BMW Exterior Trim, Body Parts, Aero and Styling for BMW 6 Series F12 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Keep your BMW looking fit and trim with our replacement factory or aftermarket exterior pieces. The appearance of your BMW can be a statement; with our OEM replacements, you can maintain your vehicle's looks and the function of exterior components like mirrors, window regulators, and hood dampers. To upgrade your car with aero components, updated bumpers, or full body kits, visual upgrades from M-Tech, ZHP, CSL, and more are ready to give your BMW the perfect look.

Sub-Categories

Sort By:

Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
Ships in 3 Business Days
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less
AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
Carbonio No-Drill Front License Plate Mount - North America - Most BM...
For vehicles without Adaptive Cruise Control and with M Sport Package
Carbonio - Corporate Logo
T#:599469
Part#: LPM-BMC0133-N
Ships in 3 Business Days
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:396026
Part#: UN-0001-CF
In Stock
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD
Limited Qty Sale
Free Shipping
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD
Limited Qty Sale
Free Shipping

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

  • Made from 3K plain weave carbon fiber with a UV clear coat finish
  • Compatibility with various bumpers with appropriate installation
  • Pre-installation drilling for mounting holes required
  • Vehicle-specific installation hardware not included
  • Provides a sporty appearance without excessive aggressiveness
  • Shields the bumper against speed bumps and road dips
  • Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:396090
Part#: BM-0996-300
Ships in 7 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

 

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:396094
Part#: BM-0996-475
In Stock
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

Show More Show Less

Packaged by Turner - Corporate Logo
T#:401683
Part#: 65816905133KT2
In Stock
Sale - Save 23% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Sale - Save 23%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping

The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

 

Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:396092
Part#: BM-0996-416
Ships in 7 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:396097
Part#: BM-0996-A52
Ships in 7 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:396091
Part#: BM-0996-354
Ships in 7 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:396072
Part#: BM-0213
Ships in 7 Business Days
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping

Our blackout fender trim covers will help your vehicle stand out. We developed these fender trims out 3k twill vacuumed dry carbon fiber - at only 1 mm thick, they are our simplest fender trims to install. 

Includes 3M adhesive and one pair of passenger and driver side direct replacement fender grilles. Installation involves simply using supplied adhesive to cover factory fender trims.

This product fits the following BMWs:
2012-2017 F06 M6
2012-2017 F12 M6
2012-2017 F13 M6

Show More Show Less