BMW Maintenance & Tune-Up Parts for BMW 5 Series F10 (2011-2016)

BMW N63 S63 Ignition Service Kit includes everything needed for a comprehensive ignition service upgrade. This premium kit features high-performance black Dinan ignition coils designed to enhance the efficiency and power of your BMW engine.

• Complete kit for all essential ignition components
• Includes high-performance black Dinan ignition coils for improved spark and efficiency
• Enhances overall engine performance and responsiveness
• Easy installation for a seamless upgrade
• Designed specifically for BMW N63 and S63 engines for optimal compatibility

Elevate your BMW’s ignition system with the BMW N63 S63 Ignition Service Kit to achieve enhanced performance and reliability.

Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.

Product Benefits:

Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of four for complete BMW Cooper replacement

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

• Consistent filtering across entire filter surface
• Superior ASTMF316 filtration performance
• Magnetic Prefiltering
• Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
• Easy inspection of engine contamination
• Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

Engineered with an exclusive full-synthetic ester formula, these top-tier products are meticulously crafted to cater to various vehicles, including passenger cars, light trucks, performance vehicles, and marine applications. Offering an unparalleled level of quality, they boast an extensive range of viscosity options, ensuring the highest standards in the current market.

• Full-synthetic ester formula suitable for diverse vehicle types
• Exceptional protection, efficiency, and extended drain intervals
• Outstanding wear protection and friction reduction in varied conditions
• High detergency for increased cleanliness and prolonged drain intervals
• Enhanced fuel economy, improved ring seal, and elevated power output
• Unmatched high temperature stability and oxidation resistance for superior lubrication
• Natural high viscosity index providing a thicker oil film in crucial engine components
• Reduced evaporation, ensuring improved efficiency and ring seal
• Blended with polyol ester base stocks for multi-grade properties and enhanced lubricity
• Compatible with both conventional and synthetic motor oils
• Recommended for API SN/SM/SL/SJ/SH/SG/CF and ACEA A3/B3/B4 specifications

BMW N63 4.4L Ignition Service Kit provides everything necessary for a comprehensive ignition service upgrade, featuring high-performance red Dinan ignition coils. This kit is designed specifically for BMW vehicles with the N63 4.4L engine, ensuring optimal ignition performance and enhanced engine responsiveness. By replacing aging components with top-quality parts, this service kit improves overall engine efficiency and reliability.

• Complete Ignition Upgrade: Includes all components required for a full ignition service, ensuring optimal performance.
• High-Performance Ignition Coils: Features red Dinan ignition coils that enhance spark efficiency and improve throttle response.
• Enhanced Engine Efficiency: Promotes better fuel combustion and improved power output for a more responsive driving experience.
• Quality Components: Manufactured with premium materials for durability and long-lasting performance.
• Easy Installation: Designed for straightforward installation, suitable for both professional mechanics and DIY enthusiasts.

Upgrade your BMW’s ignition system with the BMW N63 4.4L Ignition Service Kit for superior engine performance and reliability.

High performance ignition kit for your N20 featuring Brisk 1 step colder spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Improve your BMW's engine performance with the ECS Exact-Fit High Flow Oiled Air Filter designed for S63 and S55 engines. By replacing your factory air filter with this high-flow oiled filter, you'll experience enhanced airflow, resulting in better engine breathing, increased power throughout the power band, and improved fuel economy. Unlike stock paper filters, this reusable filter offers higher flow, ensuring an immediate performance boost. Choose between oiled and dry filters, each offering unique benefits. While oiled filters provide better airflow, they require regular maintenance, including oiling after cleaning. On the other hand, dry filters offer easier maintenance without the need for oiling. Both options outperform OE paper filters and are reusable, saving you money in the long run. Key features include direct OEM fitment, higher flow than OEM filters, and reusable design, making it an ideal performance upgrade for your BMW.

Key Features:

• Direct replacement for the OEM filter
• Higher flow than OEM
• Oiled air filter
• Reusable
• Only needs cleaning every 50,000 miles under normal highway driving conditions

Be sure to check out the full line of filter cleaning supplies ECS Tuning has to offer!

* For vehicles with MAF sensors, it is important to ensure the oil has adequate time to dry before use and is not over oiled. If the oil gets up on the MAF sensor it can cause damage resulting in a check engine light.

Engine Oil (10w-60) - 1 Quart - Case Of 12 is a premium choice for performance enthusiasts, particularly popular for newer BMW M-cars such as the E46 M3 and E60 M5. This fully-synthetic ester formula is engineered for passenger cars, light trucks, and performance vehicles, providing exceptional wear protection and friction reduction across a wide range of operating conditions. With its high detergency, this engine oil allows for extended drain intervals while maintaining cleanliness.

Benefits:

• Optimal Performance: Specifically recommended for API SN/SM/SL/SJ/SH/SG/CF and ACEA A3/B3/B4 applications.
• Excellent Wear Protection: The formula reduces friction and offers superior wear protection, enhancing engine longevity.
• Extended Drain Intervals: High detergency helps maintain cleanliness and allows for longer oil change intervals.
• Improved Fuel Economy: Provides better ring seal for increased power and efficiency, contributing to fuel savings.
• High Temperature Stability: Superior oxidation resistance ensures consistent lubrication even at elevated temperatures.
• Versatile Compatibility: Fully compatible with both conventional and synthetic motor oils, making it easy to switch without issues.

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.