BMW Suspension Parts for BMW 5 Series F10 (2011-2016)

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

• Precise response and excellent driving performance
• Springs and shocks road tested and fine-tuned to complement one another
• Bilstein Monotube/Inverted gas pressure technology
• TUV certified
• Made In Germany
• Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2011-2016 F10 BMW 535i/d

Introducing the revolutionary F10 RWD Coilovers from our latest BMW Coilover Line, meticulously engineered for the daily driver. Balancing performance, aesthetics, and comfort, these coilovers deliver a smooth and comfortable ride akin to a stock setup, yet with an aggressive look and vastly enhanced handling—all at an unbeatable price point.

Key Features:

• ECS Tuning Performance Coilover System:
  • Sport-tuned, height, damping, and body adjustable suspension
  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with progressive rate coil springs for optimal grip
  • Lowered ride height for improved handling
  • Adjustable front bodies for personalized ride height and correct spring pre-load
  • Gloss black powder-coated strut and shock bodies for durability
  • Clear zinc-coated threaded portions for corrosion protection
  • Reflex Silver Metallic powder-coated coil springs
  • Red anodized, billet aluminum lower spring seats with locking collars
  • Integrated bump stops for added stability

Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

Address weak OEM front thrust arm bushings, enhance handling and braking performance with CNC machined 6061-T6 anodized aluminum housing. Featuring a sealed OEM BMW ball joint for exceptional durability, knurled OD for a perfect press fit, and CNC machined 304ss bearing inserts for precision. Enjoy nearly instantaneous steering and braking response, maintenance-free, long-lasting performance, and improved road feel without undesirable NVH.

Bilstein combines the latest monotube shock technology with coil over engineering to deliver a supremely capable suspension for the F10 5-series.

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i

Unleash the potential of your BMW with the F10 xDrive Coilovers, meticulously crafted for the daily driver seeking an optimal blend of performance, aesthetics, and comfort. With 32 levels of damping and tailored height adjustments, these coilovers strike the perfect balance between firmness and compliance, enhancing your vehicle's look and handling prowess.

Key Features:

• ECS Tuning Performance Coilover System:
  • Sport-tuned, height, damping, and body adjustable suspension
  • 32 levels of rebound damping adjustment
  • Adjustable front sway bar end links
  • Lowering Adjustment of: 1" - 4.5"
  • Progressive rate coil springs for heat-treated durability
  • Monotube shocks/struts for road-sticking grip
  • Lowered ride height for improved handling
  • Adjustable front bodies for personalized ride height and correct spring pre-load

Product Design:

• Strut and shock bodies finished in durable gloss black powder coat
• Zinc-coated threaded portions for corrosion protection
• Reflex Silver Metallic powder-coated coil springs
• Red anodized, billet aluminum spring seats with locking collars
• Anodized adjustable sway bar end links with heavy-duty bushings
• Zinc-coated flanged nuts for shock & strut shaft pins
• E-coated rear shock adjuster housings for durability
• Zinc-coated lower spring perches
• Integrated bump stops and dust boots

Note: For vehicles without Electronic Damping (EDC/DDC or Adaptive Suspension). Vehicles with Electronic Damping will require the use of a cancellation kit to prevent error lights. (SEE ES#2966824)

Free Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

• Solve weak OEM front thrust arm bushing issues
• Sealed OEM BMW ball joint for exceptional durability
• Precision CNC machined 6061-T6 anodized aluminum housing
• Knurled OD for a perfect press fit
• CNC machined 304ss bearing inserts for precision
• Nearly instantaneous steering and braking response
• Maintenance-free, long-lasting performance
• Improved road feel without undesirable NVH

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: -1/2" (12mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2011+ F10 BMW 550i 550xi

Enhance the handling and performance of your BMW with the Turner Motorsport Performance Springs. These performance springs feature increased spring rates to reduce body roll, tighten up handling, and lower the vehicle's center of gravity without sacrificing street comfort. With reduced dive under braking and squat under acceleration, these springs provide a more controlled driving experience. Additionally, they come preset to prevent spring sag and are shot-peened for stress relief.

Key Benefits:

• Reduces body roll for improved handling
• Decreases dive under braking and squat under acceleration
• Improves grip for enhanced performance
• Lowers the vehicle's center of gravity by 1/2"
• Preset to prevent spring sag
• Shot-peened for stress relief

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F chassis M5/M6 to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Dinan M5/M6 Sway Bar Specs:
F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
R: 22mm, hollow, 3-position adjustable, urethane bushings, and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. These bars are worth 2 points towards your Dinan badge.

This item fits the following BMWs:
2012+ F10 BMW M5
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6