BMW 5 Series F10 (2011-2016)

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

• Enhanced strength and safety
• Improved pit stop times
• Simplified wheel installation and removal
• Versatility with extended length wheel studs
• Reduced wear on hub threads
• Long-term durability and safety
• Simplified maintenance and improved efficiency

Silver 18x9.5" ET22 Concave APEX ARC-8 Wheel.

Wheel Specs

Fitment:Rear

Size:18x9.5"

Offset (mm):22

Weight (lbs):19.2

Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit other models with a specific wheel spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Satin Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x8.5 ET35 - qty 4
• Satin Black
• Center Bore: PFS
• Bolt Pattern: 5x120