BMW Intake Parts for BMW 6 Series F12 (2012+)

Performance Intake System - F10/11/07 5 Series, F12/13/06 6 Series, E...

T#:20979733

Part#: F10-N55-INT

Ships in 8 Business Days

Starting at $ 219.00 USD

Add to Wish List

Starting at $ 219.00 USD

Add to Wish List

In BMWs with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

Adds up to 10+ Horsepower
Dramatic sound improvement
Super fast install and removal
Improves throttle response
Retains OEM airbox base as a heat shield
Retains OEM cold air ducting
Looks great under the hood
Cleanable and reusable filter
Made in the USA

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

Ships in 2 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"...

T#:28968878

Part#: 1123BMS

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less

BMS Intake - S63tu M5/M6 - Red Filters

T#:38857245

Part#: BMS-INTAKE-F10R

Ships on Oct 27, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6

T#:49752784

Part#: BMSS63TURACP

Ships on Oct 27, 2026

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

When you’re turning up the boost on your F-Chassis M5 or M6, the factory plastic charge pipes become a known weak link. The BMS Elite Replacement Aluminum Charge Pipes eliminate that failure point with a properly engineered, motorsport-grade solution built for the S63TU twin-turbo V8. Developed by Burger Motorsports specifically for the F10 M5 and F12/F13 M6, these mandrel-bent aluminum charge pipes provide a smooth, unrestricted airflow path from the turbos to the intercoolers, improving throttle response and maintaining consistent boost under load. More importantly, they’re built to survive where the OEM plastic pipes crack, split, and blow apart — especially on tuned or hard-driven cars. CNC-machined flanges, bead-rolled ends, and high-quality silicone couplers ensure a leak-free, secure connection, while all factory sensor ports and mounting locations are retained for a true bolt-on installation. No cutting, no tuning, no compromises — just a clean, OEM-plus upgrade that delivers the reliability your S63TU needs for street, track, and everything in between.

Show More Show Less

Burger Motorsports Aluminum Chargepipes - S63TU M5 M6

Not for sale or use in the state of California.

T#:556806

Part#: BMS-F-M5-ACP

Ships on Oct 27, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Though functionally identical to the stock plastic pipes, these Burger Motorsports chargepipes are an improvement in both reliability and versatility. This is due to their black gloss powder coated aluminum construction, giving them greater strength and a better appearance, and the inclusion of a 1/8" NPT bung & cap included in each pipe.

Show More Show Less

Intake - S63tu M5/M6 - Blue Filters

T#:38857243

Part#: BMS-INTAKE-F10B

Ships on Oct 27, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Oct 26, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Oct 27, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Oct 27, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Oct 27, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Nov 6, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 6 Series F12 (2012+)

Sub-Categories

Performance Intake System - F10/11/07 5 Series, F12/13/06 6 Series, E...

BMW F30 E9X TMAP Sensors & PNP Adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

Replacement N55 Performance Filter - Red

Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"...

BMS Intake - S63tu M5/M6 - Red Filters

BMS Replacement Elite Aluminum Charge Pipes - S63TU M5/M6

Burger Motorsports Aluminum Chargepipes - S63TU M5 M6

Intake - S63tu M5/M6 - Blue Filters

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

1 Gallon Methanol Tank - Clear/White

BMS DDP5800 Water/Methanol Injection Pump

2 Gallon Low Profile Universal Methanol Tank

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

1.25 Gallon Heavy-Duty Universal Methanol Tank

Water/Methanol Injection Hose - 20'

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

WMI Inline Filter

Super Atomizing Water/Methanol Injection Nozzles

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results