Precision Raceworks' Fuel Injector Removal and Installation Tool is one of the highest-rated tools on the market, not only for removal and installation of injectors but also for the installation and compression of the high-pressure seals! For injector removal, simply thread the tool onto the input of the fuel injector and use the slide hammer to tap the injector out. When installing new seals, simply use needle-nose pliers to pinch the old seal and remove it. Once removed, the new seal can be installed using the included expansion tool found stored inside the shaft of the tool. The rest is as easy as 1, 2, 3! Insert the injector into die #1 and count to 10, then insert the injector into die #2 and count to 20, finally insert the injector into die #3 and count to 30, then install your injector.
Show More Show Less
From supplemental fueling to ignition systems and anywhere in between Precision Raceworks, LLC is known for being the premium product manufacture in the market. Precision Raceworks' BMW N55 replacement spark plug wires are the same plug wires that are included in their High-Performance N55 Ignition Kit. These wires are 100% custom design from the ground up by Precision Raceworks, the only company in the world to produce plug wires with boots specific for your N55 BMW to ensure proper fitment and quality. Plug wires are sold in packs of 6 so you get all new plug wires every time. So, replace the one you need and keep the rest for spares or replace all 6. All components used meet or exceed OEM requirements and feature seals that are both dust and water-resistant. Specifications: Weight: 1.8lbs Plug Wire Resistance: 50ohms per-ft Carbon Core: Yes Spiral Core Wire: Yes Silicone Insulation: 8mm High Performance Fiberglass inlayed for strength: Yes
Show More Show Less
The Precision Raceworks Phenolic Spacer is made in the USA from premium fiber impregnated phenolic material. With a Rockwell Hardness of 100 and a conductivity rating of 2.03 it is the perfect material for insulating between heat generating parts such as the cylinder head and other parts you wish to stay cool like the intake manifold. A phenolic spacer works by reducing heat transfer from the cylinder head to the manifold which results in reduction of intake air temperature, allowing for cooler air to enter the cylinders which is more dense and reduces chance of detonation in the cylinder. Our 1/2" phenolic spacer not only provides a thermal insulation between the cylinder head and intake plenum. It has also been designed to make use of factory O-Rings rather than messy gasket maker adhesive to ensure an air tight seal each and every time along with easy installation and removal.
Show More Show Less
If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!
Show More Show Less
If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane gas or 500whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready! Included in the box: New genuine OEM fuel pump bucket assembly - Pre-assembled with Genuine Walbro 450 pump Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less
