BMW Intake Parts for BMW 6 Series F12 (2012+)

Replacement N55 Performance Filter, No Hardware

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

Performance Intake System - F10/11/07 5 Series, F12/13/06 6 Series, E...

T#:20979733

Part#: F10-N55-INT

In Stock

Starting at $ 219.00 USD

Add to Wish List

Starting at $ 219.00 USD

Add to Wish List

In BMWs with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

Adds up to 10+ Horsepower
Dramatic sound improvement
Super fast install and removal
Improves throttle response
Retains OEM airbox base as a heat shield
Retains OEM cold air ducting
Looks great under the hood
Cleanable and reusable filter
Made in the USA

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"...

T#:28968878

Part#: 1123BMS

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less

BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6

T#:398705

Part#: FB647/20

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Replacement N55 Performance Filter - Red (No Hardware)

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

Crank Case Vent Hose Kit - S63 4.4L Engine

T#:23913949

Part#: CRNKVENTKITKT

In Stock

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

Elevate your S63 4.4L engine's capabilities with our meticulously designed Crank Case Vent Hose Kit. Crafted from premium-grade materials, this kit ensures superior ventilation, mitigating pressure accumulation within the engine, thereby enhancing its overall performance.

Engineered to precise specifications, our kit seamlessly replaces the OEM vent hoses, guaranteeing a perfect fit. By reducing stress on the engine, it prolongs its lifespan and maintains peak functionality. Rely on this kit to provide unparalleled performance and unwavering reliability for your S63 4.4L engine.

Show More Show Less

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Ships on Aug 14, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMC Performance Air Filter - F10, F11, F18, F07, F12, F13, F06, F01, ...

T#:398706

Part#: FB651/20

Back Ordered

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

BMS Intake - S63tu M5/M6 - Red Filters

T#:38857245

Part#: BMS-INTAKE-F10R

In Stock

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

Back Ordered

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N55 3.0L ...

T#:46890667

Part#: FMEDV104R

Ships in 2 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.

Show More Show Less

Intake - S63tu M5/M6 - Blue Filters

T#:38857243

Part#: BMS-INTAKE-F10B

Ships on Aug 6, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6

T#:49752784

Part#: BMSS63TURACP

Ships on Aug 6, 2026

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

When you’re turning up the boost on your F-Chassis M5 or M6, the factory plastic charge pipes become a known weak link. The BMS Elite Replacement Aluminum Charge Pipes eliminate that failure point with a properly engineered, motorsport-grade solution built for the S63TU twin-turbo V8. Developed by Burger Motorsports specifically for the F10 M5 and F12/F13 M6, these mandrel-bent aluminum charge pipes provide a smooth, unrestricted airflow path from the turbos to the intercoolers, improving throttle response and maintaining consistent boost under load. More importantly, they’re built to survive where the OEM plastic pipes crack, split, and blow apart — especially on tuned or hard-driven cars. CNC-machined flanges, bead-rolled ends, and high-quality silicone couplers ensure a leak-free, secure connection, while all factory sensor ports and mounting locations are retained for a true bolt-on installation. No cutting, no tuning, no compromises — just a clean, OEM-plus upgrade that delivers the reliability your S63TU needs for street, track, and everything in between.

Show More Show Less

Forge Motorsport Atmospheric Blowoff Valve - BMW N55 3.0L

T#:46890666

Part#: FMEDV104A

Ships in 8 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.

Show More Show Less

Burger Motorsports Aluminum Chargepipes - S63TU M5 M6

Not for sale or use in the state of California.

T#:556806

Part#: BMS-F-M5-ACP

Ships on Aug 6, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Though functionally identical to the stock plastic pipes, these Burger Motorsports chargepipes are an improvement in both reliability and versatility. This is due to their black gloss powder coated aluminum construction, giving them greater strength and a better appearance, and the inclusion of a 1/8" NPT bung & cap included in each pipe.

Show More Show Less

Black Walnut Shell 20/30 Blast Media

T#:22690744

Part#: B1100051

Ships in 8 Business Days

Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

This blast media makes DIY carbon cleaning a breeze!

Forge Silicone Vacuum Hoses

T#:558490

Part#: FORGEVAC

Ships on Aug 11, 2026

Starting at $ 14.99 USD

Add to Wish List

Starting at $ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

3MM Silicone Vacuum Hose - Red - 9 Feet

T#:370915

Part#: VC03R

Back Ordered

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

High-quality silicone construction for durability
Superior flexibility for easy installation
Resistant to extreme temperatures
Ensures reliable vacuum pressure for efficient engine operation
Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter.

Show More Show Less

4MM Silicone Vacuum Hose - Blue - 9 Feet

T#:370917

Part#: VC04

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

4MM Silicone Vacuum Hose - Black - 9 Feet

T#:370919

Part#: VC04B

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 6 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Aug 6, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Aug 6, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Aug 6, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Aug 6, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Aug 19, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 6 Series F12 (2012+)

Sub-Categories

Replacement N55 Performance Filter from Burger Motorsport

Key Features:

Enhance Engine Performance with Silicone Vacuum Line

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results