BMW Engine Parts for BMW 6 Series F12 (2012+)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 5 Business Days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 2 Business Days

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

In Stock

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x

T#:5309605

Part#: VTT-COIL-N5X-BLU

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

T#:5309610

Part#: VTT-COIL-N5X-RED

Ships on Aug 6, 2026

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

T#:22196341

Part#: VTTS55CLCNV

Ships in 10 Business Days

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

T#:588633

Part#: OILVALVE-RED

Ships in 3 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 6 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships on Aug 6, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 8 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships on Aug 6, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 2 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

T#:5122280

Part#: TRIPLECAPRED1

Ships on Aug 6, 2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 2 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Aug 7, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x

T#:5309609

Part#: VTT-COIL-N5X-BLK

Ships on Aug 6, 2026

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships in 1-3 days

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

T#:5122281

Part#: TRIPLECAPCLR1

Ships on Aug 6, 2026

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

T#:5122264

Part#: VTTFILTERCAPBLK

Ships on Aug 6, 2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

T#:5122279

Part#: TRIPLECAPBLK1

Ships on Aug 6, 2026

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships on Aug 6, 2026

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships on Aug 6, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

VTT N5X/S55/N2X Triple Billet Cap Kit - Blue - BMW N20/52/54/55 ...

T#:5122282

Part#: TRIPLECAPBLUE1

In Stock

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Oil Thermostat Caps

T#:21045481

Part#: BMS-TCP

Ships in 1 Business Day

Starting at $ 29.00 USD

Add to Wish List

Starting at $ 29.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

BMS Oil Catch Can - S63TU M5/M6

T#:38688932

Part#: BMSCC-S63TU

Ships on Aug 7, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

The **Burger Motorsports Oil Catch Can** is the **ultimate solution** for **S63TU BMW turbo engines**, tackling **oil control issues** like **blow-by, intake valve buildup, VANOS contamination**, and **reduced performance—especially at higher boost levels**. ### **Key Features & Benefits:** ✅ **Prevents Oil Blow-By** – Keeps the **intercooler, charge pipes, and intake valves clean** ✅ **Optimized Airflow** – Large-diameter hoses maintain **OEM PCV flow rates**, preventing pressure buildup ✅ **Precision CNC Construction** – 100% **CNC-machined, no welding**, ensuring **durability and longevity** ✅ **Fully Closed-Loop System** – No vapor leaks, maintaining **emissions compliance** ✅ **Strategic Mounting Locations** – **Shorter line runs** improve efficiency and maintain a **stealthy look** ✅ **Easy Maintenance** – Simply **unscrew the base** or use the **drain plug** for quick oil disposal ✅ **Fast 20-Minute Installation** – **All necessary hardware included** and **fully reversible** 🔧 **Built for Performance. Engineered for Longevity. Proudly Made in the USA.** 🔥

Show More Show Less

VTT Stage 1 Turbocharger Upgrade - N63/N63TU

There turbos are built to order. Please expect 4-6 weeks for delivery.

T#:11203241

Part#: VTTSTG1N63

Ships in 10 Business Days

Starting at $ 4,607.99 USD

Add to Wish List

Starting at $ 4,607.99 USD

Add to Wish List

This new rebuilt turbocharger unit utilizes Vargas Turbo's 30+ years of experience to offer a superior quality performance rebuild. Utilizing all-new internals to stock OEM specifications, the housings are carefully machined to accept custom-machined billet compressor wheels. Not only are these a superior choice for rebuilt turbos, they offer a substantial savings over OEM. Rebuilt stock turbos to handle up to 800 WHP Housings machined to accept custom-machined billet compressor wheels All-new internals to exacting stock specifications Includes $1300 refundable core charge Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost-effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

T#:51672701

Part#: VTT-EXTENDED-STU

Ships on Aug 6, 2026

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.

EWG BILLET CNC Valve Cover - Red

T#:41695014

Part#: VTTS55BILLETVCRE

Ships on Aug 6, 2026

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

Absolutely — here’s a reworded version of the product description in the ECS Tuning dialect, capturing the same details with a more engaging and enthusiast-focused tone: --- **VTT Billet CNC Valve Cover – S55/N55 EWG** Say goodbye to brittle factory plastics and elevate your engine bay with the Vargas Turbo Technologies Billet CNC Valve Cover – the ultimate solution for BMW S55 and N55 EWG owners chasing reliability, performance, and high-end style. Precision-crafted from 100% CNC-machined 6061-T6 aircraft-grade aluminum, this cover ditches the OEM failure-prone plastic for a rugged, motorsport-ready upgrade that’s built to take the heat – and the boost. ### Why It Belongs in Your Build: * **Bulletproof Construction:** Solid billet aluminum means no cracks, no leaks – just unshakable strength that outlasts stock plastic by miles. * **Performance-Minded Weight:** At only 9.7 lbs, it’s a lightweight beast – just 1.8 lbs heavier than stock, but loaded with benefits. * **Anodized Armor:** Dress your engine bay with anodized color options – choose clear, black, red, blue, or gold to match your vibe. * **Custom PCV Configs:** Kills the fragile OEM PCV setup and gives you flexibility for a clean, powerful crankcase solution – whether you're keeping it stock or running a full catch can. * **Baffled to Perfection:** Integrated baffling keeps oil where it belongs, not in your intake tract. * **All-In Kit:** Comes ready to rock with ORB plugs or banjo fittings, plus -10 silicone hose – install and go. ### Heads Up on Install: Upgrading to this billet beauty wipes out the stock PCV – and that's a good thing. But to keep your engine breathing right, you’ll need an external PCV setup to maintain crankcase vacuum at idle. Want max reliability? Block off those head ports and let this cover handle the pressure without relying on a gasket alone. ### Built for Big Power: If you're running a single turbo conversion, this is your cover. It offers cleaner lines, better heat resistance, and improved fitment where it counts. ### Customize Your Cover: * **Finish Options:** Clear, black, red, blue, or gold anodizing. * **Breather Cap Choices:** Stock-style oil cap or a VTT billet one-way breather. * **Fitting Options:** Dual -10 ORB plugs, or go hybrid with a banjo and plug. * **Titanium Hardware:** Add some flair with black, burnt, or natural finish Ti bolts. * **Catch Can Ready:** Pair with VTT’s catch can for a full crankcase solution. ### Backed by VTT: Includes a 12-month warranty for confidence on and off the track. ### Price: Starting at \$1,499.00 – premium build, race-ready features, and engine bay clout to match. --- Let me know if you want this in shorter format for a product listing, social caption, or email drop.

Show More Show Less

Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W - BMW...

T#:52129729

Part#: VTT56BSENSKIT64

Ships on Aug 6, 2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.

Vargas Billet Motor Mount Inserts - BMW N20/N54/N55

T#:51918860

Part#: VTT-INSERT-4

Ships on Aug 6, 2026

$ 434.99 USD

Add to Wish List

Qty

$ 434.99 USD

Add to Wish List

The VTT Billet Motor Mount Insert Kit is for BMW N20/N54/N55 owners who want to eliminate the excessive engine pitch and drivetrain slop.

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships on Aug 6, 2026

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

Vargas "Spine Lock" Crank Hub - BMW N55/S55

T#:51918887

Part#: VTT-NS55CHO

Ships on Aug 6, 2026

$ 819.99 USD

Add to Wish List

Qty

$ 819.99 USD

Add to Wish List

The Vargas Spline Lock Crank Hub is the solution for BMW owners seeking to push their N55 or S55 engines to the limit without the fear of catastrophic timing failure.

Vargas "Spline Lock" Crank Hub Solution - BMW N55 & S55

T#:51918889

Part#: VTT-NS55CHSCP

Ships on Aug 6, 2026

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

The VTT Spline Lock Crank Hub Solution represents a massive leap in drivetrain engineering by moving away from friction-based or pinned interfaces.

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

T#:51672717

Part#: VTT-MAP-HARNESS

Ships on Aug 6, 2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships on Aug 6, 2026

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships on Aug 6, 2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships on Aug 6, 2026

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

N55 Port Injection Kit With Intake Manifold, 950cc Injectors & Fuel L...

T#:42133542

Part#: BMW-N55-PRM-950

Back Ordered

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

VTT Stage 1 S63 Turbocharger Upgrade - F10 M5/M6

T#:390271

Part#: VTT-S63-STG1KT

Back Ordered

$ 5,499.00 USD

Add to Wish List

Qty

$ 5,499.00 USD

Add to Wish List

Vargas is among the first turbo specialists to release a Stage 1 upgrade for the S63TU V8. Using the stock housings but with improved internals, this S63 turbo upgrade is good up to 800whp. Stage 1 is a hybrid of stock and upgraded internals - a new larger higher-flow billet compressor wheel with specially machined housings for much improved flow characteristics. These are the first step in building an X5/X6 M super sled!

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. Vargas rebuilds each turbo assembly with OEM or better internals, addressing known weak points at the same time. Because the Stage 1 uses stock turbo housings, all of the stock turbo plumbing and intake hoses will match up. It's recommended that the rest of the system be upgraded to handle your tuning goals. Custom software tuning will be required to achieve the correct fuel and timing curves.

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 800. This rating is used to compare various stage of Vargas turbo kits. The number is a theoretical limit for how much power it could make. There is no advertised horsepower gain without consideration for additional tuning and upgrades. The rating is provided as a reference to use in your tuning planning.

Vargas turbos are rebuilt on an exchange basis so a core charge will apply. This will be refunded upon the return of your rebuildable original turbos.

Show More Show Less

VTT Valve Cover Gasket - BMW N54 w/ VTT VC

For vehicles with VTT Valve Cover

T#:52129724

Part#: VTT-VC-GASKET-N5

Back Ordered

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT N55/S55 replacement gasket is a high-performance sealing solution for the N55 and S55 (EWG) aluminum valve covers.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 6 Series F12 (2012+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results