Search | Turner Motorsport

Rein Turbocharger Oil Line - Cylinders 1-4 (Return)

Also use: (Qty.) (1) 11 42 7 578 079 O-ring, (1) 11 42 8 624 158 Gasket. ¦ Right

2X Entries Into Our F80 M3 Sweepstakes

T#:17738385

Part#: 11427844986

In Stock

$ 70.99

This product was last offered at the strikethrough price on
04-28-2026

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Replacing both feed and return pipes together ensures optimal performance and safety levels.

N63/S63/N74 Timing Kit

For NON TU Engines

T#:641889

Part#: B119890K

Ships in 5 Business Days

$ 482.56 USD

Add to Wish List

Qty

$ 482.56 USD

Add to Wish List

Timing tool set for BMW N63 and S63 V8 engines.

High Pressure Fuel Pump Replacement Kit - N55 E Chassis

10X Entries Into Our F80 M3 Sweepstakes

T#:15644274

Part#: 13517616170KT

In Stock

$ 1,783.31

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.13 USD

Add to Wish List

Qty

$ 1,743.13 USD

Add to Wish List

This extensive kit includes a HPFP and associated gaskets to get the job done right!

Fuel Pump Lock Ring

2X Entries Into Our F80 M3 Sweepstakes

T#:8741229

Part#: 16117188565

In Stock

$ 18.19 USD

Add to Wish List

Qty

$ 18.19 USD

Add to Wish List

Fuel Pump Assembly - In-Tank Suction Device

T#:594677

Part#: 16117341301

Ships in 1 Business Day

$ 370.99

This product was last offered at the strikethrough price on
08-31-2026

$ 364.79 USD

Add to Wish List

Qty

$ 364.79 USD

Add to Wish List

Replacement Fuel Pump from Pierburg

Rein Aluminum Magnetic Oil Drain Plug - S/N63, M/N62, S/M70, M/N73, N...

2X Entries Into Our F80 M3 Sweepstakes

T#:53750214

Part#: HWU0115

Ships in 3 Business Days

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Rein Oil Drain Plug with Aluminum Construction, OE Dimensions and Threading. Upgrade Over Stock with a Magnetic tip to collect unwanted debris

Athena Cut Ring Head Gasket S63/N63

T#:26238393

Part#: ATH-HG-CR-S63-90

Ships in 3 Business Days

$ 445.99 USD

Add to Wish List

Qty

$ 445.99 USD

Add to Wish List

Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost. Please be aware that the gasket should be 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Sold as a set - Includes Bank 1 and Bank 2 Gaskets Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLX gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

URO Premium Turbocharger Coolant Supply Line - Cylinders 1-4 - F15 F1...

2X Entries Into Our F80 M3 Sweepstakes

T#:1918448

Part#: 11537578687

Ships in 1 Business Day

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Kevlar Reinforced Hose Material for Superior Burst Strength Improved Heat Shielding Added to Protect from High Radiant Heat Exposure Upgraded Metal Tee Fitting vs OEM Plastic Design Precision-formed to OE turbocharger coolant line length and shape for proper appearance and function Equipped with correct end fittings for easy installation and leak-free performance Manufactured using high-quality materials to resist coolant exposure and turbo heat

Show More Show Less

Conti Tech Rubber High-Pressure Hose

We Price Match - Give Us A Call or Chat!

T#:378830

Part#: N0202811

Ships in 3 Business Days

$ 34.22 USD

Add to Wish List

Qty

$ 34.22 USD

Add to Wish List

7mm O.D X 2.5mm I.D.

AGA Tools N63 Updated Rear Engine Cover - BMW N63 (2008-2019) ...

T#:26404835

Part#: AGA-N63-6061-URC

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

The BMW N63 rear cover is a metal plate that covers the rear of the BMW N63 V8 engine. It helps to seal the engine and prevent oil leaks. Over time, the original sealing gasket becomes brittle and does not seal, causing leaks between the engine and transmission bell housing. This repair can be very expensive and is usually misdiagnosed for a rear main seal. The AGA Updated N63 Rear Cover is an inexpensive alternative, made of 6061 billet aluminum. This kit includes the rear cover, viton o-ring, alcohol wipe, scotch-brite pad and o-ring grease. BMW Part # 11142446298 & 11148483799 BMW Service Bulletin (SIB) 11 09 16

Show More Show Less

Deluxe Compression Tester

T#:585065

Part#: OTC5605

Ships in 6 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The only way to check compression is with a compression tester like this one.

BMW Valve Cover Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15412491

Part#: 11128636546

Ships in 1 Business Day

$ 54.99

This product was last offered at the strikethrough price on
04-26-2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Valve Cover Gasket Set

2X Entries Into Our F80 M3 Sweepstakes

T#:589155

Part#: 11127582245

Ships in 1 Business Day

$ 17.49 USD

Add to Wish List

Qty

$ 17.49 USD

Add to Wish List

Mishimoto Ignition Coils, 6-Pack - BMW M54, N20, N52, N54, N55, N62, ...

T#:51075072

Part#: MMIG-BMW-0206

Ships in 3 Business Days

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

The Mishimoto Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.

Vacuum Gauge and Fuel Pump Tester

T#:5498468

Part#: 20300

Ships in 1 Business Day

$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A must have

BMW Cylinder Head Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15081510

Part#: 11127555311

Special Order: No Guaranteed ETA

$ 251.99

This product was last offered at the strikethrough price on
05-07-2026

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

Its always a good habit to replace any gasket while performing routine maintenance. Head gaskets are important pieces of the engine and if they happen to go bad and crack then that can lead to catastrophic failures. Replace these at any sign of a failure or even before to avoid issues!

Show More Show Less

Rein Timing Chain Rebuild Kit - CKP0249 SELECT PLUS for N20 Engine ...

2X Entries Into Our F80 M3 Sweepstakes

T#:34214776

Part#: 11318648732KT4

Ships in 3 Business Days

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS is a top-tier solution for BMW owners looking to enhance the performance and longevity of their engine. Available from Turner Motorsport, this premium rebuild kit is specifically engineered to address common issues such as timing chain stretch and wear, which can lead to serious engine damage if left unattended. Designed for BMW N20 engines, this comprehensive kit ensures that all critical timing components are replaced with high-quality, durable parts that meet or exceed OEM standards.

The Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS includes everything needed to restore your engine’s optimal performance, from the timing chain itself to tensioners and guides. Whether you're a BMW enthusiast or a professional mechanic, this kit provides a reliable and efficient solution for ensuring long-term engine health.

Specifically designed for BMW N20 engines prone to timing chain issues
Complete rebuild kit includes timing chain, tensioner, guides, and other essential components
Helps prevent costly engine damage due to worn or stretched timing chains
Made from high-quality materials for lasting performance and durability
Meets or exceeds OEM specifications for precise fitment and reliability
Ideal for BMW engine maintenance or rebuild projects

For BMW owners seeking a trusted, all-inclusive solution for maintaining engine performance, the Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS from Turner Motorsport is the perfect choice.

Show More Show Less

URO Fuel Vapor Leak Detection Pump - BMW F07 F10 F06

2X Entries Into Our F80 M3 Sweepstakes

T#:43750224

Part#: 16137448091

Ships in 1 Business Day

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Leak detection pump tests the fuel containment system for vapor leaks to the atmosphere. A failed pump often turns on the check engine light.

BMW Fuel Injector Seal Pliers And Seal Installers

T#:641886

Part#: B130190KIT

Ships in 5 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Includes 130190, 130191 and 130280

CP Forged Piston Set - N63 - Pro-Xtreme 9.5:1

T#:26238409

Part#: CP-FPS-N63-XT-HD

Ships in 3 Business Days

$ 2,464.99 USD

Add to Wish List

Qty

$ 2,464.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Forged Pistons, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 engines. Constructed from high-strength, aircraft-grade steel, these pistons are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme Piston design is specifically engineered to handle up to 2000 horsepower, making these pistons suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each piston is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Pistons are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Includes: - Pistons - HD Wrist Pins - PVD Rings - Pins - Locks - Spec Sheet

Show More Show Less

IP High Performance Ignition Coil - N62/N63/S63

T#:24145936

Part#: IP-A122109

Ships in 5 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

The IP Coils from Ignition Projects offer a higher power amplifier built-in. This causes the coils to produce 4x more spark energy than stock coils. It also generates an ultra-fast multi-spark discharge of 10 sparks up to the highest RPM. The spark amperage is increased by 100% which accelerates the ignition and combustion processes. This is critical for forced-induction applications and has a major impact on the performance of naturally-aspirated vehicles as well. Other Features Include: Direct Plug-N-Play Handmade in the USA Patented IP Technology Two-Stage Quality Inspection Process Professional R&D with a variety of race teams 1 Year Warranty Ignition Projects is a Southern California-based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US

Show More Show Less

Turbocharger Boost Solenoid Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:31622556

Part#: 11747626350

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

BMW 08-11 N62/N63/S63 Rod Bearing Set

For vehicles with a production date up to 03/2011

T#:24876324

Part#: CR8049SV

In Stock at Vendor

27% off MSRP $ 481.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 350.99 USD

Add to Wish List

Qty

27% off MSRP

$ 481.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 350.99 USD

Add to Wish List

BM3 FlexFuel Kit - OEM Fuel Hat Location - BMW F-Series S55/N55 3.0L ...

T#:33746522

Part#: BM3FFKTF55

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring!
Fully reversible/removable and back to stock without a trace in minutes
Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
All connecting points sealed with fuel safe Viton o-rings
Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
Power/CANBus 4-wire plug and play harness
- 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
- 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
Continental Flex Fuel sensor 3-wire harness
Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
-6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

Show More Show Less

Injector Hold Down Thread Repair

T#:5175681

Part#: AGA-IHDTR-K

Ships in 7 Business Days

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Don't let injector become lose ever again.

ARP Head Stud Kit - BMW N55/S55

N55 Engines must be drilled & tapped for proper installation

T#:23416542

Part#: ARP-HSK-S56-CA

Ships in 3 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578281

Part#: PURE-N55-0004KT

Ships on Nov 18, 2026

$ 3,114.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with electronic waste gate (EWG)

Show More Show Less

THINKDIAG (include 1 Free Software)

T#:2302718

Part#: 301180767

Ships in 2 Business Days

$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

Corteco Engine Mount - Left - F10

T#:593104

Part#: 22116794471

Ships in 1 Business Day

$ 110.85 USD

Add to Wish List

Qty

$ 110.85 USD

Add to Wish List

Don't settle for engine slop from worn out mounts

URO Oil Cooler - Multiple BMWs

2X Entries Into Our F80 M3 Sweepstakes

T#:588783

Part#: 11427525333

In Stock

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

Performance N55 Main Bearing Set

T#:26238415

Part#: 5150-HPMBS-N55

Ships in 3 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

ARP Head Stud Kit - N63

T#:26238387

Part#: ARP-HSK-N63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

Upgrade the performance of your BMW N63 engine with our ARP Head Stud Kits, specifically designed for the turbocharged V-8 N63 engine. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their N63 builds.

Show More Show Less

Fuel Pump Lock Ring Tool

T#:641918

Part#: 161190

Ships in 5 Business Days

$ 127.68 USD

Add to Wish List

Qty

$ 127.68 USD

Add to Wish List

Don't damage your lock ring, do it correctly with this tool

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

BOSCH High-Pressure Fuel Pump - N20 N26 2.0L

T#:639092

Part#: 13517584461

In Stock

$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 406.99 USD

Add to Wish List

Qty

$ 406.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. Bosch High-Pressure Pump - This item fits the following BMW Chassis: E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26

Show More Show Less

BMW N55 S55 Ferrea High Performance Valve Kit

T#:23416508

Part#: FER-HPVK-S55-T-3

Ships in 3 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!

Show More Show Less

Dorch Engineering DS15 HPFP Upgrade - N55

For 2013+ models with OE Bosch HPFP

T#:55461367

Part#: DE-55-15A

Ships in 4 Business Days

$ 1,149.00 USD

Add to Wish List

Qty

$ 1,149.00 USD

Add to Wish List

Eliminate the fueling limits and maintain factory-level reliability with the Dorch Engineering DS15 HPFP Upgrade. This "Stage 1.5" pump replaces the successful DS1, engineered specifically to handle the flow demands of aggressive tuning

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

For vehicles with dual oil cooler lines

T#:588633

Part#: OILVALVE-RED

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

Hella Air Horn Kit

T#:592708

Part#: 3001651

Ships in 1 Business Day

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Get noticed with this air horn kit from Hella!

Piston Ring Installer

T#:1809133

Part#: W80575

Ships in 1 Business Day

$ 17.62 USD

Add to Wish List

Qty

$ 17.62 USD

Add to Wish List

Comfortable vinyl grip handles.

URO Engine Oil Pan Gasket - BMW E84 F3X F10 E89 N20 N26 2.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:32781447

Part#: 11137618512PRMK

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

When removing your oil pan, it is always a good idea to replace the gasket to ensure you don't experience leaks when the pan is re-installed. This gasket is designed specifically for the URO Premium Aluminum Oil Pan Improved profile and upgraded AEM material to eliminate leaks. Only works on URO Premium Oil Pan Limited Lifetime / Unlimited Mileage Warranty Guaranteed fitment Replaces hardened or cracking engine oil pan gaskets that allow vacuum leakage and degrade engine performance OE-style seal profile and durometer ensures proper compression seal between the engine block and oil pan High-quality seal material resists engine heat and oil degradation 24-Month Unlimited Mileage Warranty

Show More Show Less

VTT N54, N55, N20, B58 Billet Motor Mount Inserts

2X Entries Into Our F80 M3 Sweepstakes

T#:597676

Part#: VTT-INSERT-1

In Stock

$ 178.99

This product was last offered at the strikethrough price on
09-17-2026

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
09-17-2026

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.

Show More Show Less

Oil Filter Cap

2X Entries Into Our F80 M3 Sweepstakes

T#:45723148

Part#: 11427615389

Ships in 2 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The oil filter housing does far more than just hold the filter—it’s a vital piece that directs oil where it needs to go throughout the engine. With age, the housing and its gaskets can warp, crack, or leak, leading to oil loss, a messy engine bay, and even potential coolant contamination. Ignore it, and that small leak can turn into serious engine trouble. Replacing your oil filter housing delivers: * **Leak-free reliability** – Prevents oil and coolant seepage before it escalates. * **Proper flow** – Maintains clean, consistent oil circulation through the engine. * **Confidence restored** – No more puddles, no more guesswork—just dependable performance. Refresh the housing, stop the leaks, and keep your engine running strong without the worry of hidden damage.

Show More Show Less

Bosch Alternator - 210 amp - Remanufactured - $125 refundable core ch...

T#:580223

Part#: AL9449X

Ships in 1 Business Day

$ 575.99 USD

Add to Wish List

Qty

$ 575.99 USD

Add to Wish List

Snow Performance Boost Tap - N20, N55

T#:589559

Part#: SNO-40200

In Stock at Vendor

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Installs easily for an accurate boost reading every time.

King Connecting Rod Bearing Set - 0.50mm Oversized

+0.50mm

T#:26538359

Part#: CR8050SV0.5

In Stock at Vendor

14% off MSRP $ 375.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 324.99 USD

Add to Wish List

Qty

14% off MSRP

$ 375.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 324.99 USD

Add to Wish List

Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for the N63/S63 come in a full set suitable for 8 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.

Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309609

Part#: VTT-COIL-N5X-BLK

Ships in 10 Business Days

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

CTA Fuel Injector Tool Kit - N20, N54, N55

T#:584132

Part#: CTA7644

Ships in 5 Business Days

$ 294.23 USD

Add to Wish List

Qty

$ 294.23 USD

Add to Wish List

The CTA Fuel Injector Tool kit is designed to remove and install your fuel injectors. 130 180, 130 270, 130 320, 2249 115

Designed to service the following BMW platforms:

N20, N47, N54, N55, N57 and N63

Show More Show Less

Project Cars

SELECT YOUR BMW

Showing 2384 results for ""

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results