Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

Enhance Vehicle Appearance with Clinched Fender Flares

Crafted from impact-resistant ABS plastic, Clinched manufactures fender flares akin to OE bumpers, ensuring both durability and lightweight properties. These adaptable fender flares offer universal fitting, suitable for various vehicle makes and models with minimal adjustments. Choose between seamlessly blending them with the car's body or showcasing them with visible rivets and edges.

Installation involves rivets and bolts, requiring drilling and cutting of the original fenders for proper fitting. Utilize a heat gun or hair dryer to heat and mold the flares, allowing them to conform to the factory body lines. Their remarkable pliability distinguishes them from fiberglass flares.

Is the rear end of your F13 boring you? Install a trunk spoiler to instantly make your rear end more aggressive. Can be painted to match your vehicle or installed as-is. Install can be completed in minutes with double-sided adhesive.

This product fits the following BMWs:
2011+ F13 6-Series Coupe 640i 640iX 650i 650iX 650iX 4.0 650iX 4.4 M6
2013+ F06 640i 640i xDrive 650i 650i xDrive ALPINA B6X 
2012 F06 M6

This 3D Design trunk spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this spoiler attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look.  Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

9cm "Classic" Universal Fender Flares - Pair are expertly crafted by Clinched from high-quality, impact-resistant ABS plastic, a material commonly used for OEM bumpers. These fender flares are designed to be versatile and can fit a wide range of makes and models with minimal customization.

• Durable Construction: Made from high-quality ABS plastic, offering strength and lightweight properties.
• Universal Fit: Can be installed on various vehicle makes and models with minor adjustments.
• Customizable Appearance: Can be blended with the vehicle body or left with exposed rivets and edges for a distinctive look.
• Easy Installation: Requires drilling and cutting of original fenders; use a heat gun to mold the flares to factory body lines.
• Pliable Material: More flexible compared to fiberglass flares, allowing for easier customization.

These fender flares are installed using rivets and bolts, ensuring a secure fit. The pliable nature of the ABS plastic allows for easy molding and adherence to your vehicle’s contours.

We design our carbon fiber mirror caps to be a direct OEM replacement. All replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not break off easily. Includes one pair of passenger and driver side direct OEM replacement mirror covers.

Install involves removing factory mirror covers and replacing with new carbon fiber mirror caps.

This product fits the following BMWs:
F10 M5
F06 M6
F12 M6
F13 M6

Carbon Fiber Spoiler

This Carbon Fiber spoiler is meticulously constructed using high lightweight carbon fiberglass, ensuring:

• Exceptional durability
• Adjustability for enhanced functionality
• Aerodynamic design for maximum downforce and striking visual appeal

Features:

• Length: 69.50"
• Width: 15.25"
• Rack distance WxH: 7" x 14.75"
• Comes with all necessary components and bolts
• Professional installation is highly recommended for optimal setup

Clinched Fender Flares

Clinched specializes in crafting fender flares using high-quality, impact-resistant ABS plastic, akin to the material used in OE bumpers. These flares exhibit:

• Sturdiness and lightweight design
• Universality for installation on various vehicle makes and models
• Options for blending with the car's body or showcasing exposed rivets and edges

The installation of Clinched Flares necessitates the drilling and cutting of original fenders. By using a heat gun or hairdryer, the flares can be shaped to fit seamlessly along the factory body lines, highlighting their exceptional pliability compared to fiberglass alternatives.

Clinched Universal Fender Flares

Crafted from high-quality, impact-resistant ABS plastic, Clinched manufactures universal fender flares suitable for various makes and models, including BMWs. These flares, akin to OE bumpers, offer exceptional strength combined with lightweight properties. Universally designed, they require minimal customization for installation. You have the option to seamlessly blend them with your car's body or leave them with exposed rivets and edges for a distinct look. Please note, installation involves drilling and cutting the original fenders. Using a heat gun (or hair dryer) aids in molding the flares to conform to your vehicle's factory body lines, thanks to their high pliability, setting them apart from fiberglass alternatives.

Transform your BMW's appearance and durability with Clinched Fender Flares, expertly crafted from premium-grade, impact-resistant ABS plastic. Engineered to match the material of OE bumpers, these flares offer superior strength while remaining lightweight. Designed to fit a wide range of makes and models, they can be seamlessly integrated into your car's body or left to showcase rivets and edges for added flair. Installation involves drilling and cutting your original fenders, with rivets and bolts ensuring a secure attachment. Use a heat gun or hair dryer to mold the flares to your vehicle's contours, taking advantage of their exceptional pliability for a perfect fit.

• High-quality, impact-resistant ABS plastic construction
• Lightweight yet exceptionally strong
• Universal design for versatile compatibility
• Option for blending with car body or showcasing rivets and edges
• Secure installation with rivets and bolts
• Easily molded to follow factory body lines

This Vorsteiner front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 1x1 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles. 

This 3D Design front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install to your factory bumpers & skirts to offer an understated, aggressive performance look.