BMW 6 Series F13 (2012+)

Replacement N55 Performance Filter, No Hardware

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:26171623

Part#: HW-APX-M14125-90

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

Enhanced strength and safety
Improved pit stop times
Simplified wheel installation and removal
Versatility with extended length wheel studs
Reduced wear on hub threads
Long-term durability and safety
Simplified maintenance and improved efficiency

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

APEX ARC-8 18x10" ET25 Hyper Black Concave Wheel 19.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180705

Part#: ARC81810ET25HBK

In Stock

Sale - Save 15% $ 419.00

This product was last offered at the strikethrough price on
06-30-2026

$ 356.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 419.00

This product was last offered at the strikethrough price on
06-30-2026

$ 356.15 USD

Add to Wish List

18x10" ET25 Hyper Black Concave APEX ARC-8 Wheel 19.95lbs

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x10" ET25 Satin Black Concave Wheel 19.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180704

Part#: ARC81810ET25SMBK

Ships in 2 Business Days

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

18x10" ET25 Satin Black Concave APEX ARC-8 Wheel 19.95lbs

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET35 Anthracite Concave Wheel 18.85lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180765

Part#: ARC81895ET35AN

Ships in 5 Business Days

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

18x9.5" ET35 Anthracite Concave APEX ARC-8 Wheel 18.85lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	35
Weight (lbs):	18.85
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Race Silver Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:342500

Part#: ARC81895ET22RS

Back Ordered

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Silver 18x9.5" ET22 Concave APEX ARC-8 Wheel.

Wheel Specs

Fitment:Rear

Size:18x9.5"

Offset (mm):22

Weight (lbs):19.2

Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit other models with a specific wheel spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

18x10.5" ET22 Brushed Clear APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:4607237

Part#: VS5RS18105ET22BC

Ships in 5 Business Days

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

Digital Oil Pressure Gauge EVO Series - 0-150 Psi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389617

Part#: 216EVOEOP.PSI

In Stock

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Oil Pressure Guage (0-150 PSI)
Instructions
Mounting hardware
Decals
Premium Electric Sender
Wiring harness adapter
Dual color display (Blue or Red)

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588633

Part#: OILVALVE-RED

Ships in 2 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

APEX ARC-8 18x9.5" ET22 Satin Black Concave Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180708

Part#: ARC81895ET22SMBK

In Stock

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

18x9.5" ET22 Satin Black Concave APEX ARC-8 Wheel 19.2lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	22
Weight (lbs):	19.2
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Anthracite Concave Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180710

Part#: ARC81895ET22AN

In Stock

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

18x9.5" ET22 Anthracite Concave APEX ARC-8 Wheel 19.2lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	22
Weight (lbs):	19.2
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Hyper Black Concave Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180709

Part#: ARC81895ET22HBK

Ships in 5 Business Days

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

18x9.5" ET22 Hyper Black Concave APEX ARC-8 Wheel 19.2lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	22
Weight (lbs):	19.2
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Silver Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201372

Part#: EC71910ET25RS

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10.5" ET22 Satin Black Wheel 22.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201398

Part#: TMS201398

Ships on Oct 22, 2026

Sale - Save 15% $ 458.00

This product was last offered at the strikethrough price on
06-30-2026

$ 389.30 USD

Add to Wish List

Qty

Sale - Save 15%

$ 458.00

This product was last offered at the strikethrough price on
06-30-2026

$ 389.30 USD

Add to Wish List

19x10.5" ET22 APEX ARC-8 Wheel 22.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	22.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x10" ET25 Race Silver Wheel 19.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180707

Part#: ARC81810ET25RS

Ships in 8 Business Days

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Silver 18x10" ET25 Silver Concave APEX ARC-8 Wheel.

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to many BMW models and fit other models when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET35 Hyper Black Concave Wheel 18.85lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180764

Part#: ARC81895ET35HBK

Ships on Jul 23, 2026

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

18x9.5" ET35 Hyper Black Concave APEX ARC-8 Wheel 18.85lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	35
Weight (lbs):	18.85
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

GSP Front Wheel Hub & Bearing Assembly - F01, F02, F06, F07, F10, F12...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1196237

Part#: 270010

Ships in 3 Business Days

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

Replace your worn wheel hub assembly with this assembly

APEX ARC-8 19x10" ET25 Silver Wheel 21.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201396

Part#: ARC81910ET25HS

Ships in 5 Business Days

Sale - Save 15% $ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

19x10" ET25 APEX ARC-8 Wheel 21.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	21.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET22 Silver Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201363

Part#: EC71995ET22RS

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

Silver 19x10" ET25 APEX EC-7 Wheel.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to many BMW models and may fit other models when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

EVO Series Digital Oil Temperature Gauge - 100-300°F

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389634

Part#: 216EVOOT.F

Ships in 2 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Oil Temperature Guage (100-300 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Blue or Red)

Show More Show Less

APEX EC-7 19x10.5" ET22 Silver Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201375

Part#: EC719105ET22RS

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10" ET25 Satin Black Wheel 21.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201395

Part#: ARC81910ET25SMBK

Ships in 5 Business Days

Sale - Save 15% $ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

19x10" ET25 APEX ARC-8 Wheel 21.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	21.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10.5" ET22 Anthracite Wheel 22.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201400

Part#: ARC819105ET22AN

Ships in 5 Business Days

Sale - Save 15% $ 469.00

This product was last offered at the strikethrough price on
06-30-2026

$ 398.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 469.00

This product was last offered at the strikethrough price on
06-30-2026

$ 398.65 USD

Add to Wish List

19x10.5" ET27 APEX ARC-8 Wheel 22.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	27
Weight (lbs):	22.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

EVO Series Digital Water Temperature Gauge - 80-280°F

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389626

Part#: 216EVOWGWT.F

Ships in 3 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Water Temperature Guage (80-280 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Green or White)

Show More Show Less

Burger Motorsports F-Series N55 JB4 - Electronic Wastegate - F22/23 F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:567659

Part#: JB4-F30-EWG

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Ready to take your F chassis N55 BMW to the next level? How about up to 60hp to the wheels (80hp crank) on a completely stock car or up to 100hp to the wheels (120hp crank) on a fully modified car? The JB4 features a simple plug and play installation harness for easy installation and includes many features not found on any other tune. Including the ability to enable/disable the tuning from the drivers seat, gear dependent boost control to help with traction, autotuning for E85 mixtures, built-in diagnostic code reading/deleting, expanded engine safety systems, free firmware updates, in-dash boost gauge, the ability to control the exhaust flapper using your BC button, and much more. The JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. For more advanced enthusiasts the BMS DATA or JB4 Mobile cable allows you to connect a laptop or smartphone for additional gauges, data logging, and free firmware updates as we add new features and maps. The JB4 is a full plug and play device that installs and removes in minutes at home without special tools and unlike flash maps that permanently write over your DME with the JB4, your DME is never aware it's running more than the factory power levels. And when you're ready to change things up the JB4 is not VIN locked and can be moved to your next vehicle or resold. Made in the USA. 5 Year Warranty. Note for electronic wastegate models: the EWG add on connector remains optional and can be purchased separately from BMS's upgrades for higher HP applications where direct EWG control is beneficial such as those using an integrated WMI kit or larger turbo.

Show More Show Less

52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587021

Part#: 216BFWAEBOSM.PSI

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

Accurately monitors boost pressure from 30inHg to 30 PSI
Stylish amber and white display for clear visibility
Enhances vehicle performance monitoring capabilities
Easy installation process
Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Show More Show Less

Prosport EVO Series Digital Boost Gauge - 30 InHg/35 PSI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389613

Part#: 216EVOBO.PSI

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

52mm Digital Boost Pressure Guage (30inHg - 35 PSI)
Instructions
Tubing Kit
T-adapter
Premium Electric Sender
Mounting hardware
Blue or Red display

Show More Show Less

EVO Series Digital Oil Temperature Gauge - 100-300°F

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389627

Part#: 216EVOWGOT.F

In Stock

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Oil Temperature Guage (100-300 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Green or White)

Show More Show Less

Prosport Electrical Oil Pressure Gauge - 0-100 Psi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584307

Part#: 216BFWAOPSM.PSI

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

Improves engine monitoring beyond factory gauge capabilities
Early detection of potential issues for preventive maintenance
Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
Compatible with BMW models for easy installation and reliable performance
Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.

Show More Show Less

EVO Series Universal Digital Water Temperature Gauge - 80-280°F ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389633

Part#: 216EVOWT.F

In Stock

$ 78.99

This product was last offered at the strikethrough price on
07-01-2026

$ 71.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 78.99

This product was last offered at the strikethrough price on
07-01-2026

$ 71.99 USD

Limited Qty Sale

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Water Temperature Guage (80-280 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Blue or red)

Show More Show Less

Prosport EVO Series Digital Boost Gauge - 30 InHg/35 PSI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389614

Part#: 216EVOWGBO.PSI

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

52mm Digital Boost Pressure Guage (30inHg - 35 PSI)
Instructions
Tubing Kit
T-adapter
Premium Electric Sender
Mounting hardware
Green or White display

Show More Show Less

EVO Series Digital Volt Gauge - 8-18v

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389632

Part#: 216EVOVO

In Stock

$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD

Limited Qty Sale

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Fuel Pressure Guage (8-18v)
Instructions
Mounting hardware
Decals
Dual color display (Blue or red)

Show More Show Less

45mm Electric Boost Gauge - 30inHg~30 PSI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389622

Part#: 175CLSMARBO-R.PS

In Stock

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

In boosted applications, it's crucial to know the amount of boost pressure you are carrying in order to optimize performance. This 45mm boost gauge from Prosport is the best way to do just that. Featuring a black face, with amber back lighting it will portray your information accurately without blinding you in the process. This guage is designed to used precision electric sensors, so you get the most accurate reading every time.

Key Features:

270 degree dial sweep
Track tested and race proven
Full gauge sweep on start up
Black face, red needle, amber backlit
30inHg to 30PSI
45mm diameter
Includes: Tubing kit, T-Adapter, Electric Sender, quick connect pigtail wiring, Decal and Instructions.

Show More Show Less

Burger Motorsports JB4 Tuner - Type A Harness w/ Pneumatic Wastegate ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402618

Part#: JB4-F10-A

Ships in 2 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: F06 F07 F10 F12 F13 N55 with Pneumatic Wastegate and harness type A

Show More Show Less

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

APEX EC-7 19" Staggered Wheel Set - Race Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560861

Part#: EC71995H105SKT

Ships in 5 Business Days

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence!

Show More Show Less

APEX ARC-8 19x9.5" ET22 Silver Wheel 20.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201387

Part#: ARC81995ET22HS

Ships in 5 Business Days

Sale - Save 15% $ 449.00

This product was last offered at the strikethrough price on
06-30-2026

$ 381.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 449.00

This product was last offered at the strikethrough price on
06-30-2026

$ 381.65 USD

Add to Wish List

Silver 19x9.5" ET22 APEX ARC-8 Wheel.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	20.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit others when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

EVO Series Digital Fuel Pressure Gauge - 0-100 Psi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389624

Part#: 216EVOWGEFP.PSI

Ships in 2 Business Days

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Fuel Pressure Guage (0-100 PSI)
Instructions
Premium fuel sender
Mounting hardware
Decals
Green or white display

Show More Show Less

APEX EC-7 18x10" ET25 Silver Wheel 22.45lbs - PROFILE 3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180721

Part#: EC71810ET25RS

Ships in 2 Business Days

$ 419.00 USD

Add to Wish List

Qty

$ 419.00 USD

Add to Wish List

Silver 18x10" ET25 Concave APEX EC-7 Wheel.

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	22.45
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may be used on other models with a specific wheel spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Burger Motorsports JB4 Tuner - Type B Harness w/ Pneumatic Wastegate ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402619

Part#: JB4-F10-B

Ships on Jul 22, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: F06 F07 F10 F12 F13 N55 with Pneumatic Wastegate and harness type B

Show More Show Less

52mm Supreme Series Boost Gauge Kit - White/Amber with White Pointer/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:557080

Part#: 216CLSDWABOU-R.P

Ships in 2 Business Days

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

BMW & MINI Digital Wideband Air Fuel Gauge Kit - 10.0:1 To 20.0:1 AFR...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389630

Part#: 216EVOAFRWB4.9

Ships in 2 Business Days

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

AFR digital Gauge
Bosch 4.9 5 wire heated O2 sensor
Weld in Bung
Instructions
Wiring harness(Gauge to O2 sensor) 10 feet long
Plug and play wiring harness
Decals
0-5 volt output signal for data logging

Show More Show Less

EVO Series Digital Volt Gauge - 8-18v

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389625

Part#: 216EVOWGVO

Ships in 2 Business Days

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Volt Gauge (8-18v)
Instructions
Mounting hardware
Decals
Dual color display (Green or White)

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Prosport EVO Series Digital Wideband Air Fuel Gauge Kit - 10.0:1 To 2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389623

Part#: 216EVOWGAFRWB4.9

Ships in 2 Business Days

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

AFR digital Gauge
Bosch 4.9 5 wire heated O2 sensor
Weld in Bung
Instructions
Wiring harness(Gauge to O2 sensor) 10 feet long
Plug and play wiring harness
Decals
0-5 volt output signal for data logging

Show More Show Less

APEX EC-7 19"Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560858

Part#: EC71995H105AKT

Ships in 5 Business Days

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

APEX EC-7 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" This set of 9.5" and 10.5" EC-7 wheels is an easy staggered fitment for the E46 M3, E6X M5/6 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9.5" ET22 on the front and a 10.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Replacement N55 Performance Filter from Burger Motorsport

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results