BMW Maintenance & Tune-Up Parts for BMW 5 Series F10 (2011-2016)

Introducing our Turner Motorsport Crank Seal Guard – the essential shield for your BMW's engine integrity. Safeguarding the heart of your vehicle, this meticulously designed guard offers robust protection for the crank seal concealed behind the harmonic balancer.

Considered an indispensable maintenance component for your BMW, the Crank Seal Guard acts as a crucial defense against a potential and preventable catastrophe involving your accessory belt. Facing the reality of potential oil or coolant leaks in your engine, this guard becomes a reliable barrier, preventing these fluids from reaching the accessory belt. The consequence of a compromised belt includes walking, slipping, fraying, and rubber particles finding their way behind the harmonic balancer and into the crank seal – a scenario that can lead to severe engine failure.

Let's be honest, engine leaks are a common occurrence, and whether your engine is currently leaking or not, the Crank Seal Guard is a proactive measure against future threats. The wear and tear on the accessory belt due to oil and coolant exposure can result in slipping, tearing, or, worst-case scenario, belt snapping – posing a significant risk to your engine's well-being.

Prepare your car for the long haul and protect the vital components, It's not a matter of "if" but "when" your belt will become a problem, and our Crank Seal Guard is your proactive solution. Rigorously tested on N52/N54/N55 and S55 for 100% confirmed fitment, it stands as a reliable guardian for your engine's health. Invest in the protection your BMW deserves with the Turner Motorsport Crank Seal Guard.

Key benefits:

Protect crank seal from rogue accessory belts and their shredded debris
Optimized to fit N52, N54, N55, and S55 engines
Rigid design that fits within the space constraints between the engine block and harmonic balancer
Zinc-coated fasteners for corrosion and oxidation resistance
Design:

Modeled and designed from FARO laser scanning and Solidworks CAD
Manufactured from 6061 billet aluminum
Turner blue anodizing
Installation:

It is a good idea to note how your belt is routed before starting the installation.

2 securing bolts for crank seal guard - Torque value of 20Nm

You will find either 6 or 8 E10 bolts are holding the harmonic balancer depending on the engine.

E10 (P#11237564511) ​
​N52: 6 bolts - Torque value of 25nm
N54: 6 bolts - Torque value of 35nm
N55: 8 bolts - Torque value of 35nm

E10 (P#11237575488)
S55: 8 Bolts - Torque value of 35nm

High performance ignition kit for your N54/N55 featuring colder stepped spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval! Included plugs are one Step colder for N55, Two step colder for N54.

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

High performance ignition kit for your N20 featuring spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Rein Transfer Case Fluid TF 0870 is designed to service your BMW xDrive transfer case, ensuring optimal performance and reliability. This genuine BMW fluid is essential for maintaining the efficiency of your transfer case, especially if you are nearing or exceeding the 60,000-mile mark. Using Rein Transfer Case Fluid TF 0870 helps to catch up on crucial maintenance and keep your vehicle running smoothly.

• Genuine BMW Fluid: Ensures compatibility and peak performance for BMW xDrive transfer cases.
• Optimal Performance: Helps maintain the efficiency of the transfer case, enhancing overall vehicle reliability.
• Preventive Maintenance: Ideal for vehicles approaching or exceeding 60,000 miles to ensure continued smooth operation.
• High-Quality Formulation: Designed to meet BMW's specifications for superior protection and longevity.

Opt for the specified synthetic fluid recommended by BMW for the hydraulic unit in your SMG transmission. As outlined in the BMW technical article from May 2008, this fluid meets the required specifications for optimal performance.

High performance ignition kit for your N20 featuring Brisk 1 step colder spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Rein Oil Filter Cap - Plastic CPL0069 is an essential component for BMW vehicles, specifically designed to ensure a secure and effective seal for the oil filter housing. This high-quality plastic cap plays a crucial role in maintaining optimal engine performance by preventing oil leaks and preserving the correct oil pressure. Ideal for both professional mechanics and DIY enthusiasts, the Rein Oil Filter Cap - Plastic CPL0069 is a vital part of regular maintenance for any BMW owner committed to vehicle longevity.

Constructed from durable plastic, this oil filter cap is engineered to withstand the high temperatures and pressures typical in BMW engines. Its precision design ensures an excellent fit, allowing for easy installation and hassle-free replacements. Available from Turner Motorsport, this product exemplifies reliability and performance for BMW enthusiasts.

Key Benefits:

• Specifically designed for BMW vehicles to ensure a perfect fit and compatibility
• Prevents oil leaks, maintaining optimal oil pressure for engine efficiency
• Made from high-quality plastic to withstand harsh engine conditions
• Easy installation process for quick maintenance and replacements
• Ideal for both professional mechanics and DIY car enthusiasts
• Available from Turner Motorsport, a trusted source for BMW parts

The Rein Oil Filter Cap - Plastic CPL0069 is a must-have for BMW owners looking to enhance their vehicle's reliability and efficiency while protecting the engine from potential damage.