Cylinder Head and VANOS Tools for BMW 5 Series F10 (2011-2016)

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!

Key Features:

• Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
• Quick and Precise: File rings to exact specifications with ease.
• Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
• Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.

Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Achieve precise timing adjustments on your BMW N63TU and S63TU engines with the Schwaben N63TU/S63TU Timing Tool Set. Specifically designed for models from 2012 onwards, this all-inclusive kit is essential for accurately setting up camshaft and crankshaft timing.

Each tool is engineered to the exact standards needed for these engines, ensuring dependable and efficient performance. Conveniently packed in a blow-molded case, this set offers easy storage and portability, making it an ideal addition to any professional or home mechanic's collection.

Moreover, with our LIFETIME REPLACEMENT program, you can have peace of mind knowing that any tool from this set will be replaced if it ever fails – we've got you covered!

Replaces BMW OEM Part Numbers :

• 2249117
• 2249140
• 2249144
• 2249159
• 2249162
• 118570
• 119190

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Achieve flawless camshaft alignment on your BMW N20 and N26 engines with the Schwaben N20/N26 Timing Tool Kit. Designed to precisely align camshaft timing at the TDC position and lock the VANOS system for accurate sprocket installation, this tool set is a must-have for any timing job.

Securely stored in a durable blow-molded case, this kit is both easy to store and transport. The Schwaben N20/N26 Timing Tool Kit is a crucial addition to any professional or DIY mechanic's toolkit, ensuring the precision and dependability required for peak engine performance.

Additionally, our LIFETIME REPLACEMENT program guarantees that we will take care of any issues you may encounter with the set, so you can focus on the task at hand!

Includes:

• Camshaft Locking Tool
• Camshaft Fixating Base
• T.D.C. Alignment Pin (83300495070)
• Chain Tensioner
• M6 x P1.0 L: 130mm
• M6 x P1.0 L: 60mm
• M6 x P1.0 L: 45mm (Quantity: 2)

Other Tools Needed:

• BMW Flex Plate Lock Tool (We Suggest: T584148 - CTA N20/N26 Flywheel Holder)
• Oil Pump Lock Kit (If removing oil pump) (We Suggest: T586212 - CTA Oil Seal Repair Kit)
• 8mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 10mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 13mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 14mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 16mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 17mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 22mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 24mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 27mm Socket/Wrench (We Suggest: T361018 - 1/2" Dr. 27mm Socket)
• E6 Socket (We Suggest: T363279 - E Torx Socket Set)
• E7 Socket (We Suggest: T363279 - E Torx Socket Set)
• E8 Socket (We Suggest: T363279 - E Torx Socket Set)
• E10 Socket (We Suggest: T363279 - E Torx Socket Set)
• E20 Socket (We Suggest: T363279 - E Torx Socket Set)
• T30 Socket (We Suggest: T386445 - Torx Socket Set)
• T40 Socket (We Suggest: T386445 - Torx Socket Set)
• T45 Socket (We Suggest: T386445 - Torx Socket Set)
• 5mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)
• 8mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)

Replaces BMW OEM Tools:

• 83302212831
• 83302212830
• 83302219548
• 83300495070
• 1197340

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The BMW N47, N57 Diesel Timing Tool Kit is equipped with essential specialty tools designed for timing the N47, N47S 2.0L twin camshaft diesel engines, and N57 3.0L diesel engines found in BMW 1, 3, 5 Series, and X3 models spanning from 2007 to 2015.

This comprehensive kit includes a camshaft setting plate, flywheel locking pin, crankshaft turning tool, and a high-pressure pump sprocket retaining tool specifically crafted for pump service.

It consolidates BMW part numbers 115320, 118760, 116480, 118741, 118742, 113340, 114320, providing all the necessary components for complete timing and pump service on N47, N47S (2007-2010), and N57 (2008-2015) engines.