Burger Motorsports - Corporate Logo
T#:567659
Part#: JB4-F30-EWG
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
Ready to take your F chassis N55 BMW to the next level? How about up to 60hp to the wheels (80hp crank) on a completely stock car or up to 100hp to the wheels (120hp crank) on a fully modified car? The JB4 features a simple plug and play installation harness for easy installation and includes many features not found on any other tune. Including the ability to enable/disable the tuning from the drivers seat, gear dependent boost control to help with traction, autotuning for E85 mixtures, built-in diagnostic code reading/deleting, expanded engine safety systems, free firmware updates, in-dash boost gauge, the ability to control the exhaust flapper using your BC button, and much more. The JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. For more advanced enthusiasts the BMS DATA or JB4 Mobile cable allows you to connect a laptop or smartphone for additional gauges, data logging, and free firmware updates as we add new features and maps. The JB4 is a full plug and play device that installs and removes in minutes at home without special tools and unlike flash maps that permanently write over your DME with the JB4, your DME is never aware it's running more than the factory power levels. And when you're ready to change things up the JB4 is not VIN locked and can be moved to your next vehicle or resold. Made in the USA. 5 Year Warranty. Note for electronic wastegate models: the EWG add on connector remains optional and can be purchased separately from BMS's upgrades for higher HP applications where direct EWG control is beneficial such as those using an integrated WMI kit or larger turbo.
Show More Show Less
Burger Motorsports JB4 Tuner - F-Chassis N20 w/ Electronic Wastegate ...
For vehicles with electronic waste gate; not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:600105
Part#: JB4-N20EW
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 50 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA!
Show More Show Less

Prosport Performance - Corporate Logo
T#:389633
Part#: 216EVOWT.F
Ships in 1 Business Day
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or red)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389614
Part#: 216EVOWGBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Green or White display
Show More Show Less
OMP - Corporate Logo
T#:393622
Part#: OD/1951
In Stock
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
Rally inspired 2-spoke OMP Rally Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:402632
Part#: S1-N20
Ships in 2 Business Days
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
Gains of up to 35HP and 50lb/ft! This plug and play BMW tuner attaches to two easy to access sensors in the engine bay and works with your factory DME tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10 bit digital to analog converters, ensuring smooth and powerful performance! Installation is very discrete and it is quickly removed without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Stage 1 BMW Tuner Features & Benefits Improves 0-60 times and 1/4 mile times Quick Plug & Play Installation Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Not VIN locked and can be removed without a trace and resold down the road Made in the USA Not for sale or use in the state of California.
Show More Show Less
Prosport Performance - Corporate Logo
T#:587021
Part#: 216BFWAEBOSM.PSI
Ships in 1 Business Day
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

  • Accurately monitors boost pressure from 30inHg to 30 PSI
  • Stylish amber and white display for clear visibility
  • Enhances vehicle performance monitoring capabilities
  • Easy installation process
  • Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Show More Show Less

Prosport Performance - Corporate Logo
T#:389632
Part#: 216EVOVO
In Stock
$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD
Limited Qty Sale
Free Shipping
$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD
Limited Qty Sale
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Blue or red)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389622
Part#: 175CLSMARBO-R.PS
In Stock
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping

In boosted applications, it's crucial to know the amount of boost pressure you are carrying in order to optimize performance. This 45mm boost gauge from Prosport is the best way to do just that. Featuring a black face, with amber back lighting it will portray your information accurately without blinding you in the process. This guage is designed to used precision electric sensors, so you get the most accurate reading every time. 

Key Features:

  • 270 degree dial sweep
  • Track tested and race proven
  • Full gauge sweep on start up
  • Black face, red needle, amber backlit
  • 30inHg to 30PSI
  • 45mm diameter
  • Includes: Tubing kit, T-Adapter, Electric Sender, quick connect pigtail wiring, Decal and Instructions.
Show More Show Less
Prosport Performance - Corporate Logo
T#:389627
Part#: 216EVOWGOT.F
In Stock
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less
Prosport Performance - Corporate Logo
T#:584307
Part#: 216BFWAOPSM.PSI
Ships in 1 Business Day
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

  • Improves engine monitoring beyond factory gauge capabilities
  • Early detection of potential issues for preventive maintenance
  • Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
  • Compatible with BMW models for easy installation and reliable performance
  • Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:402619
Part#: JB4-F10-B
Ships on Aug 6, 2026
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: F06 F07 F10 F12 F13 N55 with Pneumatic Wastegate and harness type B
Show More Show Less
Burger Motorsports JB4 Tuner - N63 Type-A Harness - BMW F-Chassis ...
For F-Chassis Vehicles w/ Type-A Harness Only; Not for sale or use in California
Burger Motorsports - Corporate Logo
T#:600237
Part#: JB4-N63-F-A
Ships in 2 Business Days
$ 779.00 USD
Free Shipping
$ 779.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.
Show More Show Less
BBS - Corporate Logo
T#:402708
Part#: CI2102BPOKT
Ships on Aug 6, 2026
$ 3,408.99 USD
Free Shipping
$ 3,408.99 USD
Free Shipping

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Satin Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET35 - qty 4
  • Satin Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
Show More Show Less

BMC - Corporate Logo
T#:398706
Part#: FB651/20
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:402618
Part#: JB4-F10-A
Ships in 2 Business Days
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: F06 F07 F10 F12 F13 N55 with Pneumatic Wastegate and harness type A
Show More Show Less
Prosport Performance - Corporate Logo
T#:389623
Part#: 216EVOWGAFRWB4.9
Ships in 1 Business Day
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less

BMC - Corporate Logo
T#:398735
Part#: FB821/04
In Stock at Vendor
$ 130.99 USD
Free Shipping
$ 130.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Prosport Performance - Corporate Logo
T#:389625
Part#: 216EVOWGVO
Ships in 1 Business Day
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Volt Gauge (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Green or White)
Show More Show Less

Prosport Performance - Corporate Logo
T#:557080
Part#: 216CLSDWABOU-R.P
Ships in 1 Business Day
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping

Prosport Performance - Corporate Logo
T#:389624
Part#: 216EVOWGEFP.PSI
Ships in 1 Business Day
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (0-100 PSI) 
  • Instructions
  • Premium fuel sender
  • Mounting hardware
  • Decals
  • Green or white display
Show More Show Less
Prosport Performance - Corporate Logo
T#:389630
Part#: 216EVOAFRWB4.9
Ships in 1 Business Day
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less
Burger Motorsports JB4 Tuner - N63 Type-B Harness - BMW F-Chassis ...
For F-Chassis Vehicles w/ Type-B Harness Only; Not for sale or use in California
Burger Motorsports - Corporate Logo
T#:600239
Part#: JB4-N63-F-B
Ships on Aug 6, 2026
$ 679.00 USD
Free Shipping
$ 679.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.
Show More Show Less


Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
BBS - Corporate Logo
T#:5484765
Part#: LM317DBPKKT
Ships on Aug 6, 2026
$ 8,979.00 USD
Free Shipping
$ 8,979.00 USD
Free Shipping
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. 2-Piece Die Forged Aluminum Wheel - Titanium Fasteners - BBS Patented Milling inside of open spoke area - Weight optimized by FEM analysis Staggered set of BBS LM-R Diamond Black Center With Diamond Cut Lip Front - 20x9.5 ET23 72.5 CB FPS Rings Rear - 20x10.5 ET35 72.5 CB FPS Rings
Show More Show Less