As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions
Show More Show Less
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less
The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing truly amazing exhaust system that offers more power, weighs less, and has an EC type-approval stamp at the same time. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Carbon-fibre tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The Akrapovic system includes muffler valves for both outlets (the stock system only uses one on the driver side). A valve controller and wiring harness are included to operate both valves from the stock wiring. This allows you to preserve the stock operation of the valves in Comfort, Sport, and Sport+ modes.
Show More Show Less
Akrapovic doesn't disappoint in the sound and engineering of the F87 M2 Competition Evolution exhaust. True to form, their cat-back system sounds exotic and beastly. It's a European supercar sound instead of American muscle. The Akrapovic Evolution exhaust is a high-flowing exhaust system, eliminating restriction from the mid-pipes to the rear muffler. The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The mid-pipes and rear muffler are made from ultra-lightweight titanium with titanium tips. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Titanium tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovi? R&D department, which is responsible for developing truly amazing exhaust system that offer more power, weighs less, and have an EC type-approval stamp at the same time.
Show More Show Less