BMW Transmission Parts for BMW 6 Series F12 (2012+)

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

BMW’s Getrag GS7D36SG Dual-Clutch Transmission is a masterpiece of engineering. It's renowned for its rapid gear changes, robust construction, and direct, motorsport-inspired feel. While the transmission itself delivers exceptional performance, its supporting components don’t always keep pace. The factory plastic oil pan and limited oil capacity compromise cooling efficiency and long-term reliability, especially during high-performance use. With this in mind, we set out to engineer a solution that elevates durability, thermal management, and fluid control to match the transmission’s world-class performance.

We've designed a permanent, high-performance replacement for the flawed OEM pan: a cast-aluminum, increased-capacity upgrade that enhances cooling and durability. Its all-aluminum construction provides a significant upgrade over the OE plastic pan, which is prone to cracking when impacted by road debris. Engineered for those who demand more from their vehicle, our design increases fluid capacity to promote superior cooling and help maintain optimal transmission temperatures, even in the most demanding conditions.

To ensure a leak-free seal, we engineered a heavy-duty Viton gasket specific to their transmission pan design. The Viton material provides exceptional reliability under high temperatures and resists deformation—a common failure point of the factory rubber gasket. For further protection, integrated magnets actively attract and hold metal debris that could otherwise compromise the transmission's longevity. This innovative design keeps your fluid clean and extends the overall life of your drivetrain.

Whether your DCT-equipped BMW serves as a track car or a highway cruiser, this pan ensures your transmission remains cool and efficient, minimizing the risk of overheating and wear.

DESIGN

Durable cast aluminum construction High-capacity design increases fluid volume (~7.5L capacity) Specifically designed to accept the OEM suction filter (28107842828) Hard coat black anodized with raw "Turner" logo KEY BENEFITS

A resilient, reliable replacement for the OE plastic fluid pan—crafted from aluminum for superior durability and features a threaded drain plug to prevent stripped threads Increased fluid capacity and cooling fins work together to provide a drastic increase in cooling Compatibility with the OEM suction filter ensures an easy service KIT CONTENTS

High-Capacity Aluminum Transmission Pan Perimeter Gasket/O-Ring Mounting Screws (14) Drain Plug PRODUCT DEVELOPMENT

Our High-Capacity DCT Transmission Pan was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Kit Includes:

Turner Motorsport ZF 8HP High-Capacity Aluminum Transmission Pan
OE Hengst G8X Filter Installation Kit
Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

Rein Transfer Case Fluid TF 0870 is designed to service your BMW xDrive transfer case, ensuring optimal performance and reliability. This genuine BMW fluid is essential for maintaining the efficiency of your transfer case, especially if you are nearing or exceeding the 60,000-mile mark. Using Rein Transfer Case Fluid TF 0870 helps to catch up on crucial maintenance and keep your vehicle running smoothly.

• Genuine BMW Fluid: Ensures compatibility and peak performance for BMW xDrive transfer cases.
• Optimal Performance: Helps maintain the efficiency of the transfer case, enhancing overall vehicle reliability.
• Preventive Maintenance: Ideal for vehicles approaching or exceeding 60,000 miles to ensure continued smooth operation.
• High-Quality Formulation: Designed to meet BMW's specifications for superior protection and longevity.

URO AT Plug Sealing Sleeve - BMW Multiple Applications

URO AT Plug Sealing Sleeve - BMW Multiple Applications is a high-quality replacement designed to prevent automatic transmission fluid leaks and restore optimal transmission performance. This direct-fit sealing sleeve replaces worn or cracked originals, ensuring a secure and long-lasting seal.

• Direct-fit OE replacement restores factory sealing integrity
• Prevents ATF leakage that can lead to transmission performance issues
• OE-style o-ring profile and durometer ensure proper compression and fit
• Manufactured from high-quality materials to resist extreme heat and ATF corrosion
• Enhances transmission reliability and longevity
• Backed by a 24-month unlimited mileage warranty

Compatible with multiple BMW applications, this URO AT Plug Sealing Sleeve helps maintain smooth shifting and overall transmission efficiency.