BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 5 Series F10 (2011-2016)

Our Race Inspired exhaust deletes the rear mufflers in the F10 M5 to allow more of the exhaust sound to be heard. We love our M5 but it's just too quiet so we looked at ways to get more of the stock exhaust to be heard. After evaluating the stock exhaust layout it was easy to see that removing the rear mufflers would accomplish what we wanted. But cutting the mufflers off is just the beginning. We then had to develop a set of pipes and design a set of tips that fit perfectly and also looked right at home on the M5 super sedan. And these M5 muffler delete pipes are the finished product.

Our axle-back exhaust is made from a 304 stainless steel tube in the same diameter as the stock exhaust and with mandrel bends for unimpeded flow. It fits with the stock hangers and is clamped to the stock exhaust pipes once the mufflers are cut off. And the entire installation can be done in about an hour with the exhaust on the car. With factory clamps, you can easily reinstall your stock mufflers or a set of Corsa Performance mufflers at any time. Our tips are also stainless in a perfectly proportioned 89mm (3.5" diameter). They fill out the rear bumper valence perfectly - not too small like stock and not boy-racer large. Tips are available in mirror silver or brushed aluminum..

The final result is that removing the stock mufflers really lets the M5 V8 sing! With the mufflers and flapper valves removed the sound on start-up is scintillating. The sound from the S63TU engine is robust and intoxicating - it just needs to be heard! From outside, the muffler-delete exhaust makes the car seem all the more impressive. From the burble at idle to the roar under full throttle there is little doubt that this is a proper M car. Inside the car during normal driving the sound is not changed much thanks to the Active Sound Design system. It's a little louder but not intrusive or irritating. Around town the car sounds much like stock but just a touch louder. The exhaust pops and burbles more with each downshift. On the highway at 70-80 cruising speeds it's as quiet as a muffled exhaust. We tried to get the exhaust to drone but only experienced it at low speeds in a high gear (i.e. - lugging the engine) which we normally wouldn't do.

Our Race Inspired M5 exhaust is perfect for enhancing and accentuating the stock sound. It lets more of the M5's soundtrack come through without extensive exhaust modifications. If you want to enjoy the M5's sound more, think of this as its volume knob turned up.

This item fits the following BMWs:
2012+ F10 BMW M5

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

• Enhanced Appearance: Mirror finish provides a polished, high-end look.
• Durable Construction: Double-wall design for long-lasting performance.
• Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
• Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
• Easy Installation: Designed for straightforward installation on compatible vehicles.

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 4 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp