Oiling System for BMW 6 Series F12 (2012+)

Turner Titanium Magnetic Oil Drain Plug - Priced Each (M12x1.5) ...

T#:591153

Part#: 026698TMS01-01

In Stock

Sale - Save 25% $ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 42.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 42.74 USD

Add to Wish List

This is a must-have for ALL BMWs, and simply installs in place of your existing drain plug. With every oil change you perform on your BMW, you'll be able to inspect for metal shavings and debris. Many times, if something is going wrong on your BMW's engine, the magnetic drain plug can give you an early warning. Our championship race team uses this info all the time (Ever find a piece of a valve spring in your oil? We have!) Be sure to get one now, and make the swap next oil change!

Show More Show Less

Turner Titanium Magnetic Drain Plug - M18x1.5

T#:6366590

Part#: 008666LA01KT

Ships on Oct 21, 2026

Sale - Save 20% $ 62.99

This product was last offered at the strikethrough price on
06-14-2026

$ 50.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 62.99

This product was last offered at the strikethrough price on
06-14-2026

$ 50.39 USD

Add to Wish List

This is a must-have for ALL BMWs, and simply installs in place of your existing drain plug. With every oil change you perform on your BMW, you'll be able to inspect for metal shavings and debris. Many times, if something is going wrong on your BMW's engine, the magnetic drain plug can give you an early warning. Our championship race team uses this info all the time (Ever find a piece of a valve spring in your oil? We have!) Be sure to get one now, and make the swap next oil change!

Show More Show Less

Turner Baffled Oil Catch Can - Standard Flow 6oz

T#:38419077

Part#: 022798TMS01-01

In Stock

Sale - Save 25% $ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 164.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 164.24 USD

Add to Wish List

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

6061-T6 billet machined body, anodized black for lasting protection and appearance
Strategically positioned 4 chamber baffle system maximizes oil / air separation
Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
Sealed with a pre-installed viton O-Ring
Includes 2.5mm allen key to remove baffle plates for cleaning
Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
Optional use drain hole - drain kit included!
Universal mounting kit

Show More Show Less

Turner Baffled Oil Catch Can - Standard Flow 10oz

T#:38419079

Part#: 022798TMS01-03

In Stock

Sale - Save 25% $ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow.

Show More Show Less

Turner Baffled Oil Catch Can - Standard Flow 8oz

T#:38419062

Part#: 022798TMS01-02

Ships in 2 Business Days

Sale - Save 25% $ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 164.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 164.24 USD

Add to Wish List

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

6061-T6 billet machined body, anodized black for lasting protection and appearance
Strategically positioned 4 chamber baffle system maximizes oil / air separation
Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
Sealed with a pre-installed viton O-Ring
Includes 2.5mm allen key to remove baffle plates for cleaning
Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Show More Show Less

OEM Rein Oil Pan Bolt Set - M54 N52 N54 N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379282

Part#: 11132210959

In Stock

$ 44.69 USD

Add to Wish List

Qty

$ 44.69 USD

Add to Wish List

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Show More Show Less

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

N54/N55 Low Temp Oil Thermostat Kit - 70c

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

70c Low Temp Oil Thermostat Kit - N54/N55

For vehicles with a stock oil cooler

T#:30031507

Part#: N54N55LTKT1

Back Ordered

Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Qty

Sale - Save 18%

$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Blackline Performance Edition Blue Oil Filter Housing Cap

T#:11366500

Part#: FXXOFH-B

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Motorsport Blue Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.

Show More Show Less

Gintani Race Oil Cooler Valve - N/S63, N74

T#:26971830

Part#: GIN-001-RVC

Back Ordered

$ 170.00 USD

Add to Wish List

Qty

$ 170.00 USD

Add to Wish List

The engine oil cooler valve allows for increased flow to your engine oil heat exchanger resulting in lower running engine oil temperatures and more consistent performance.

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

FTP Motorsport Low Temp Oil Thermostat - N54/N55

T#:582222

Part#: SG84006

Ships on Sep 30, 2026

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

This thermostat will open sooner and help to lower the overall oil temperature.

BLACKLINE BMW M Car Series BLACKLINE Performance Heritage Motorsport ...

T#:53820895

Part#: S54OCCS

In Stock

$ 118.99

This product was last offered at the strikethrough price on
05-15-2026

$ 83.00 USD

Add to Wish List

Qty

$ 83.00 USD

Add to Wish List

Designed for Seamless Integration the Heritage Motorsport Oil Cap provides a Solid Aluminum Replacement for Aging Plastic units

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

T#:24344808

Part#: N54OFHGKT

In Stock

Sale - Save 4% $ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD

Add to Wish List

Qty

Sale - Save 4%

$ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships Today

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Aug 10, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 2 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Oil Filter Cap

T#:45723148

Part#: 11427615389

Ships in 3 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The oil filter housing does far more than just hold the filter—it’s a vital piece that directs oil where it needs to go throughout the engine. With age, the housing and its gaskets can warp, crack, or leak, leading to oil loss, a messy engine bay, and even potential coolant contamination. Ignore it, and that small leak can turn into serious engine trouble. Replacing your oil filter housing delivers: * **Leak-free reliability** – Prevents oil and coolant seepage before it escalates. * **Proper flow** – Maintains clean, consistent oil circulation through the engine. * **Confidence restored** – No more puddles, no more guesswork—just dependable performance. Refresh the housing, stop the leaks, and keep your engine running strong without the worry of hidden damage.

Show More Show Less

Oil Drain Plug

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Qty

Sale - Save 29%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Includes a one time use crush washer.

OEM Rein Oil Filter Cap - BMW N20 N52 N54 N55

T#:46134810

Part#: CPL0054

Ships in 8 Business Days

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Over time, has the cap for your oil filter housing become harder to remove? Using the wrong tool can round the top of the cap, making removal harder each time. Replace your old cap and seal to ensure your engine is leak-free. We recommend pairing this with the Schwaben Oil Filter Cap Tool (T#371924) to make installation and removal easier.

Show More Show Less

Rein Aluminum Magnetic Oil Drain Plug - S/N63, M/N62, S/M70, M/N73, N...

T#:53750214

Part#: HWU0115

Ships in 4 Business Days

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Rein Oil Drain Plug with Aluminum Construction, OE Dimensions and Threading. Upgrade Over Stock with a Magnetic tip to collect unwanted debris

Oil Thermostat Caps

T#:21045481

Part#: BMS-TCP

Ships in 1 Business Day

Starting at $ 29.00 USD

Add to Wish List

Starting at $ 29.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less