BMW Engine Parts for BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Belt - Serpentine Belt - F30,F32,F33,F34,F36,F10,F12 +
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:22239
Part#: 11287628661
In Stock
$ 37.59 USD
Free Shipping on orders $49 and up
This serpentine belt ( 8Pk 1390) drives the Air conditioning, Alternator, and power steering system for BMW's with the N55 engine. We recommend replacing the AC / Alternator / Power Steering belt every 80,000 miles.

This item fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2014+ F23 BMW M235i
2011+ F25 BMW X3 xDrive35i
2015+ F26 BMW X4 xDrive35i
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
2011+ F10 BMW 535i - NOT for cars with Dynamic Drive
2010+ F07 BMW 535i GT
2012+ F12 BMW 640i - NOT for cars with Dynamic Drive<
2013+ F06 BMW 640i Gran Coupe - NOT for cars with Dynamic Drive<
2009+ F01 BMW 740i 740li - NOT for cars with Dynamic Drive<
2011-2013 E70 BMW X5 xDrive35i
2011-2013 E71 BMW X6 xDrive35i
2014+ F15 BMW X5 xDrive35i - NOT for cars with Dynamic Drive<
2015+ F16 BMW X6 sDrive35i X6 xDrive35i - NOT for cars with Dynamic Drive<
Show More Show Less
Conti Tech AC & Alternator Accessory Belt - N20 2.0L
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:379606
Part#: 11287618848
In Stock
$ 41.81

This product was last offered at the strikethrough price on
03-17-2026

$ 20.90 USD
Free Shipping on orders $49 and up
$ 20.90 USD
Free Shipping on orders $49 and up
OEM replacement A/C & Alternator accessory belt.
Continental - Corporate Logo
T#:21686
Part#: 11377524879
Ships in 3 Business Days
$ 426.72

This product was last offered at the strikethrough price on
03-09-2026

$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping

This sensor monitors the position of the Valvetronic eccentric shaft and feeds data back to the ECU. The common issue with this sensor is that it gets contaminated with oil and fails. It doesn't give a fault code or check engine light, however. What you would notice is sluggish driving, hesitation, poor performance, jerky shifts from an automatic, and other drivability issues. These types of issues are typically diagnosed as ignition coils (which are their own issue altogether) but this sensor may also be faulty.

The eccentric shaft sensor is located at the front of the cylinder head and is only accessible with the valve cover off. It's easy to check for oil by removing the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside, or even on the valve cover itself, the sensor is likely contaminated or ready to fail. You can wipe or clean the oil from sitting inside the sensor but it will come back.

If you're planning this job make sure you have our Valve Cover Overhaul Kit, which includes a new seal for the eccentric sensor as well as the rest of the valve cover and Valvetronic gaskets. You can add the valve cover set from the options below.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Belt - Serpentine Belt - E70, E71,F06,F10,F12,F13,F15,F16
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:14483
Part#: 11287628659
Ships in 2 Business Days
$ 59.45 USD
Free Shipping on orders $49 and up
This serpentine belt ( 8Pk 1478) drives the Air conditioning, Alternator, and power steering system for BMW's with the N55 engine. We recommend replacing the AC / Alternator / Power Steering belt every 80,000 miles.

This item fits the following BMWs:
2011+ F10 BMW 535i 535i xDrive - Only for cars with Dynamic Drive
2010+ F07 BMW 535i GT, 535i xDrive GT
2012+ F12 BMW 640i 640i xDrive - Only for cars with Dynamic Drive<
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe - Only for cars with Dynamic Drive<
2009+ F01 BMW 740i 740li 740li xDrive - Only for cars with Dynamic Drive<
2011-2013 E70 BMW X5 xDrive35i
2011-2013 E71 BMW X6 xDrive35i
2014+ F15 BMW X5 xDrive35i - Only for cars with Dynamic Drive<
2015+ F16 BMW X6 sDrive35i X6 xDrive35i - Only for cars with Dynamic Drive<
Show More Show Less

5150 Autosport - Corporate Logo
T#:23416526
Part#: FER-HPVSK-N55
Ships in 3 Business Days
$ 1,049.99 USD
Free Shipping on orders $49 and up
Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.
Show More Show Less
Continental - Corporate Logo
T#:14949
Part#: 13627525015
Ships on Jan 25, 2027
$ 89.63 USD
Free Shipping on orders $49 and up
This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars.

CP-Carrillo Connecting Rod Set - N63/S63 Pro-Xtreme
For Use With Aftermarket Pistons Only!
5150 Autosport - Corporate Logo
T#:26238404
Part#: CAR-CRS-S63-XT
Ships in 3 Business Days
$ 2,899.99 USD
Free Shipping on orders $49 and up
5150 AutoSport Pro-Xtreme Connecting Rods, manufactured by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 and S63 Engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making them suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely engineered to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines.
Show More Show Less
5150 Autosport - Corporate Logo
T#:26238415
Part#: 5150-HPMBS-N55
Ships in 3 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less

5150 Autosport - Corporate Logo
T#:23416542
Part#: ARP-HSK-S56-CA
In Stock
$ 999.99 USD
Free Shipping
$ 999.99 USD
Free Shipping

5150 Autosport - Corporate Logo
T#:23416508
Part#: FER-HPVK-S55-T-3
Ships in 3 Business Days
$ 929.99 USD
Free Shipping on orders $49 and up
Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!
Show More Show Less
5150 Autosport - Corporate Logo
T#:26238393
Part#: ATH-HG-CR-S63-90
Ships in 3 Business Days
$ 445.99 USD
Free Shipping on orders $49 and up
Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost. Please be aware that the gasket should be 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Sold as a set - Includes Bank 1 and Bank 2 Gaskets Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLX gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.
Show More Show Less
5150 Autosport - Corporate Logo
T#:31755188
Part#: 5150-TBK-N55-100
Ships in 3 Business Days
$ 6,099.99 USD
$ 6,099.99 USD
The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.


5150 Autosport - Corporate Logo
T#:26238409
Part#: CP-FPS-N63-XT-HD
Ships in 3 Business Days
$ 2,464.99 USD
Free Shipping on orders $49 and up
The 5150 AutoSport Pro-Xtreme Forged Pistons, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW N63 engines. Constructed from high-strength, aircraft-grade steel, these pistons are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme Piston design is specifically engineered to handle up to 2000 horsepower, making these pistons suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each piston is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Pistons are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Includes: - Pistons - HD Wrist Pins - PVD Rings - Pins - Locks - Spec Sheet
Show More Show Less
5150 Autosport - Corporate Logo
T#:23681818
Part#: CAR-CRS-S63-XTT
Ships in 3 Business Days
$ 2,999.99 USD
Free Shipping on orders $49 and up
Tailored for exceptional performance, the Pro-Xtreme design is crafted to handle up to 2000 horsepower and 9500 RPM. Constructed from high-strength, aircraft-grade steel, these connecting rods feature a tapered small-end, allowing them to be paired with your OEM pistons.
Show More Show Less
Conti Tech Rubber High-Pressure Hose
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:378830
Part#: N0202811
Ships in 3 Business Days
$ 34.22 USD
Free Shipping on orders $49 and up
7mm O.D X 2.5mm I.D.

Continental Knock Sensor - N52
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:580193
Part#: A2C59517063
Ships in 2 Business Days
$ 152.11 USD
Free Shipping
$ 152.11 USD
Free Shipping


Genuine BMW Ping Sensor -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Continental Knock Sensor
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:580189
Part#: A2C59506615
In Stock
$ 114.24 USD
Free Shipping
$ 114.24 USD
Free Shipping
A failed knock sensor can cause major performance issues
OEM VDO Cam Adjusting Unit --
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:384393
Part#: 11377548388
Ships in 3 Business Days
$ 276.92

This product was last offered at the strikethrough price on
03-22-2026

$ 223.99 USD
Free Shipping
$ 223.99 USD
Free Shipping

An important adjustment component for the timing Valvetronic system, this part can cause poor engine performance if it fails. Replace your failed Adjusting Unit with an OEM VDO unit to restore smooth engine operation.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform

Show More Show Less

Belt - Serpentine Belt - F10 F12 E70M E71M +
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:19301
Part#: 11287631824
Ships on Dec 22, 2026
$ 21.09 USD
Free Shipping on orders $49 and up
This serpentine belt (Pk7X1647) drives the Air conditioning, Alternator, and power steering system for BMW's with the N63,N63N,S63 engines We recommend replacing the AC / Alternator / Power Steering belt every 80,000 miles.

This item fits the following BMWs:
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrivei
2013+ F06 BMW 650i Gran Coupe 650i xDrive Gran Coupe
2010+ F07 BMW 550i GT, 550i xDrive GT
2011+ F10 BMW 550i 550i xDrive
2012+ F12 BMW 650i 650i xDrive
2007-2013 E70 BMW X5 xDrive50i X5M
2008-2013 E71 BMW X6 xDrive50i X6M
2014+ F15 BMW X5 xDrive50i
2015+ F16 BMW X6 xDrive50i
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M
Show More Show Less
Continental Air Conditioner Belt - F10 F12 E70 E71 F06 F01+
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:19300
Part#: 11287631825
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
This 4Pkx803 belt drives the air conditioning compressor for the AC system on cars with the N63,N63N,S63 engines. We recommend checking your belts every 30,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

This item fits the following BMWs:
2009+ F01 BMW 740i 740li 740li xDrive 740ld xDrive 750i 750li 750i xDrive 750li xDrive 760li
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive
2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5 xDrive50i X5M
2008-2013 E71 BMW X6 xDrive35i X6 xDrive50i X6M
2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i X6 xDrive50i
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M
Show More Show Less

5150 Autosport - Corporate Logo
T#:26238416
Part#: 5150-HPRBS-N55
Ships in 3 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
5150 High Performance Coated Rod Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less

5150 Autosport - Corporate Logo
T#:36235526
Part#: 5150-TBK-S63-F10
Ships in 3 Business Days
$ 6,799.99 USD
$ 6,799.99 USD
5150 Autosport - Corporate Logo
T#:39329323
Part#: SUP-HPVK-S55-32/
Ships in 3 Business Days
$ 1,143.99 USD
Free Shipping on orders $49 and up
5150 Autosport - Corporate Logo
T#:39126861
Part#: N55CCCAM-278-272
Ships in 3 Business Days
$ 1,799.99 USD
Free Shipping on orders $49 and up
Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in the most popular enthusiast upgrade specs to ensure there is an option for whatever your power goal is. This N55 camshaft set is designed to bring your engine to the next level! Whether it's for street or track purposes, this camshaft set offers the power gains and throttle response needed to push your N55 to its limits. These camshafts are a direct fit for seamless installation and with some simple tuning can produces great power while retaining factory-like idle and driveability. Valvetronic and Dual VANOS functionality can be fully retained, or with an aftermarket throttle body, the valvetronic system can be locked open, providing even more control.
Show More Show Less


Conti Tech Crankshaft Seal - Front
For vehicles with a production date up to 02/2011
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:592740
Part#: 11117547842
Ships in 5 Business Days
$ 32.99

This product was last offered at the strikethrough price on
08-23-2026

$ 30.99 USD
Free Shipping on orders $49 and up
$ 30.99 USD
Free Shipping on orders $49 and up
65x79x10 - Usually replaced when servicing the timing chains
ARP Head Stud Kit BMW S55 Custom Age 625+
N55 Engines it is a MUST to drill and tap!
N55 Engines it is a MUST to drill and tap!
5150 Autosport - Corporate Logo
T#:41458801
Part#: ARP-HSK-S55-CA
Back Ordered
$ 899.99 USD
Free Shipping on orders $49 and up
$ 899.99 USD
Free Shipping on orders $49 and up
Upgrade your S55 with the ARP Head Stud Kit BMW S55 Custom Age 625+ and drive with confidence under pressure.