Turbos for BMW 6 Series F12 (2012+)

Clear BMW chassis

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

EWG models only

T#:13957900

Part#: N55PURE500EWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The PURE500 turbo from Pure Turbos is sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

For models with a production date up to 03/2015

T#:17771605

Part#: HDN55WG

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

The early N55 turbocharger is notorious for pneumatic wastegate actuator failure, a common issue that triggers frustrating boost errors and persistent check engine lights. Because BMW does not provide this specific component as a standalone replacement, owners are often left with few official repair options. Pure Turbos solves this problem with an upgraded actuator engineered to fix the inherent weaknesses of the original equipment while simultaneously boosting the efficiency of the entire turbocharging system. One of the primary benefits of this enhanced actuator is its ability to deliver approximately 2 psi of additional boost compared to the factory unit while maintaining the same Wastegate Duty Cycle. By optimizing how exhaust gases are managed and bypassed, this component allows the engine to generate more power without requiring more effort from the electronics. This increased pressure translates directly into sharper throttle response and a noticeable jump in horsepower, making it an essential upgrade for drivers who want to restore their vehicle's reliability while enjoying a more aggressive and responsive driving experience.

Show More Show Less

ECS Performance Silicone Turbo Charger Coolant Hose Kit - S63 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:7355613

Part#: 008648LA01

In Stock

Sale - Save 25% $ 61.99

This product was last offered at the strikethrough price on
06-14-2026

$ 46.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 61.99

This product was last offered at the strikethrough price on
06-14-2026

$ 46.49 USD

Add to Wish List

Designed using durable silicone and billet aluminum to greatly outlast the OE rubber and plastic combination.

TurboSmart OPR V2 Oil Pressure Regulator

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

T#:22591972

Part#: TS-0551-1011

In Stock at Vendor

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

OEM Elring Oil Drain Port Gasket - BMW N63 S63 4.4L

2X Entries Into Our F80 M3 Sweepstakes

T#:2691327

Part#: 11428624158

In Stock

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

OEM replacement turbo oil drain line gasket - seals the turbo drain lines to the turbochargers.

Pure Turbos N63 (Non-TU) Pure Stage 1 Turbo Upgrade - BMW E70 E71 F01...

For vehicles with the earlier N63A engine - Not compatible with the N63TU engine

T#:46444178

Part#: N63STG1KT

Back Ordered

$ 3,426.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,300.00 USD

Add to Wish List

Qty

$ 3,300.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers its Stage 1 turbo upgrade package for those looking to reliably increase power to 650+whp with supporting modifications.

Show More Show Less

Pure Turbos N63 Pure Stage 2 Turbo Upgrade - BMW E70 E71 F01/02 F06/1...

For vehicles with the earlier N63A engine - Not compatible with the N63TU engine

T#:46478564

Part#: N63STG2KT

Ships in 4 Business Days

$ 4,977.99

This product was last offered at the strikethrough price on
07-13-2026

$ 4,795.00 USD

Add to Wish List

Qty

$ 4,795.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers their Stage 2 turbo upgrade package for those looking to reliably increase power to 850+ whp with supporting modifications.

Show More Show Less

Elring Turbocharger Mounting Kit - BMW E82/88 E9X F22/23 F3X F07/10 F...

2X Entries Into Our F80 M3 Sweepstakes

T#:44733225

Part#: 648.550

Special Order: No Guaranteed ETA

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

If you are replacing your N55's turbocharger, it is advisable to replace the mounting hardware and gaskets as well. This Elring kit includes the Exhaust Manifold Gaskets, Turbo Downpipe Gasket, Flange Nuts, Threaded Studs, and O-Ring Seals needed when replacing the N55 turbo

Show More Show Less

Elring Turbo Oil Drain Gasket - BMW N20 N55 S55 B46/B48 B57

2X Entries Into Our F80 M3 Sweepstakes

T#:44733246

Part#: 876.070

Special Order: No Guaranteed ETA

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

If your turbo oil drain line connection is leaking, this gasket is likely the culprit. Replace your old gasket with this brand new gasket from Elring to eliminate oil leaks, prevent oil loss, and keep both your engine and driveway clean.

Show More Show Less

Select Vehicle

Purpose

Category

Turbos

Brand

View All Brands

Price

Special Offers

On Sale (1)

Shipping