BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 5 Series F10 (2011-2016)

Our Race Inspired exhaust deletes the rear mufflers in the F10 M5 to allow more of the exhaust sound to be heard. We love our M5 but it's just too quiet so we looked at ways to get more of the stock exhaust to be heard. After evaluating the stock exhaust layout it was easy to see that removing the rear mufflers would accomplish what we wanted. But cutting the mufflers off is just the beginning. We then had to develop a set of pipes and design a set of tips that fit perfectly and also looked right at home on the M5 super sedan. And these M5 muffler delete pipes are the finished product.

Our axle-back exhaust is made from a 304 stainless steel tube in the same diameter as the stock exhaust and with mandrel bends for unimpeded flow. It fits with the stock hangers and is clamped to the stock exhaust pipes once the mufflers are cut off. And the entire installation can be done in about an hour with the exhaust on the car. With factory clamps, you can easily reinstall your stock mufflers or a set of Corsa Performance mufflers at any time. Our tips are also stainless in a perfectly proportioned 89mm (3.5" diameter). They fill out the rear bumper valence perfectly - not too small like stock and not boy-racer large. Tips are available in mirror silver or brushed aluminum..

The final result is that removing the stock mufflers really lets the M5 V8 sing! With the mufflers and flapper valves removed the sound on start-up is scintillating. The sound from the S63TU engine is robust and intoxicating - it just needs to be heard! From outside, the muffler-delete exhaust makes the car seem all the more impressive. From the burble at idle to the roar under full throttle there is little doubt that this is a proper M car. Inside the car during normal driving the sound is not changed much thanks to the Active Sound Design system. It's a little louder but not intrusive or irritating. Around town the car sounds much like stock but just a touch louder. The exhaust pops and burbles more with each downshift. On the highway at 70-80 cruising speeds it's as quiet as a muffled exhaust. We tried to get the exhaust to drone but only experienced it at low speeds in a high gear (i.e. - lugging the engine) which we normally wouldn't do.

Our Race Inspired M5 exhaust is perfect for enhancing and accentuating the stock sound. It lets more of the M5's soundtrack come through without extensive exhaust modifications. If you want to enjoy the M5's sound more, think of this as its volume knob turned up.

This item fits the following BMWs:
2012+ F10 BMW M5

Let’s face it—an N55-equipped BMW deserves to be heard. Known for its deep, unmistakable exhaust tone, the turbocharged N55 has earned a reputation among BMW enthusiasts everywhere. While full cat-back systems can prove costly, our new Muffler Delete offers a smart, budget-friendly way to unlock that sound without compromise.

Our system replaces the bulky factory rear mufflers with a free-flowing, TIG-welded stainless steel assembly that sharpens exhaust note, trims unnecessary weight, and retains an OEM-style fit and finish. Featuring 3" main sections that splice seamlessly into your factory midpipes, our exhaust provides precise adjustability and a refined, aggressive look. Slip-fit connections mate cleanly using the included sleeve clamps, allowing perfect alignment of the tips within the stock rear diffuser. 3.5" slash-cut tips finish off the exhaust, adding a motorsport-inspired visual to match your bold new exhaust tone.

Features:

TIG-welded dual 3" primary tubing seamlessly transitions to adjustable, twin slash-cut 3.5" tip sections, delivering a bold, refined appearance Straightforward cut-and-clamp installation, 100% reversible Sleeve clamps provide full adjustability for effortless alignment and precise tip positioning Utilizes factory exhaust hangers for a clean, bolt-on installation—no cutting or drilling required Product Development:

Our F10 535i Muffler Delete was designed, engineered, tested, and quality inspected by our Research and Development team. We strive for nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

Enhance your BMW f10 535i's performance and sound with the Dinan Stainless Axle-Back Exhaust featuring polished tips. Crafted by Dinan, America's premier tuning company with over 35 years of expertise in BMW modification, this Free Flow stainless exhaust is designed to maximize flow and boost power by reducing backpressure. Enjoy an aggressive tone when desired, while maintaining a pleasant and civilized sound during normal driving conditions. The system, constructed from durable 20-gauge 304 stainless steel, not only improves performance but also weighs less than the stock system.

• +6 HP @ 6600 RPM / +5 lb/ft @ 6600 RPM
• Durable 20-gauge 304 stainless steel muffler
• 3.5" polished tips for a sleek appearance
• Pleasant tone with Dinan's Tuned Resonance Chamber Technology
• Helmholtz chamber reduces drone for a comfortable driving experience
• Weight savings over the stock system
• Earns 3 points towards your Dinan badge

Choose Dinan for a total package approach to BMW enhancement. With a focus on balanced performance, Dinan preserves the original character and driving feel of your BMW. Backed by a four-year, 50,000-mile warranty, Dinan ensures that their carefully developed and tested parts deliver the quality and performance you expect. Celebrate your conversion from stock to Dinan with an exclusive trunk badge proudly displayed by BMW enthusiasts everywhere.

Dinan sport mufflers are designed to compliment the 535i and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2011+ F10 BMW 535i 535xi

Dinan sport mufflers are designed to compliment the 535i and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2011+ F10 BMW 535i 535xi