BMW 6 Series F12 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

MMX Performance - Corporate Logo
T#:22723756
Part#: MMR03-0504
Ships in 3 Business Days
$ 37.99 USD
Free Shipping on orders $49 and up
$ 37.99 USD
Free Shipping on orders $49 and up
MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less
MMX Performance - Corporate Logo
T#:32980553
Part#: MMR03-0506
Ships in 3 Business Days
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
There's no avoiding it, your engine's contact surfaces wear a tiny amount each time it runs. So, it becomes inevitable that tiny ferrous particles become suspended in the oil. They quickly make their way around your engine via the oil system for thousands of miles traveling over sensitive components such as your crankshaft bearings or camshaft caps, slowly contributing to increased engine wear. Our magnetic sump plug has a large surface area magnetic end, which helps to catch metal particles. And of course, the harder your engine works, the greater the risk of this nasty metallic debris, meaning the greater the benefit of using our magnetic sump plug. The MMX Performance magnetic sump plug is crafted from T6-6061 lightweight aluminum and is anodized in our trademark gloss black finish. It's supplied with a set of 5 sealing washers included (additional packs of washers can be ordered). Insist on an MMX magnetic sump plug at your next service! Full OE plug replacement. M18 x 1.5 fitment. Protect and increase engine lifespan. Crafted from T6-6061 lightweight aluminum. Anodized in our trademark gloss black finish. Supplied with a set of 5 sealing washers.
Show More Show Less

MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 3 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less

MMX Performance - Corporate Logo
T#:13332215
Part#: MMR03-1501
Ships on Oct 30, 2026
$ 136.99 USD
Free Shipping on orders $49 and up
MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 3 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less

GSP North America - Corporate Logo
T#:1196237
Part#: 270010
Ships in 3 Business Days
$ 115.99 USD
Free Shipping
$ 115.99 USD
Free Shipping
Replace your worn wheel hub assembly with this assembly
MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Ships in 3 Business Days
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
Ships on Dec 3, 2026
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less

MMX Performance - Corporate Logo
T#:29002094
Part#: MMR03-1502
Ships in 3 Business Days
$ 127.99 USD
Free Shipping on orders $49 and up
The MMX Performance 90mm billet coolant expansion cap for BMWs has been designed from the ground up in the UK, from a solid piece of billet aluminum. Each cap was designed to directly replace the OE cap, not merely stuck in place. Fitment is for models with the matching OE (17 11 7 639 021) part number.
Show More Show Less
GSP North America - Corporate Logo
T#:389689
Part#: 273225
Ships in 3 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
$ 59.99 USD
Free Shipping on orders $49 and up

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

1997-2003 E39 BMW 525i 528i 530i 540i M5 
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i

Show More Show Less
Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
In Stock
$ 229.99 USD
Free Shipping on orders $49 and up

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less


MMX Billet Aluminum Gear Shift Paddle Set - F-Chassis(Titanium Silver...
For Automatic/DCT Vehicles with Gen 1 and 2 Performance Wheels
MMX Performance - Corporate Logo
T#:4510783
Part#: MMR04-0501-TI
Ships in 4 Business Days
$ 283.99 USD
Free Shipping
$ 283.99 USD
Free Shipping
Performance Billet Aluminum Paddle Shifter set for your F-Chassis produced by MMR Performance. Features: Aircraft Grade T-6061 Aluminum Billet Titanium Silver finish Body molding designed for the M Performance Wheel and Gen 1&2 Performance Wheels Paddles designed to make shifting easy at any steering angle. *Available in Dark Anthracite Grey see T#4510781
Show More Show Less
MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
In Stock
$ 1,227.99 USD
Free Shipping on orders $49 and up
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less
MMX Billet Aluminum Gear Shift Paddle Set - F-Chassis(Dark Anthracite...
For Automatic/DCT Vehicles with Gen 1 and 2 Performance Wheels
MMX Performance - Corporate Logo
T#:4510781
Part#: MMR04-0501-DA
Ships in 4 Business Days
$ 283.99 USD
Free Shipping
$ 283.99 USD
Free Shipping
Performance Billet Aluminum Paddle Shifter set for your F-Chassis produced by MMX Performance. Features: Aircraft Grade T-6061 Aluminum Billet Dark Anthracite Grey finish Body molding designed for the M Performance Wheel and Gen 1&2 Performance Wheels Paddles designed to make shifting easy at any steering angle. *Available in Titanium Silver see T#4510783
Show More Show Less

MMX Magnetic Gear Shifter Paddles - Titanium Silver - BMW F & G Chass...
For models with an M Performance steering wheel only
MMX Performance - Corporate Logo
T#:34415638
Part#: MMR04-0002-TITAN
Ships in 2 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less

Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 4 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
MMX Performance - Corporate Logo
T#:4538188
Part#: MMR01-1002
Ships in 3 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Replacement performance panel air filter for your S55 or S63 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable
Show More Show Less

MMX Performance - Corporate Logo
T#:4552049
Part#: MMR03-0502-KP
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less
MMX Performance - Corporate Logo
T#:5269482
Part#: MMR03-0502BL
Special Order: No Guaranteed ETA
$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

GSP North America - Corporate Logo
T#:54388486
Part#: NCV28001K
In Stock
New Item
$ 141.99

This product was last offered at the strikethrough price on
06-24-2026

$ 129.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 141.99

This product was last offered at the strikethrough price on
06-24-2026

$ 129.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
When it comes to keeping your ultimate driving machine planted and putting power to the pavement, compromise isn't an option. Since 2004, GSP has been an industry leader in North American drivetrain technology, consistently beating the competition to market with the newest applications and broadest coverage.
Show More Show Less

MMX Magnetic Gear Shifter Paddles - Black - BMW F & G Chassis w/ M Pe...
For models with an M Performance steering wheel only
MMX Performance - Corporate Logo
T#:34415637
Part#: MMR04-0001-BLK
Ships in 4 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less
MMX Magnetic Gear Shifter Paddles - Red - BMW F & G Chassis w/ M Perf...
For models with an M Performance steering wheel only
MMX Performance - Corporate Logo
T#:34415639
Part#: MMR04-0003-RED
Ships in 3 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less
GSP North America - Corporate Logo
T#:640598
Part#: NCV27046
Ships in 4 Business Days
$ 273.99 USD
Free Shipping
$ 273.99 USD
Free Shipping
No core required


MMX Performance - Corporate Logo
T#:48608191
Part#: MMR03-0004
Ships in 8 Business Days
$ 40.00 USD
Free Shipping
$ 40.00 USD
Free Shipping
The MMX Billet Air Conditioning Cap Set replaces cheap OEM pieces with durable aluminum replacements that withstand track thermal cycles and everyday driving.
Black Forest Industries - Corporate Logo
T#:50899207
Part#: BFI-905-LUG
Ships on Oct 30, 2026
$ 4.99 USD
Free Shipping on orders $49 and up
Specifically designed for use with 10mm to 15mm wheel spacers to maintain proper thread reach.
Active Autowerke - Corporate Logo
T#:397488
Part#: 11-041
Ships in 4 Business Days
5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD
Free Shipping
5% off MSRP
$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD
Free Shipping
Active Autowerke is proud to bring you our hand made Signature S63/N63 Downpipes for the twin-turbo V8 BMW X5M, X6M, 550i, 650i, X5, X6 models. This variant includes a pair of 4.5" ultra high flow GESI catalytic converter that will NOT produce a CEL!
Show More Show Less

GSP North America - Corporate Logo
T#:640599
Part#: NCV27045
Ships in 3 Business Days
$ 258.99 USD
Free Shipping on orders $49 and up

Active Autowerke S63 N63 A-Flow Catted Downpipes
For 2014+ model years only
For 2014+ model years only
Active Autowerke - Corporate Logo
T#:51075079
Part#: 11-041A
Ships in 4 Business Days
$ 2,279.00 USD
Free Shipping
$ 2,279.00 USD
Free Shipping
For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)
Show More Show Less
Active Autowerke - Corporate Logo
T#:51075064
Part#: 11-093
Ships in 4 Business Days
$ 2,849.00 USD
Free Shipping
$ 2,849.00 USD
Free Shipping
The Active Autowerke Signature GESI Catted Downpipes offer the perfect balance of raw performance and street-legal refinement. Unlike "catless" alternatives that cause unpleasant fuel odors and dashboard error lights, this system utilizes EPA-registered GESI high-flow catalytic converters. These proprietary converters use precious metal loading technology to significantly reduce emissions, ensuring your BMW remains OBD2 compliant and "Check Engine Light" free. Designed as a direct bolt-on replacement for F-Chassis BMW X5M, X6M, and 550i/650i models, these downpipes feature cast upper stainless steel V-bands for a factory-perfect seal. Whether you are cruising or under wide-open throttle, the system maintains a sophisticated exhaust note while safely protecting both passengers and the environment from harmful fumes. Key Features: NO CEL Guarantee: Advanced GESI technology ensures no catalytic efficiency codes under normal operation. Refined Sound & Scent: Eliminates the "raw fuel" odor associated with track-only downpipes. 49-State Legal: EPA registered and fully OBD2 compliant (excludes California). Precision Fitment: Cast upper V-bands ensure a leak-free connection to the turbo housing. OEM Integration: Easily bolts on with no cutting, welding, or permanent vehicle modification required. Specifications: Construction: Heavy-duty 304 Stainless Steel Inlet Connection: Precision-cast V-Band flange Catalyst Size: 4.5-inch Ultra High Flow unit Efficiency: Reaches full efficiency in under 10 seconds from cold start Compliance: Fully OBD2 compliant (1996 and newer vehicles) Application Note: Requires VIN for fitment verification; not compatible with G-chassis N63B engines.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Oct 30, 2026
$ 4.99 USD
Free Shipping on orders $49 and up
Specifically engineered for vehicles utilizing a wheel stud conversion.
MMX Performance - Corporate Logo
T#:5269476
Part#: MMR03-0502KBL
Special Order: No Guaranteed ETA
$ 25.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less

MMX Performance - Corporate Logo
T#:4538245
Part#: MMR05-1002
Special Order: No Guaranteed ETA
$ 3,150.00 USD
Free Shipping
$ 3,150.00 USD
Free Shipping
MMX Performance's charge coolers for the S63-Powered F-Chassis M5 and M6 provide an immediate increase in cooling capability, power, and torque. The coolers possess a large tube and fin stepped core which effectively double the cooling area of the coolers and are almost 28% larger than stock. As for the tanks, they are CFD cast end tanks with internal tubulators allowing for maximum airflow. Features: 28% increase in core size per each charge cooler over OEM. Noticable temperature drop across the core, with little impact on pressure drop Anti-corrosive thermal coating Easy installation, no cutting or permanent modification required
Show More Show Less

MMX Performance - Corporate Logo
T#:5269479
Part#: MMR03-0502GBL
Special Order: No Guaranteed ETA
$ 111.99 USD
Free Shipping on orders $49 and up
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. Includes billet adaptor which is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less
MMX Performance - Corporate Logo
T#:4607170
Part#: MMR02-0401
Special Order: No Guaranteed ETA
$ 451.99 USD
Free Shipping
$ 451.99 USD
Free Shipping
MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your F-Chassis M5 or M6. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two high-flow aluminum charge pipes with CNC leak-free connections Four Silicone coupler hoses Jubilee clips Mounting bracket
Show More Show Less
MMX Performance - Corporate Logo
T#:33379624
Part#: 634642
Special Order: No Guaranteed ETA
$ 77.99 USD
Free Shipping on orders $49 and up
Billet Washer Bottle Cap for BMW F series By MMX


Akrapovic - Corporate Logo
T#:1362393
Part#: ME-BM/T/5KT
Back Ordered
$ 11,660.99 USD
Free Shipping
$ 11,660.99 USD
Free Shipping
The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing truly amazing exhaust system that offers more power, weighs less, and has an EC type-approval stamp at the same time. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Carbon-fibre tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The Akrapovic system includes muffler valves for both outlets (the stock system only uses one on the driver side). A valve controller and wiring harness are included to operate both valves from the stock wiring. This allows you to preserve the stock operation of the valves in Comfort, Sport, and Sport+ modes.
Show More Show Less
Akrapovic - Corporate Logo
T#:1362392
Part#: ME-BM/T/5KT1
Back Ordered
$ 11,620.99 USD
Free Shipping
$ 11,620.99 USD
Free Shipping
Akrapovic doesn't disappoint in the sound and engineering of the F87 M2 Competition Evolution exhaust. True to form, their cat-back system sounds exotic and beastly. It's a European supercar sound instead of American muscle. The Akrapovic Evolution exhaust is a high-flowing exhaust system, eliminating restriction from the mid-pipes to the rear muffler. The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The mid-pipes and rear muffler are made from ultra-lightweight titanium with titanium tips. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Titanium tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovi? R&D department, which is responsible for developing truly amazing exhaust system that offer more power, weighs less, and have an EC type-approval stamp at the same time.
Show More Show Less